Hi -----Original Message----- From: Myles Watson [mailto:[email protected]] Sent: Friday, March 06, 2009 10:12 PM To: Wang, Qingpei; 'Rudolf Marek'; 'Kevin O'Connor' Cc: Bao, Zheng; Xie, Michael; Perley, Tim; 'Coreboot' Subject: RE: [coreboot] Problems about booting windows xp
> -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Wang, Qingpei > Sent: Friday, March 06, 2009 2:44 AM > To: Rudolf Marek > Cc: Bao, Zheng; Xie, Michael; Perley, Tim; Coreboot > Subject: Re: [coreboot] Problems about booting windows xp > > Hi, > Today I tried to install a pure new windows xp which seabios in > dbm690t it > Hand off as show figure. I also put my dmes.txt here and e820 map also > data.txt from acpidump. It all works fine with linux. As my dbm690t has > 1G Ram, so I Take (1024-128)*1024*1024-64)1024. It looks like you have DMI enabled. Is that from SeaBIOS? I turned it in config.h since it looks emulator specific. Kevin or Rudolf, do you use it when you boot XP? [Jason, Wang] I really have no idea about DMI, and I also checked the SeaBIOS configuration file and gained nothing. Watson, what is the path of the file"config.h"? > By the way, is there anybody who know how to use acpiexec? I can not use > it smoothly. I've been muddling through. I found that the history command has been useful to save some typing and frustration when I have typing errors. The other commands I've used: resources execute namespace help It turns out that you can't load multiple tables into acpiexec, which can be a pain. I patched the source and replaced one table, then I can load the other. [Jason, Wang] how did you do that? Now I really need some tools to debug the acpi. Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
