occam25 commented on code in PR #7359: URL: https://github.com/apache/incubator-nuttx/pull/7359#discussion_r1000281350
########## arch/arm/src/stm32h7/hardware/stm32h7x3xx_pwr.h: ########## @@ -121,16 +121,24 @@ /* Power control register 3 (CR3) */ -#define STM32_PWR_CR3_BYPASS (1 << 0) /* Bit 0: Power management unit bypass */ -#define STM32_PWR_CR3_LDOEN (1 << 1) /* Bit 1: Low drop-out regulator enable */ -#define STM32_PWR_CR3_LDOESCUEN (1 << 2) /* Bit 2: Supply configuration update enable */ - /* Bits 3-7: Reserved */ -#define STM32_PWR_CR3_VBE (1 << 8) /* Bit 8: VBAT charging enable */ -#define STM32_PWR_CR3_VBRS (1 << 9) /* Bit 9: VBAT charging resistor selection */ - /* Bits 10-23: Reserved */ -#define STM32_PWR_CR3_USB33DEN (1 << 24) /* Bit 24: VDD33USB voltage level detector enable */ -#define STM32_PWR_CR3_USBREGEN (1 << 25) /* Bit 25: USB regulator enable */ -#define STM32_PWR_CR3_USB33RDY (1 << 26) /* Bit 26: USB supply ready */ +#define STM32_PWR_CR3_BYPASS (1 << 0) /* Bit 0: Power management unit bypass */ +#define STM32_PWR_CR3_LDOEN (1 << 1) /* Bit 1: Low drop-out regulator enable */ +#define STM32_PWR_CR3_LDOESCUEN (1 << 2) /* Bit 2: Supply configuration update enable */ +#define STM32_PWR_CR3_SMPSEXTHP (1 << 3) /* Bit 3: SMPS step-down converter external power delivery selection */ Review Comment: I don't see it necessary. I could create a new config for that (CONFIG_H7_HAS_SMPS doesn't seem to exist) but I've seen other implementations for other MCUs and that check is not implemented. WDYT? -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: commits-unsubscr...@nuttx.apache.org For queries about this service, please contact Infrastructure at: us...@infra.apache.org
