Hi,
the following patch aligns several kconfig options to match newconfig:
HT_CHAIN_UNITID_BASE
HT_CHAIN_END_UNITID_BASE
SB_HT_CHAIN_ON_BUS0
SB_HT_CHAIN_UNITID_OFFSET_ONLY
MAX_CPUS
MAX_PHYSICAL_CPUS
ROM_SIZE
TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
Signed-off-by: Patrick Georgi <[email protected]>
Index: src/mainboard/iwill/dk8s2/Kconfig
===================================================================
--- src/mainboard/iwill/dk8s2/Kconfig (revision 5050)
+++ src/mainboard/iwill/dk8s2/Kconfig (working copy)
@@ -64,7 +64,7 @@
config MAX_CPUS
int
- default 4
+ default 2
depends on BOARD_IWILL_DK8S2
config MAX_PHYSICAL_CPUS
@@ -79,17 +79,17 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_IWILL_DK8S2
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x20
depends on BOARD_IWILL_DK8S2
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x1
depends on BOARD_IWILL_DK8S2
config USE_INIT
Index: src/mainboard/iwill/dk8x/Kconfig
===================================================================
--- src/mainboard/iwill/dk8x/Kconfig (revision 5050)
+++ src/mainboard/iwill/dk8x/Kconfig (working copy)
@@ -63,7 +63,7 @@
config MAX_CPUS
int
- default 4
+ default 2
depends on BOARD_IWILL_DK8X
config MAX_PHYSICAL_CPUS
@@ -78,17 +78,17 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_IWILL_DK8X
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x20
depends on BOARD_IWILL_DK8X
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x1
depends on BOARD_IWILL_DK8X
config USE_INIT
Index: src/mainboard/axus/tc320/Kconfig
===================================================================
--- src/mainboard/axus/tc320/Kconfig (revision 5050)
+++ src/mainboard/axus/tc320/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/bcom/winnetp680/Kconfig
===================================================================
--- src/mainboard/bcom/winnetp680/Kconfig (revision 5050)
+++ src/mainboard/bcom/winnetp680/Kconfig (working copy)
@@ -7,7 +7,6 @@
select SUPERIO_WINBOND_W83697HF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/bcom/winnet100/Kconfig
===================================================================
--- src/mainboard/bcom/winnet100/Kconfig (revision 5050)
+++ src/mainboard/bcom/winnet100/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/televideo/tc7020/Kconfig
===================================================================
--- src/mainboard/televideo/tc7020/Kconfig (revision 5050)
+++ src/mainboard/televideo/tc7020/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/broadcom/blast/Kconfig
===================================================================
--- src/mainboard/broadcom/blast/Kconfig (revision 5050)
+++ src/mainboard/broadcom/blast/Kconfig (working copy)
@@ -13,6 +13,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -41,14 +42,9 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 1
depends on BOARD_BROADCOM_BLAST
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_BROADCOM_BLAST
-
config LB_CKS_RANGE_END
int
default 122
@@ -81,12 +77,12 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x1
depends on BOARD_BROADCOM_BLAST
config HT_CHAIN_UNITID_BASE
hex
- default 0x0
+ default 0x6
depends on BOARD_BROADCOM_BLAST
config USE_INIT
Index: src/mainboard/supermicro/h8dmr/Kconfig
===================================================================
--- src/mainboard/supermicro/h8dmr/Kconfig (revision 5050)
+++ src/mainboard/supermicro/h8dmr/Kconfig (working copy)
@@ -12,7 +12,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
- select BOARD_ROMSIZE_KB_512
+ select BOARD_ROMSIZE_KB_1024
config MAINBOARD_DIR
string
@@ -86,7 +86,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_SUPERMICRO_H8DMR
config HT_CHAIN_UNITID_BASE
Index: src/mainboard/supermicro/h8dme/Kconfig
===================================================================
--- src/mainboard/supermicro/h8dme/Kconfig (revision 5050)
+++ src/mainboard/supermicro/h8dme/Kconfig (working copy)
@@ -87,7 +87,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_SUPERMICRO_H8DME
config HT_CHAIN_UNITID_BASE
Index: src/mainboard/soyo/sy-6ba-plus-iii/Kconfig
===================================================================
--- src/mainboard/soyo/sy-6ba-plus-iii/Kconfig (revision 5050)
+++ src/mainboard/soyo/sy-6ba-plus-iii/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_ITE_IT8671F
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/kontron/986lcd-m/Kconfig
===================================================================
--- src/mainboard/kontron/986lcd-m/Kconfig (revision 5050)
+++ src/mainboard/kontron/986lcd-m/Kconfig (working copy)
@@ -62,6 +62,11 @@
default 18
depends on BOARD_KONTRON_986LCD_M
+config MAX_CPUS
+ int
+ default 4
+ depends on BOARD_KONTRON_986LCD_M
+
config MAX_PHYSICAL_CPUS
int
default 2
Index: src/mainboard/kontron/kt690/Kconfig
===================================================================
--- src/mainboard/kontron/kt690/Kconfig (revision 5050)
+++ src/mainboard/kontron/kt690/Kconfig (working copy)
@@ -15,7 +15,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_512
+ select BOARD_ROMSIZE_KB_1024
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
Index: src/mainboard/a-trend/atc-6240/Kconfig
===================================================================
--- src/mainboard/a-trend/atc-6240/Kconfig (revision 5050)
+++ src/mainboard/a-trend/atc-6240/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83627HF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/a-trend/atc-6220/Kconfig
===================================================================
--- src/mainboard/a-trend/atc-6220/Kconfig (revision 5050)
+++ src/mainboard/a-trend/atc-6220/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/gigabyte/m57sli/Kconfig
===================================================================
--- src/mainboard/gigabyte/m57sli/Kconfig (revision 5050)
+++ src/mainboard/gigabyte/m57sli/Kconfig (working copy)
@@ -13,7 +13,6 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select HAVE_ACPI_TABLES
select K8_REV_F_SUPPORT
select BOARD_ROMSIZE_KB_512
@@ -115,7 +114,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_GIGABYTE_M57SLI
config USE_INIT
Index: src/mainboard/gigabyte/ga_2761gxdk/Kconfig
===================================================================
--- src/mainboard/gigabyte/ga_2761gxdk/Kconfig (revision 5050)
+++ src/mainboard/gigabyte/ga_2761gxdk/Kconfig (working copy)
@@ -11,7 +11,6 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select K8_REV_F_SUPPORT
select BOARD_ROMSIZE_KB_512
@@ -112,7 +111,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_GIGABYTE_GA_2761GXDK
config USE_INIT
Index: src/mainboard/gigabyte/ga-6bxc/Kconfig
===================================================================
--- src/mainboard/gigabyte/ga-6bxc/Kconfig (revision 5050)
+++ src/mainboard/gigabyte/ga-6bxc/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_ITE_IT8671F
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/digitallogic/msm800sev/Kconfig
===================================================================
--- src/mainboard/digitallogic/msm800sev/Kconfig (revision 5050)
+++ src/mainboard/digitallogic/msm800sev/Kconfig (working copy)
@@ -8,7 +8,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/digitallogic/msm586seg/Kconfig
===================================================================
--- src/mainboard/digitallogic/msm586seg/Kconfig (revision 5050)
+++ src/mainboard/digitallogic/msm586seg/Kconfig (working copy)
@@ -3,7 +3,7 @@
select ARCH_X86
select CPU_AMD_SC520
select HAVE_PIRQ_TABLE
- select BOARD_ROMSIZE_KB_256
+ select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
string
Index: src/mainboard/mitac/6513wu/Kconfig
===================================================================
--- src/mainboard/mitac/6513wu/Kconfig (revision 5050)
+++ src/mainboard/mitac/6513wu/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_SMSC_SMSCSUPERIO
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/olpc/btest/Kconfig
===================================================================
--- src/mainboard/olpc/btest/Kconfig (revision 5050)
+++ src/mainboard/olpc/btest/Kconfig (working copy)
@@ -5,7 +5,6 @@
select NORTHBRIDGE_AMD_GX2
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/olpc/rev_a/Kconfig
===================================================================
--- src/mainboard/olpc/rev_a/Kconfig (revision 5050)
+++ src/mainboard/olpc/rev_a/Kconfig (working copy)
@@ -5,7 +5,6 @@
select NORTHBRIDGE_AMD_GX2
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/technologic/ts5300/Kconfig
===================================================================
--- src/mainboard/technologic/ts5300/Kconfig (revision 5050)
+++ src/mainboard/technologic/ts5300/Kconfig (working copy)
@@ -3,7 +3,7 @@
select ARCH_X86
select CPU_AMD_SC520
select HAVE_PIRQ_TABLE
- select BOARD_ROMSIZE_KB_256
+ select BOARD_ROMSIZE_KB_128
config MAINBOARD_DIR
string
Index: src/mainboard/amd/pistachio/Kconfig
===================================================================
--- src/mainboard/amd/pistachio/Kconfig (revision 5050)
+++ src/mainboard/amd/pistachio/Kconfig (working copy)
@@ -14,7 +14,7 @@
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select WAIT_BEFORE_CPUS_INIT
select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_512
+ select BOARD_ROMSIZE_KB_1024
config MAINBOARD_DIR
string
@@ -78,17 +78,17 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 1
depends on BOARD_AMD_PISTACHIO
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x1
depends on BOARD_AMD_PISTACHIO
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x0
depends on BOARD_AMD_PISTACHIO
config USE_INIT
Index: src/mainboard/amd/dbm690t/Kconfig
===================================================================
--- src/mainboard/amd/dbm690t/Kconfig (revision 5050)
+++ src/mainboard/amd/dbm690t/Kconfig (working copy)
@@ -15,7 +15,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select BOARD_ROMSIZE_KB_512
+ select BOARD_ROMSIZE_KB_1024
config MAINBOARD_DIR
string
Index: src/mainboard/amd/rumba/Kconfig
===================================================================
--- src/mainboard/amd/rumba/Kconfig (revision 5050)
+++ src/mainboard/amd/rumba/Kconfig (working copy)
@@ -25,7 +25,6 @@
select NORTHBRIDGE_AMD_GX2
select SOUTHBRIDGE_AMD_CS5536
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/amd/norwich/Kconfig
===================================================================
--- src/mainboard/amd/norwich/Kconfig (revision 5050)
+++ src/mainboard/amd/norwich/Kconfig (working copy)
@@ -7,7 +7,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/amd/db800/Kconfig
===================================================================
--- src/mainboard/amd/db800/Kconfig (revision 5050)
+++ src/mainboard/amd/db800/Kconfig (working copy)
@@ -8,7 +8,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/biostar/m6tba/Kconfig
===================================================================
--- src/mainboard/biostar/m6tba/Kconfig (revision 5050)
+++ src/mainboard/biostar/m6tba/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_SMSC_SMSCSUPERIO
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/rca/rm4100/Kconfig
===================================================================
--- src/mainboard/rca/rm4100/Kconfig (revision 5050)
+++ src/mainboard/rca/rm4100/Kconfig (working copy)
@@ -7,7 +7,6 @@
select SUPERIO_SMSC_SMSCSUPERIO
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/nec/powermate2000/Kconfig
===================================================================
--- src/mainboard/nec/powermate2000/Kconfig (revision 5050)
+++ src/mainboard/nec/powermate2000/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_SMSC_SMSCSUPERIO
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/azza/pt-6ibd/Kconfig
===================================================================
--- src/mainboard/azza/pt-6ibd/Kconfig (revision 5050)
+++ src/mainboard/azza/pt-6ibd/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/iei/nova4899r/Kconfig
===================================================================
--- src/mainboard/iei/nova4899r/Kconfig (revision 5050)
+++ src/mainboard/iei/nova4899r/Kconfig (working copy)
@@ -29,7 +29,6 @@
select PIRQ_ROUTE
select HAVE_OPTION_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/iei/pcisa-lx-800-r10/Kconfig
===================================================================
--- src/mainboard/iei/pcisa-lx-800-r10/Kconfig (revision 5050)
+++ src/mainboard/iei/pcisa-lx-800-r10/Kconfig (working copy)
@@ -8,7 +8,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/iei/juki-511p/Kconfig
===================================================================
--- src/mainboard/iei/juki-511p/Kconfig (revision 5050)
+++ src/mainboard/iei/juki-511p/Kconfig (working copy)
@@ -28,7 +28,6 @@
select PIRQ_ROUTE
select HAVE_OPTION_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/hp/dl145_g3/Kconfig
===================================================================
--- src/mainboard/hp/dl145_g3/Kconfig (revision 5050)
+++ src/mainboard/hp/dl145_g3/Kconfig (working copy)
@@ -14,6 +14,7 @@
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -82,12 +83,12 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x1
depends on BOARD_HP_DL145_G3
config HT_CHAIN_UNITID_BASE
hex
- default 0x0
+ default 0x6
depends on BOARD_HP_DL145_G3
config USE_INIT
Index: src/mainboard/hp/e_vectra_p2706t/Kconfig
===================================================================
--- src/mainboard/hp/e_vectra_p2706t/Kconfig (revision 5050)
+++ src/mainboard/hp/e_vectra_p2706t/Kconfig (working copy)
@@ -30,7 +30,6 @@
select SUPERIO_NSC_PC87360
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/tyan/s2912/Kconfig
===================================================================
--- src/mainboard/tyan/s2912/Kconfig (revision 5050)
+++ src/mainboard/tyan/s2912/Kconfig (working copy)
@@ -12,7 +12,6 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select K8_REV_F_SUPPORT
select BOARD_ROMSIZE_KB_512
@@ -93,12 +92,12 @@
config MAX_CPUS
int
- default 2
+ default 4
depends on BOARD_TYAN_S2912
config MAX_PHYSICAL_CPUS
int
- default 1
+ default 2
depends on BOARD_TYAN_S2912
config HW_MEM_HOLE_SIZE_AUTO_INC
@@ -113,7 +112,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_TYAN_S2912
config USE_INIT
Index: src/mainboard/tyan/s2880/Kconfig
===================================================================
--- src/mainboard/tyan/s2880/Kconfig (revision 5050)
+++ src/mainboard/tyan/s2880/Kconfig (working copy)
@@ -10,6 +10,7 @@
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -23,7 +24,7 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_TYAN_S2880
config LB_CKS_RANGE_END
@@ -53,7 +54,7 @@
config MAX_CPUS
int
- default 4
+ default 2
depends on BOARD_TYAN_S2880
config MAX_PHYSICAL_CPUS
@@ -68,12 +69,12 @@
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x1
depends on BOARD_TYAN_S2880
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x20
depends on BOARD_TYAN_S2880
config USE_INIT
@@ -86,16 +87,6 @@
default n
depends on BOARD_TYAN_S2880
-config SB_HT_CHAIN_ON_BUS0
- int
- default 0
- depends on BOARD_TYAN_S2880
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S2880
-
config IRQ_SLOT_COUNT
int
default 9
Index: src/mainboard/tyan/s2881/Kconfig
===================================================================
--- src/mainboard/tyan/s2881/Kconfig (revision 5050)
+++ src/mainboard/tyan/s2881/Kconfig (working copy)
@@ -10,6 +10,7 @@
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -23,7 +24,7 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_TYAN_S2881
config LB_CKS_RANGE_END
@@ -86,16 +87,6 @@
default n
depends on BOARD_TYAN_S2881
-config SB_HT_CHAIN_ON_BUS0
- int
- default 0
- depends on BOARD_TYAN_S2881
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S2881
-
config IRQ_SLOT_COUNT
int
default 9
Index: src/mainboard/tyan/s1846/Kconfig
===================================================================
--- src/mainboard/tyan/s1846/Kconfig (revision 5050)
+++ src/mainboard/tyan/s1846/Kconfig (working copy)
@@ -26,7 +26,6 @@
select SOUTHBRIDGE_INTEL_I82371EB
select SUPERIO_NSC_PC87309
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/tyan/s4880/Kconfig
===================================================================
--- src/mainboard/tyan/s4880/Kconfig (revision 5050)
+++ src/mainboard/tyan/s4880/Kconfig (working copy)
@@ -13,6 +13,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -41,14 +42,9 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_TYAN_S4880
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S4880
-
config LB_CKS_RANGE_END
int
default 122
@@ -71,22 +67,22 @@
config MAX_CPUS
int
- default 4
+ default 8
depends on BOARD_TYAN_S4880
config MAX_PHYSICAL_CPUS
int
- default 2
+ default 4
depends on BOARD_TYAN_S4880
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_TYAN_S4880
config HT_CHAIN_UNITID_BASE
hex
- default 0x0
+ default 0x1
depends on BOARD_TYAN_S4880
config USE_INIT
@@ -94,11 +90,6 @@
default n
depends on BOARD_TYAN_S4880
-config SB_HT_CHAIN_ON_BUS0
- int
- default 2
- depends on BOARD_TYAN_S4880
-
config IRQ_SLOT_COUNT
int
default 11
Index: src/mainboard/tyan/s2891/Kconfig
===================================================================
--- src/mainboard/tyan/s2891/Kconfig (revision 5050)
+++ src/mainboard/tyan/s2891/Kconfig (working copy)
@@ -11,7 +11,8 @@
select HAVE_MP_TABLE
select SERIAL_CPU_INIT
select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_1024
+ select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -88,16 +89,6 @@
default n
depends on BOARD_TYAN_S2891
-config SB_HT_CHAIN_ON_BUS0
- int
- default 2
- depends on BOARD_TYAN_S2891
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S2891
-
config IRQ_SLOT_COUNT
int
default 11
Index: src/mainboard/tyan/s2882/Kconfig
===================================================================
--- src/mainboard/tyan/s2882/Kconfig (revision 5050)
+++ src/mainboard/tyan/s2882/Kconfig (working copy)
@@ -10,6 +10,7 @@
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -23,7 +24,7 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_TYAN_S2882
config LB_CKS_RANGE_END
@@ -68,12 +69,12 @@
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x1
depends on BOARD_TYAN_S2882
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x20
depends on BOARD_TYAN_S2882
config USE_INIT
@@ -86,16 +87,6 @@
default n
depends on BOARD_TYAN_S2882
-config SB_HT_CHAIN_ON_BUS0
- int
- default 0
- depends on BOARD_TYAN_S2882
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S2882
-
config IRQ_SLOT_COUNT
int
default 9
Index: src/mainboard/tyan/s4882/Kconfig
===================================================================
--- src/mainboard/tyan/s4882/Kconfig (revision 5050)
+++ src/mainboard/tyan/s4882/Kconfig (working copy)
@@ -13,6 +13,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -41,14 +42,9 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_TYAN_S4882
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S4882
-
config LB_CKS_RANGE_END
int
default 122
@@ -71,22 +67,22 @@
config MAX_CPUS
int
- default 4
+ default 8
depends on BOARD_TYAN_S4882
config MAX_PHYSICAL_CPUS
int
- default 2
+ default 4
depends on BOARD_TYAN_S4882
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_TYAN_S4882
config HT_CHAIN_UNITID_BASE
hex
- default 0x0
+ default 0x1
depends on BOARD_TYAN_S4882
config USE_INIT
@@ -94,11 +90,6 @@
default n
depends on BOARD_TYAN_S4882
-config SB_HT_CHAIN_ON_BUS0
- int
- default 2
- depends on BOARD_TYAN_S4882
-
config IRQ_SLOT_COUNT
int
default 11
Index: src/mainboard/tyan/s2885/Kconfig
===================================================================
--- src/mainboard/tyan/s2885/Kconfig (revision 5050)
+++ src/mainboard/tyan/s2885/Kconfig (working copy)
@@ -10,6 +10,7 @@
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -86,16 +87,6 @@
default n
depends on BOARD_TYAN_S2885
-config SB_HT_CHAIN_ON_BUS0
- int
- default 0
- depends on BOARD_TYAN_S2885
-
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_TYAN_S2885
-
config IRQ_SLOT_COUNT
int
default 9
Index: src/mainboard/pcengines/alix1c/Kconfig
===================================================================
--- src/mainboard/pcengines/alix1c/Kconfig (revision 5050)
+++ src/mainboard/pcengines/alix1c/Kconfig (working copy)
@@ -8,7 +8,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
Index: src/mainboard/artecgroup/dbe61/Kconfig
===================================================================
--- src/mainboard/artecgroup/dbe61/Kconfig (revision 5050)
+++ src/mainboard/artecgroup/dbe61/Kconfig (working copy)
@@ -7,7 +7,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/asi/mb_5blgp/Kconfig
===================================================================
--- src/mainboard/asi/mb_5blgp/Kconfig (revision 5050)
+++ src/mainboard/asi/mb_5blgp/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/asi/mb_5blmp/Kconfig
===================================================================
--- src/mainboard/asi/mb_5blmp/Kconfig (revision 5050)
+++ src/mainboard/asi/mb_5blmp/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/abit/be6-ii_v2_0/Kconfig
===================================================================
--- src/mainboard/abit/be6-ii_v2_0/Kconfig (revision 5050)
+++ src/mainboard/abit/be6-ii_v2_0/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/lippert/roadrunner-lx/Kconfig
===================================================================
--- src/mainboard/lippert/roadrunner-lx/Kconfig (revision 5050)
+++ src/mainboard/lippert/roadrunner-lx/Kconfig (working copy)
@@ -8,7 +8,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
Index: src/mainboard/lippert/frontrunner/Kconfig
===================================================================
--- src/mainboard/lippert/frontrunner/Kconfig (revision 5050)
+++ src/mainboard/lippert/frontrunner/Kconfig (working copy)
@@ -5,7 +5,6 @@
select NORTHBRIDGE_AMD_GX2
select SOUTHBRIDGE_AMD_CS5535
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select HAVE_PIRQ_TABLE
select BOARD_ROMSIZE_KB_256
Index: src/mainboard/lippert/spacerunner-lx/Kconfig
===================================================================
--- src/mainboard/lippert/spacerunner-lx/Kconfig (revision 5050)
+++ src/mainboard/lippert/spacerunner-lx/Kconfig (working copy)
@@ -8,7 +8,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select USE_DCACHE_RAM
select USE_PRINTK_IN_CAR
select BOARD_ROMSIZE_KB_512
Index: src/mainboard/via/vt8454c/Kconfig
===================================================================
--- src/mainboard/via/vt8454c/Kconfig (revision 5050)
+++ src/mainboard/via/vt8454c/Kconfig (working copy)
@@ -10,7 +10,7 @@
# select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_1024
+ select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
string
Index: src/mainboard/via/pc2500e/Kconfig
===================================================================
--- src/mainboard/via/pc2500e/Kconfig (revision 5050)
+++ src/mainboard/via/pc2500e/Kconfig (working copy)
@@ -9,7 +9,6 @@
select HAVE_MP_TABLE
select SMP
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/dell/s1850/Kconfig
===================================================================
--- src/mainboard/dell/s1850/Kconfig (revision 5050)
+++ src/mainboard/dell/s1850/Kconfig (working copy)
@@ -44,12 +44,12 @@
config MAX_CPUS
int
- default 2
+ default 4
depends on BOARD_DELL_S1850
config MAX_PHYSICAL_CPUS
int
- default 2
+ default 1
depends on BOARD_DELL_S1850
config USE_INIT
Index: src/mainboard/compaq/deskpro_en_sff_p600/Kconfig
===================================================================
--- src/mainboard/compaq/deskpro_en_sff_p600/Kconfig (revision 5050)
+++ src/mainboard/compaq/deskpro_en_sff_p600/Kconfig (working copy)
@@ -28,7 +28,6 @@
select SUPERIO_NSC_PC97317
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/roda/rk886ex/Kconfig
===================================================================
--- src/mainboard/roda/rk886ex/Kconfig (revision 5050)
+++ src/mainboard/roda/rk886ex/Kconfig (working copy)
@@ -58,6 +58,11 @@
default 18
depends on BOARD_RODA_RK886EX
+config MAX_CPUS
+ int
+ default 4
+ depends on BOARD_RODA_RK886EX
+
config MAX_PHYSICAL_CPUS
int
default 2
Index: src/mainboard/msi/ms6119/Kconfig
===================================================================
--- src/mainboard/msi/ms6119/Kconfig (revision 5050)
+++ src/mainboard/msi/ms6119/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/msi/ms6147/Kconfig
===================================================================
--- src/mainboard/msi/ms6147/Kconfig (revision 5050)
+++ src/mainboard/msi/ms6147/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/msi/ms6156/Kconfig
===================================================================
--- src/mainboard/msi/ms6156/Kconfig (revision 5050)
+++ src/mainboard/msi/ms6156/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/msi/ms9282/Kconfig
===================================================================
--- src/mainboard/msi/ms9282/Kconfig (revision 5050)
+++ src/mainboard/msi/ms9282/Kconfig (working copy)
@@ -11,7 +11,6 @@
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select K8_REV_F_SUPPORT
select BOARD_ROMSIZE_KB_512
@@ -42,7 +41,7 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 1
depends on BOARD_MSI_MS9282
config LB_CKS_RANGE_START
@@ -87,12 +86,12 @@
config MAX_CPUS
int
- default 2
+ default 4
depends on BOARD_MSI_MS9282
config MAX_PHYSICAL_CPUS
int
- default 1
+ default 2
depends on BOARD_MSI_MS9282
config HW_MEM_HOLE_SIZE_AUTO_INC
@@ -107,7 +106,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_MSI_MS9282
config USE_INIT
Index: src/mainboard/msi/ms9185/Kconfig
===================================================================
--- src/mainboard/msi/ms9185/Kconfig (revision 5050)
+++ src/mainboard/msi/ms9185/Kconfig (working copy)
@@ -14,6 +14,7 @@
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -45,11 +46,6 @@
default 2
depends on BOARD_MSI_MS9185
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_MSI_MS9185
-
config LB_CKS_RANGE_END
int
default 122
@@ -82,12 +78,12 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x1
depends on BOARD_MSI_MS9185
config HT_CHAIN_UNITID_BASE
hex
- default 0x0
+ default 0x6
depends on BOARD_MSI_MS9185
config USE_INIT
@@ -95,11 +91,6 @@
default n
depends on BOARD_MSI_MS9185
-config SB_HT_CHAIN_ON_BUS0
- int
- default 2
- depends on BOARD_MSI_MS9185
-
config IRQ_SLOT_COUNT
int
default 11
Index: src/mainboard/msi/ms7260/Kconfig
===================================================================
--- src/mainboard/msi/ms7260/Kconfig (revision 5050)
+++ src/mainboard/msi/ms7260/Kconfig (working copy)
@@ -12,7 +12,6 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select K8_REV_F_SUPPORT
select BOARD_ROMSIZE_KB_512
@@ -113,7 +112,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_MSI_MS7260
config USE_INIT
Index: src/mainboard/arima/hdama/Kconfig
===================================================================
--- src/mainboard/arima/hdama/Kconfig (revision 5050)
+++ src/mainboard/arima/hdama/Kconfig (working copy)
@@ -72,7 +72,7 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 1
+ default 0
depends on BOARD_ARIMA_HDAMA
config HT_CHAIN_END_UNITID_BASE
Index: src/mainboard/sunw/ultra40/Kconfig
===================================================================
--- src/mainboard/sunw/ultra40/Kconfig (revision 5050)
+++ src/mainboard/sunw/ultra40/Kconfig (working copy)
@@ -80,7 +80,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_SUNW_ULTRA40
config HT_CHAIN_UNITID_BASE
Index: src/mainboard/advantech/pcm-5820/Kconfig
===================================================================
--- src/mainboard/advantech/pcm-5820/Kconfig (revision 5050)
+++ src/mainboard/advantech/pcm-5820/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/eaglelion/5bcm/Kconfig
===================================================================
--- src/mainboard/eaglelion/5bcm/Kconfig (revision 5050)
+++ src/mainboard/eaglelion/5bcm/Kconfig (working copy)
@@ -28,7 +28,6 @@
select HAVE_PIRQ_TABLE
select PIRQ_ROUTE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/newisys/khepri/Kconfig
===================================================================
--- src/mainboard/newisys/khepri/Kconfig (revision 5050)
+++ src/mainboard/newisys/khepri/Kconfig (working copy)
@@ -13,6 +13,7 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select BOARD_ROMSIZE_KB_512
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
config MAINBOARD_DIR
string
@@ -41,14 +42,9 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_NEWISYS_KHEPRI
-config SB_HT_CHAIN_UNITID_OFFSET_ONLY
- bool
- default n
- depends on BOARD_NEWISYS_KHEPRI
-
config LB_CKS_RANGE_END
int
default 122
@@ -81,12 +77,12 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_NEWISYS_KHEPRI
config HT_CHAIN_UNITID_BASE
hex
- default 0x0
+ default 0x1
depends on BOARD_NEWISYS_KHEPRI
config USE_INIT
Index: src/mainboard/technexion/tim8690/Kconfig
===================================================================
--- src/mainboard/technexion/tim8690/Kconfig (revision 5050)
+++ src/mainboard/technexion/tim8690/Kconfig (working copy)
@@ -79,17 +79,17 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 1
depends on BOARD_TECHNEXION_TIM8690
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x1
depends on BOARD_TECHNEXION_TIM8690
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x0
depends on BOARD_TECHNEXION_TIM8690
config USE_INIT
Index: src/mainboard/ibm/e326/Kconfig
===================================================================
--- src/mainboard/ibm/e326/Kconfig (revision 5050)
+++ src/mainboard/ibm/e326/Kconfig (working copy)
@@ -78,17 +78,17 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_IBM_E326
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x20
depends on BOARD_IBM_E326
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x1
depends on BOARD_IBM_E326
config USE_INIT
Index: src/mainboard/ibm/e325/Kconfig
===================================================================
--- src/mainboard/ibm/e325/Kconfig (revision 5050)
+++ src/mainboard/ibm/e325/Kconfig (working copy)
@@ -78,17 +78,17 @@
config SB_HT_CHAIN_ON_BUS0
int
- default 2
+ default 0
depends on BOARD_IBM_E325
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x6
+ default 0x20
depends on BOARD_IBM_E325
config HT_CHAIN_UNITID_BASE
hex
- default 0xa
+ default 0x1
depends on BOARD_IBM_E325
config USE_INIT
Index: src/mainboard/nvidia/l1_2pvv/Kconfig
===================================================================
--- src/mainboard/nvidia/l1_2pvv/Kconfig (revision 5050)
+++ src/mainboard/nvidia/l1_2pvv/Kconfig (working copy)
@@ -12,7 +12,6 @@
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select LIFT_BSP_APIC_ID
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select K8_REV_F_SUPPORT
select BOARD_ROMSIZE_KB_512
@@ -93,12 +92,12 @@
config MAX_CPUS
int
- default 2
+ default 4
depends on BOARD_NVIDIA_L1_2PVV
config MAX_PHYSICAL_CPUS
int
- default 1
+ default 2
depends on BOARD_NVIDIA_L1_2PVV
config HW_MEM_HOLE_SIZE_AUTO_INC
@@ -113,7 +112,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_NVIDIA_L1_2PVV
config USE_INIT
Index: src/mainboard/intel/d945gclf/Kconfig
===================================================================
--- src/mainboard/intel/d945gclf/Kconfig (revision 5050)
+++ src/mainboard/intel/d945gclf/Kconfig (working copy)
@@ -34,7 +34,7 @@
select UDELAY_LAPIC
select HAVE_ACPI_TABLES
select HAVE_SMI_HANDLER
- select BOARD_ROMSIZE_KB_1024
+ select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
string
@@ -81,6 +81,11 @@
default 18
depends on BOARD_INTEL_D945GCLF
+config MAX_CPUS
+ int
+ default 4
+ depends on BOARD_INTEL_D945GCLF
+
config MAX_PHYSICAL_CPUS
int
default 2
Index: src/mainboard/intel/truxton/Kconfig
===================================================================
--- src/mainboard/intel/truxton/Kconfig (revision 5050)
+++ src/mainboard/intel/truxton/Kconfig (working copy)
@@ -51,3 +51,7 @@
default 0x2680
depends on BOARD_INTEL_TRUXTON
+config MAX_CPUS
+ int
+ default 4
+ depends on BOARD_INTEL_TRUXTON
Index: src/mainboard/intel/mtarvon/Kconfig
===================================================================
--- src/mainboard/intel/mtarvon/Kconfig (revision 5050)
+++ src/mainboard/intel/mtarvon/Kconfig (working copy)
@@ -49,3 +49,8 @@
hex
default 0x2680
depends on BOARD_INTEL_MTARVON
+
+config MAX_CPUS
+ int
+ default 4
+ depends on BOARD_INTEL_MTARVON
Index: src/mainboard/intel/eagleheights/Kconfig
===================================================================
--- src/mainboard/intel/eagleheights/Kconfig (revision 5050)
+++ src/mainboard/intel/eagleheights/Kconfig (working copy)
@@ -11,7 +11,6 @@
select MMCONF_SUPPORT
select USE_PRINTK_IN_CAR
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select AP_IN_SIPI_WAIT
select HAVE_ACPI_TABLES
select BOARD_ROMSIZE_KB_1024
@@ -61,6 +60,11 @@
default 18
depends on BOARD_INTEL_EAGLEHEIGHTS
+config MAX_CPUS
+ int
+ default 4
+ depends on BOARD_INTEL_EAGLEHEIGHTS
+
config MAX_PHYSICAL_CPUS
int
default 2
Index: src/mainboard/asus/Kconfig
===================================================================
--- src/mainboard/asus/Kconfig (revision 5050)
+++ src/mainboard/asus/Kconfig (working copy)
@@ -26,6 +26,7 @@
source "src/mainboard/asus/a8v-e_se/Kconfig"
source "src/mainboard/asus/p2b/Kconfig"
source "src/mainboard/asus/p2b-d/Kconfig"
+source "src/mainboard/asus/p2b-ds/Kconfig"
source "src/mainboard/asus/p2b-f/Kconfig"
source "src/mainboard/asus/p3b-f/Kconfig"
source "src/mainboard/asus/m2v-mx_se/Kconfig"
Index: src/mainboard/asus/mew-am/Kconfig
===================================================================
--- src/mainboard/asus/mew-am/Kconfig (revision 5050)
+++ src/mainboard/asus/mew-am/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_SMSC_SMSCSUPERIO
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/asus/p2b/Kconfig
===================================================================
--- src/mainboard/asus/p2b/Kconfig (revision 5050)
+++ src/mainboard/asus/p2b/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/asus/p2b-d/Kconfig
===================================================================
--- src/mainboard/asus/p2b-d/Kconfig (revision 5050)
+++ src/mainboard/asus/p2b-d/Kconfig (working copy)
@@ -29,7 +29,6 @@
select HAVE_MP_TABLE
select SMP
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/asus/p2b-f/Kconfig
===================================================================
--- src/mainboard/asus/p2b-f/Kconfig (revision 5050)
+++ src/mainboard/asus/p2b-f/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/asus/p2b-ds/Kconfig
===================================================================
--- src/mainboard/asus/p2b-ds/Kconfig (revision 5050)
+++ src/mainboard/asus/p2b-ds/Kconfig (working copy)
@@ -29,7 +29,6 @@
select HAVE_MP_TABLE
select SMP
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/asus/p3b-f/Kconfig
===================================================================
--- src/mainboard/asus/p3b-f/Kconfig (revision 5050)
+++ src/mainboard/asus/p3b-f/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_WINBOND_W83977TF
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_256
config MAINBOARD_DIR
Index: src/mainboard/asus/mew-vm/Kconfig
===================================================================
--- src/mainboard/asus/mew-vm/Kconfig (revision 5050)
+++ src/mainboard/asus/mew-vm/Kconfig (working copy)
@@ -27,7 +27,6 @@
select SUPERIO_SMSC_LPC47B272
select HAVE_PIRQ_TABLE
select UDELAY_TSC
- select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
Index: src/mainboard/asus/a8n_e/Kconfig
===================================================================
--- src/mainboard/asus/a8n_e/Kconfig (revision 5050)
+++ src/mainboard/asus/a8n_e/Kconfig (working copy)
@@ -80,7 +80,7 @@
config HT_CHAIN_END_UNITID_BASE
hex
- default 0x0
+ default 0x20
depends on BOARD_ASUS_A8N_E
config HT_CHAIN_UNITID_BASE
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
