GUIDINGLI commented on PR #7113:
URL: https://github.com/apache/incubator-nuttx/pull/7113#issuecomment-1250562818
@masayuki2009
I have tried sabre-6quad:smp, both QEMU & real board, and can't reproduce
your problem.
real board, step:
./tools/configure.sh sabre-6quad:smp -j8
make -j8
sudo systemctl restart tftpd-hpa
sudo cp nuttx.bin /srv/tftp/
board:
setenv ipaddr 192.168.31.56
setenv serverip 192.168.31.57
tftp 0x10800000 nuttx.bin
go 0x10800000
Here is the log:
U-Boot 2016.03 (Dec 25 2017 - 22:47:32 +0800)
CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
CPU: Automotive temperature grade (-40C to 125C) at 40C
Reset cause: POR
Board: MX6-SabreSD
I2C: ready
DRAM: 1 GiB
PMIC: PFUZE100 ID=0x10
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
*** Warning - bad CRC, using default environment
No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In: serial
Out: serial
Err: serial
switch to partitions #0, OK
mmc1 is current device
Net: FEC [PRIME]
Normal Boot
Hit any key to stop autoboot: 0
=>
=>
=>
=> setenv ipaddr 192.168.31.56
=> setenv serverip 192.168.31.57
=> tftp 0x10800000 nuttx.bin
Using FEC device
TFTP from server 192.168.31.57; our IP address is 192.168.31.56
Filename 'nuttx.bin'.
Load address: 0x10800000
6.2 MiB/s
done
Bytes transferred = 130108 (1fc3c hex)
=>
Using FEC device
TFTP from server 192.168.31.57; our IP address is 192.168.31.56
Filename 'nuttx.bin'.
Load address: 0x10800000
5.2 MiB/s
done
Bytes transferred = 130108 (1fc3c hex)
=> go 0x10800000
## Starting application at 0x10800000 ...
NuttShell (NSH) NuttX-10.4.0
nsh>
nsh> ps
PID GROUP CPU PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK
USED FILLED COMMAND
0 0 0 0 FIFO Kthread N-- Assigned 00000000 001000
000432 43.2% CPU0 IDLE
1 1 1 0 FIFO Kthread N-- Running 00000000 001000
000664 66.4% CPU1 IDLE
2 2 2 0 FIFO Kthread N-- Running 00000000 001000
000664 66.4% CPU2 IDLE
3 3 3 0 FIFO Kthread N-- Running 00000000 001000
000664 66.4% CPU3 IDLE
4 4 --- 192 RR Kthread --- Waiting Semaphore 00000000 001992
000416 20.8% hpwork 0x108227d4
5 5 0 100 RR Task --- Running 00000000 002000
001240 62.0% nsh_main
nsh>
nsh> hello
Hello, World!!
--
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.
To unsubscribe, e-mail: commits-unsubscr...@nuttx.apache.org
For queries about this service, please contact Infrastructure at:
us...@infra.apache.org
