Then need to let it run correctlly first. 3 steps: 1) CONFIG_VGA_BIOS_ID="8086,27ae" 2) modify VGA rom in hex, offset 46h =0xae 3）ignor the checksun error in payload(seabios....).
may be there are better ways,let me know :-) Thanks! 2011-03-04 zxy__1127 On 3/3/11 9:46 PM, zxy__1127 wrote: Hi I think it's a issue about lvds setting in VGA rom. You can get the vbios from Intel's web site, and you need to modify it to fit your screen. 8086/27ae 8086/27a2 just different ID,because your have let the VGA rom run, so it doesn't matter :-) It should be easier to grab the vbios from the existing BIOS. According to the logs that were attached, at least coreboot did not run the vbios at all. Stefan
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
