This is an automated email from the ASF dual-hosted git repository.
davsclaus pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/camel.git
The following commit(s) were added to refs/heads/master by this push:
new 82ce7b3 Regen
82ce7b3 is described below
commit 82ce7b38328f3e166a7d9c9e934b226c4f85bf60
Author: Claus Ibsen <[email protected]>
AuthorDate: Thu Jun 4 06:39:45 2020 +0200
Regen
---
.../ROOT/pages/debezium-mongodb-component.adoc | 16 ++++++++--------
.../modules/ROOT/pages/debezium-mysql-component.adoc | 20 ++++++++++----------
.../ROOT/pages/debezium-postgres-component.adoc | 16 ++++++++--------
.../ROOT/pages/debezium-sqlserver-component.adoc | 16 ++++++++--------
4 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/docs/components/modules/ROOT/pages/debezium-mongodb-component.adoc
b/docs/components/modules/ROOT/pages/debezium-mongodb-component.adoc
index 02f497f..58536ba 100644
--- a/docs/components/modules/ROOT/pages/debezium-mongodb-component.adoc
+++ b/docs/components/modules/ROOT/pages/debezium-mongodb-component.adoc
@@ -72,14 +72,14 @@ The Debezium MongoDB Connector component supports 43
options, which are listed b
| *collectionBlacklist* (mongodb) | Description is not available here, please
check Debezium website for corresponding key 'collection.blacklist'
description. | | String
| *collectionWhitelist* (mongodb) | The collections for which changes are to
be captured | | String
| *connectBackoffInitialDelayMs* (mongodb) | The initial delay when trying to
reconnect to a primary after a connection cannot be made or when no primary is
available. Defaults to 1 second (1000 ms). | 1s | long
-| *connectBackoffMaxDelayMs* (mongodb) | The maximum delay when trying to
reconnect to a primary after a connection cannot be made or when no primary is
available. Defaults to 120 second (120,000 ms). | 120s | long
+| *connectBackoffMaxDelayMs* (mongodb) | The maximum delay when trying to
reconnect to a primary after a connection cannot be made or when no primary is
available. Defaults to 120 second (120,000 ms). | 2m | long
| *connectMaxAttempts* (mongodb) | Maximum number of failed connection
attempts to a replica set primary before an exception occurs and task is
aborted. Defaults to 16, which with the defaults for
'connect.backoff.initial.delay.ms' and 'connect.backoff.max.delay.ms' results
in just over 20 minutes of attempts before failing. | 16 | int
| *databaseBlacklist* (mongodb) | The databases for which changes are to be
excluded | | String
| *databaseHistoryFileFilename* (mongodb) | The path to the file that will be
used to record the database history | | String
| *databaseWhitelist* (mongodb) | The databases for which changes are to be
captured | | String
| *fieldBlacklist* (mongodb) | Description is not available here, please check
Debezium website for corresponding key 'field.blacklist' description. | |
String
| *fieldRenames* (mongodb) | Description is not available here, please check
Debezium website for corresponding key 'field.renames' description. | | String
-| *heartbeatIntervalMs* (mongodb) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (mongodb) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (mongodb) | The prefix that is used to name
heartbeat topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat |
String
| *initialSyncMaxThreads* (mongodb) | Maximum number of threads used to
perform an initial sync of the collections in a replica set. Defaults to 1. | 1
| int
| *maxBatchSize* (mongodb) | Maximum size of each batch of source records.
Defaults to 2048. | 2048 | int
@@ -91,9 +91,9 @@ The Debezium MongoDB Connector component supports 43 options,
which are listed b
| *mongodbSslEnabled* (mongodb) | Should connector use SSL to connect to
MongoDB instances | false | boolean
| *mongodbSslInvalidHostname Allowed* (mongodb) | Whether invalid host names
are allowed when using SSL. If true the connection will not prevent
man-in-the-middle attacks | false | boolean
| *mongodbUser* (mongodb) | Database user for connecting to MongoDB, if
necessary. | | String
-| *pollIntervalMs* (mongodb) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 0.5s |
long
+| *pollIntervalMs* (mongodb) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 500ms |
long
| *skippedOperations* (mongodb) | The comma-separated list of operations to
skip during streaming, defined as: 'i' for inserts; 'u' for updates; 'd' for
deletes. By default, no operations will be skipped. | | String
-| *snapshotDelayMs* (mongodb) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *snapshotDelayMs* (mongodb) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (mongodb) | The maximum number of records that should be
loaded into memory while performing a snapshot | | int
| *snapshotMode* (mongodb) | The criteria for running a snapshot upon startup
of the connector. Options include: 'initial' (the default) to specify the
connector should always perform an initial sync when required; 'never' to
specify the connector should never perform an initial sync | initial | String
| *sourceStructVersion* (mongodb) | A version of the format of the publicly
visible source part in the message | v2 | String
@@ -146,14 +146,14 @@ with the following path and query parameters:
| *collectionBlacklist* (mongodb) | Description is not available here, please
check Debezium website for corresponding key 'collection.blacklist'
description. | | String
| *collectionWhitelist* (mongodb) | The collections for which changes are to
be captured | | String
| *connectBackoffInitialDelayMs* (mongodb) | The initial delay when trying to
reconnect to a primary after a connection cannot be made or when no primary is
available. Defaults to 1 second (1000 ms). | 1s | long
-| *connectBackoffMaxDelayMs* (mongodb) | The maximum delay when trying to
reconnect to a primary after a connection cannot be made or when no primary is
available. Defaults to 120 second (120,000 ms). | 120s | long
+| *connectBackoffMaxDelayMs* (mongodb) | The maximum delay when trying to
reconnect to a primary after a connection cannot be made or when no primary is
available. Defaults to 120 second (120,000 ms). | 2m | long
| *connectMaxAttempts* (mongodb) | Maximum number of failed connection
attempts to a replica set primary before an exception occurs and task is
aborted. Defaults to 16, which with the defaults for
'connect.backoff.initial.delay.ms' and 'connect.backoff.max.delay.ms' results
in just over 20 minutes of attempts before failing. | 16 | int
| *databaseBlacklist* (mongodb) | The databases for which changes are to be
excluded | | String
| *databaseHistoryFileFilename* (mongodb) | The path to the file that will be
used to record the database history | | String
| *databaseWhitelist* (mongodb) | The databases for which changes are to be
captured | | String
| *fieldBlacklist* (mongodb) | Description is not available here, please check
Debezium website for corresponding key 'field.blacklist' description. | |
String
| *fieldRenames* (mongodb) | Description is not available here, please check
Debezium website for corresponding key 'field.renames' description. | | String
-| *heartbeatIntervalMs* (mongodb) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (mongodb) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (mongodb) | The prefix that is used to name
heartbeat topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat |
String
| *initialSyncMaxThreads* (mongodb) | Maximum number of threads used to
perform an initial sync of the collections in a replica set. Defaults to 1. | 1
| int
| *maxBatchSize* (mongodb) | Maximum size of each batch of source records.
Defaults to 2048. | 2048 | int
@@ -165,9 +165,9 @@ with the following path and query parameters:
| *mongodbSslEnabled* (mongodb) | Should connector use SSL to connect to
MongoDB instances | false | boolean
| *mongodbSslInvalidHostname Allowed* (mongodb) | Whether invalid host names
are allowed when using SSL. If true the connection will not prevent
man-in-the-middle attacks | false | boolean
| *mongodbUser* (mongodb) | Database user for connecting to MongoDB, if
necessary. | | String
-| *pollIntervalMs* (mongodb) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 0.5s |
long
+| *pollIntervalMs* (mongodb) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 500ms |
long
| *skippedOperations* (mongodb) | The comma-separated list of operations to
skip during streaming, defined as: 'i' for inserts; 'u' for updates; 'd' for
deletes. By default, no operations will be skipped. | | String
-| *snapshotDelayMs* (mongodb) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *snapshotDelayMs* (mongodb) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (mongodb) | The maximum number of records that should be
loaded into memory while performing a snapshot | | int
| *snapshotMode* (mongodb) | The criteria for running a snapshot upon startup
of the connector. Options include: 'initial' (the default) to specify the
connector should always perform an initial sync when required; 'never' to
specify the connector should never perform an initial sync | initial | String
| *sourceStructVersion* (mongodb) | A version of the format of the publicly
visible source part in the message | v2 | String
diff --git a/docs/components/modules/ROOT/pages/debezium-mysql-component.adoc
b/docs/components/modules/ROOT/pages/debezium-mysql-component.adoc
index 5b337e5..9b161ec 100644
--- a/docs/components/modules/ROOT/pages/debezium-mysql-component.adoc
+++ b/docs/components/modules/ROOT/pages/debezium-mysql-component.adoc
@@ -80,14 +80,14 @@ The Debezium MySQL Connector component supports 73 options,
which are listed bel
| *binlogBufferSize* (mysql) | The size of a look-ahead buffer used by the
binlog reader to decide whether the transaction in progress is going to be
committed or rolled back. Use 0 to disable look-ahead buffering. Defaults to 0
(i.e. buffering is disabled). | 0 | int
| *columnBlacklist* (mysql) | Description is not available here, please check
Debezium website for corresponding key 'column.blacklist' description. | |
String
| *connectKeepAlive* (mysql) | Whether a separate thread should be used to
ensure the connection is kept alive. | true | boolean
-| *connectKeepAliveIntervalMs* (mysql) | Interval in milliseconds to wait for
connection checking if keep alive thread is used. | 60s | long
+| *connectKeepAliveIntervalMs* (mysql) | Interval in milliseconds to wait for
connection checking if keep alive thread is used. | 1m | long
| *connectTimeoutMs* (mysql) | Maximum time in milliseconds to wait after
trying to connect to the database before timing out. | 30s | int
| *databaseBlacklist* (mysql) | Description is not available here, please
check Debezium website for corresponding key 'database.blacklist' description.
| | String
| *databaseHistory* (mysql) | The name of the DatabaseHistory class that
should be used to store and recover database schema changes. The configuration
properties for the history are prefixed with the 'database.history.' string. |
io.debezium.relational.history.FileDatabaseHistory | String
| *databaseHistoryFileFilename* (mysql) | The path to the file that will be
used to record the database history | | String
| *databaseHistoryKafkaBootstrap Servers* (mysql) | A list of host/port pairs
that the connector will use for establishing the initial connection to the
Kafka cluster for retrieving database schema history previously stored by the
connector. This should point to the same Kafka cluster used by the Kafka
Connect process. | | String
| *databaseHistoryKafkaRecovery Attempts* (mysql) | The number of attempts in
a row that no data are returned from Kafka before recover completes. The
maximum amount of time to wait after receiving no data is (recovery.attempts) x
(recovery.poll.interval.ms). | 100 | int
-| *databaseHistoryKafkaRecovery PollIntervalMs* (mysql) | The number of
milliseconds to wait while polling for persisted data during recovery. | 0.1s |
int
+| *databaseHistoryKafkaRecovery PollIntervalMs* (mysql) | The number of
milliseconds to wait while polling for persisted data during recovery. | 100ms
| int
| *databaseHistoryKafkaTopic* (mysql) | The name of the topic for the database
schema history | | String
| *databaseHistorySkipUnparseable Ddl* (mysql) | Controls the action Debezium
will take when it meets a DDL statement in binlog, that it cannot parse.By
default the connector will stop operating but by changing the setting it can
ignore the statements which it cannot parse. If skipping is enabled then
Debezium can miss metadata changes. | false | boolean
| *databaseHistoryStoreOnly MonitoredTablesDdl* (mysql) | Controls what DDL
will Debezium store in database history.By default (false) Debezium will store
all incoming DDL statements. If set to truethen only DDL that manipulates a
monitored table will be stored. | false | boolean
@@ -114,7 +114,7 @@ The Debezium MySQL Connector component supports 73 options,
which are listed bel
| *gtidSourceExcludes* (mysql) | The source UUIDs used to exclude GTID ranges
when determine the starting position in the MySQL server's binlog. | | String
| *gtidSourceFilterDmlEvents* (mysql) | If set to true, we will only produce
DML events into Kafka for transactions that were written on mysql servers with
UUIDs matching the filters defined by the gtid.source.includes or
gtid.source.excludes configuration options, if they are specified. | true |
boolean
| *gtidSourceIncludes* (mysql) | The source UUIDs used to include GTID ranges
when determine the starting position in the MySQL server's binlog. | | String
-| *heartbeatIntervalMs* (mysql) | Length of an interval in milli-seconds in in
which the connector periodically sends heartbeat messages to a heartbeat topic.
Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (mysql) | Length of an interval in milli-seconds in in
which the connector periodically sends heartbeat messages to a heartbeat topic.
Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (mysql) | The prefix that is used to name heartbeat
topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat | String
| *includeQuery* (mysql) | Whether the connector should include the original
SQL query that generated the change event. Note: This option requires MySQL be
configured with the binlog_rows_query_log_events option set to ON. Query will
not be present for events generated from snapshot. WARNING: Enabling this
option may expose tables or fields explicitly blacklisted or masked by
including the original SQL statement in the change event. For this reason the
default value is 'false'. | false | [...]
| *includeSchemaChanges* (mysql) | Whether the connector should publish
changes in the database schema to a Kafka topic with the same name as the
database server ID. Each schema change will be recorded using a key that
contains the database name and whose value includes the DDL statement(s).The
default is 'true'. This is independent of how the connector internally records
database history. | true | boolean
@@ -122,8 +122,8 @@ The Debezium MySQL Connector component supports 73 options,
which are listed bel
| *maxBatchSize* (mysql) | Maximum size of each batch of source records.
Defaults to 2048. | 2048 | int
| *maxQueueSize* (mysql) | Maximum size of the queue for change events read
from the database log but not yet recorded or forwarded. Defaults to 8192, and
should always be larger than the maximum batch size. | 8192 | int
| *messageKeyColumns* (mysql) | A semicolon-separated list of expressions that
match fully-qualified tables and column(s) to be used as message key. Each
expression must match the pattern ':',where the table names could be defined as
(DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific
connector,and the key columns are a comma-separated list of columns
representing the custom key. For any table without an explicit key
configuration the table's primary key column(s) [...]
-| *pollIntervalMs* (mysql) | Frequency in milliseconds to wait for new change
events to appear after receiving no events. Defaults to 500ms. | 0.5s | long
-| *snapshotDelayMs* (mysql) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *pollIntervalMs* (mysql) | Frequency in milliseconds to wait for new change
events to appear after receiving no events. Defaults to 500ms. | 500ms | long
+| *snapshotDelayMs* (mysql) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (mysql) | The maximum number of records that should be
loaded into memory while performing a snapshot | | int
| *snapshotLockingMode* (mysql) | Controls how long the connector holds onto
the global read lock while it is performing a snapshot. The default is
'minimal', which means the connector holds the global read lock (and thus
prevents any updates) for just the initial portion of the snapshot while the
database schemas and other metadata are being read. The remaining work in a
snapshot involves selecting all rows from each table, and this can be done
using the snapshot process' REPEATABLE REA [...]
| *snapshotMode* (mysql) | The criteria for running a snapshot upon startup of
the connector. Options include: 'when_needed' to specify that the connector run
a snapshot upon startup whenever it deems it necessary; 'initial' (the default)
to specify the connector can run a snapshot only when no offsets are available
for the logical server name; 'initial_only' same as 'initial' except the
connector should stop after completing the snapshot and before it would
normally read the binlog; and [...]
@@ -184,14 +184,14 @@ with the following path and query parameters:
| *binlogBufferSize* (mysql) | The size of a look-ahead buffer used by the
binlog reader to decide whether the transaction in progress is going to be
committed or rolled back. Use 0 to disable look-ahead buffering. Defaults to 0
(i.e. buffering is disabled). | 0 | int
| *columnBlacklist* (mysql) | Description is not available here, please check
Debezium website for corresponding key 'column.blacklist' description. | |
String
| *connectKeepAlive* (mysql) | Whether a separate thread should be used to
ensure the connection is kept alive. | true | boolean
-| *connectKeepAliveIntervalMs* (mysql) | Interval in milliseconds to wait for
connection checking if keep alive thread is used. | 60s | long
+| *connectKeepAliveIntervalMs* (mysql) | Interval in milliseconds to wait for
connection checking if keep alive thread is used. | 1m | long
| *connectTimeoutMs* (mysql) | Maximum time in milliseconds to wait after
trying to connect to the database before timing out. | 30s | int
| *databaseBlacklist* (mysql) | Description is not available here, please
check Debezium website for corresponding key 'database.blacklist' description.
| | String
| *databaseHistory* (mysql) | The name of the DatabaseHistory class that
should be used to store and recover database schema changes. The configuration
properties for the history are prefixed with the 'database.history.' string. |
io.debezium.relational.history.FileDatabaseHistory | String
| *databaseHistoryFileFilename* (mysql) | The path to the file that will be
used to record the database history | | String
| *databaseHistoryKafkaBootstrap Servers* (mysql) | A list of host/port pairs
that the connector will use for establishing the initial connection to the
Kafka cluster for retrieving database schema history previously stored by the
connector. This should point to the same Kafka cluster used by the Kafka
Connect process. | | String
| *databaseHistoryKafkaRecovery Attempts* (mysql) | The number of attempts in
a row that no data are returned from Kafka before recover completes. The
maximum amount of time to wait after receiving no data is (recovery.attempts) x
(recovery.poll.interval.ms). | 100 | int
-| *databaseHistoryKafkaRecovery PollIntervalMs* (mysql) | The number of
milliseconds to wait while polling for persisted data during recovery. | 0.1s |
int
+| *databaseHistoryKafkaRecovery PollIntervalMs* (mysql) | The number of
milliseconds to wait while polling for persisted data during recovery. | 100ms
| int
| *databaseHistoryKafkaTopic* (mysql) | The name of the topic for the database
schema history | | String
| *databaseHistorySkipUnparseable Ddl* (mysql) | Controls the action Debezium
will take when it meets a DDL statement in binlog, that it cannot parse.By
default the connector will stop operating but by changing the setting it can
ignore the statements which it cannot parse. If skipping is enabled then
Debezium can miss metadata changes. | false | boolean
| *databaseHistoryStoreOnly MonitoredTablesDdl* (mysql) | Controls what DDL
will Debezium store in database history.By default (false) Debezium will store
all incoming DDL statements. If set to truethen only DDL that manipulates a
monitored table will be stored. | false | boolean
@@ -218,7 +218,7 @@ with the following path and query parameters:
| *gtidSourceExcludes* (mysql) | The source UUIDs used to exclude GTID ranges
when determine the starting position in the MySQL server's binlog. | | String
| *gtidSourceFilterDmlEvents* (mysql) | If set to true, we will only produce
DML events into Kafka for transactions that were written on mysql servers with
UUIDs matching the filters defined by the gtid.source.includes or
gtid.source.excludes configuration options, if they are specified. | true |
boolean
| *gtidSourceIncludes* (mysql) | The source UUIDs used to include GTID ranges
when determine the starting position in the MySQL server's binlog. | | String
-| *heartbeatIntervalMs* (mysql) | Length of an interval in milli-seconds in in
which the connector periodically sends heartbeat messages to a heartbeat topic.
Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (mysql) | Length of an interval in milli-seconds in in
which the connector periodically sends heartbeat messages to a heartbeat topic.
Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (mysql) | The prefix that is used to name heartbeat
topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat | String
| *includeQuery* (mysql) | Whether the connector should include the original
SQL query that generated the change event. Note: This option requires MySQL be
configured with the binlog_rows_query_log_events option set to ON. Query will
not be present for events generated from snapshot. WARNING: Enabling this
option may expose tables or fields explicitly blacklisted or masked by
including the original SQL statement in the change event. For this reason the
default value is 'false'. | false | [...]
| *includeSchemaChanges* (mysql) | Whether the connector should publish
changes in the database schema to a Kafka topic with the same name as the
database server ID. Each schema change will be recorded using a key that
contains the database name and whose value includes the DDL statement(s).The
default is 'true'. This is independent of how the connector internally records
database history. | true | boolean
@@ -226,8 +226,8 @@ with the following path and query parameters:
| *maxBatchSize* (mysql) | Maximum size of each batch of source records.
Defaults to 2048. | 2048 | int
| *maxQueueSize* (mysql) | Maximum size of the queue for change events read
from the database log but not yet recorded or forwarded. Defaults to 8192, and
should always be larger than the maximum batch size. | 8192 | int
| *messageKeyColumns* (mysql) | A semicolon-separated list of expressions that
match fully-qualified tables and column(s) to be used as message key. Each
expression must match the pattern ':',where the table names could be defined as
(DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific
connector,and the key columns are a comma-separated list of columns
representing the custom key. For any table without an explicit key
configuration the table's primary key column(s) [...]
-| *pollIntervalMs* (mysql) | Frequency in milliseconds to wait for new change
events to appear after receiving no events. Defaults to 500ms. | 0.5s | long
-| *snapshotDelayMs* (mysql) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *pollIntervalMs* (mysql) | Frequency in milliseconds to wait for new change
events to appear after receiving no events. Defaults to 500ms. | 500ms | long
+| *snapshotDelayMs* (mysql) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (mysql) | The maximum number of records that should be
loaded into memory while performing a snapshot | | int
| *snapshotLockingMode* (mysql) | Controls how long the connector holds onto
the global read lock while it is performing a snapshot. The default is
'minimal', which means the connector holds the global read lock (and thus
prevents any updates) for just the initial portion of the snapshot while the
database schemas and other metadata are being read. The remaining work in a
snapshot involves selecting all rows from each table, and this can be done
using the snapshot process' REPEATABLE REA [...]
| *snapshotMode* (mysql) | The criteria for running a snapshot upon startup of
the connector. Options include: 'when_needed' to specify that the connector run
a snapshot upon startup whenever it deems it necessary; 'initial' (the default)
to specify the connector can run a snapshot only when no offsets are available
for the logical server name; 'initial_only' same as 'initial' except the
connector should stop after completing the snapshot and before it would
normally read the binlog; and [...]
diff --git
a/docs/components/modules/ROOT/pages/debezium-postgres-component.adoc
b/docs/components/modules/ROOT/pages/debezium-postgres-component.adoc
index 91df8ba..dc00be7 100644
--- a/docs/components/modules/ROOT/pages/debezium-postgres-component.adoc
+++ b/docs/components/modules/ROOT/pages/debezium-postgres-component.adoc
@@ -86,7 +86,7 @@ The Debezium PostgresSQL Connector component supports 67
options, which are list
| *decimalHandlingMode* (postgres) | Specify how DECIMAL and NUMERIC columns
should be represented in change events, including:'precise' (the default) uses
java.math.BigDecimal to represent values, which are encoded in the change
events using a binary representation and Kafka Connect's
'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent
values; 'double' represents values using Java's 'double', which may not offer
the precision but will be far easier to use in [...]
| *eventProcessingFailureHandling Mode* (postgres) | Specify how failures
during processing of events (i.e. when encountering a corrupted event) should
be handled, including:'fail' (the default) an exception indicating the
problematic event and its position is raised, causing the connector to be
stopped; 'warn' the problematic event and its position will be logged and the
event will be skipped;'ignore' the problematic event will be skipped. | fail |
String
| *heartbeatActionQuery* (postgres) | The query executed with every heartbeat.
Defaults to an empty string. | | String
-| *heartbeatIntervalMs* (postgres) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (postgres) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (postgres) | The prefix that is used to name
heartbeat topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat |
String
| *hstoreHandlingMode* (postgres) | Specify how HSTORE columns should be
represented in change events, including:'json' represents values as
string-ified JSON (default)'map' represents values as a key/value map | json |
String
| *includeUnknownDatatypes* (postgres) | Specify whether the fields of data
type not supported by Debezium should be processed:'false' (the default) omits
the fields; 'true' converts the field into an implementation dependent binary
representation. | false | boolean
@@ -95,7 +95,7 @@ The Debezium PostgresSQL Connector component supports 67
options, which are list
| *maxQueueSize* (postgres) | Maximum size of the queue for change events read
from the database log but not yet recorded or forwarded. Defaults to 8192, and
should always be larger than the maximum batch size. | 8192 | int
| *messageKeyColumns* (postgres) | A semicolon-separated list of expressions
that match fully-qualified tables and column(s) to be used as message key. Each
expression must match the pattern ':',where the table names could be defined as
(DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific
connector,and the key columns are a comma-separated list of columns
representing the custom key. For any table without an explicit key
configuration the table's primary key column [...]
| *pluginName* (postgres) | The name of the Postgres logical decoding plugin
installed on the server. Supported values are 'decoderbufs' and 'wal2json'.
Defaults to 'decoderbufs'. | decoderbufs | String
-| *pollIntervalMs* (postgres) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 0.5s |
long
+| *pollIntervalMs* (postgres) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 500ms |
long
| *provideTransactionMetadata* (postgres) | Enables transaction metadata
extraction together with event counting | false | boolean
| *publicationName* (postgres) | The name of the Postgres 10 publication used
for streaming changes from a plugin.Defaults to 'dbz_publication' |
dbz_publication | String
| *schemaBlacklist* (postgres) | The schemas for which events must not be
captured | | String
@@ -107,7 +107,7 @@ The Debezium PostgresSQL Connector component supports 67
options, which are list
| *slotRetryDelayMs* (postgres) | The number of milli-seconds to wait between
retry attempts when the connector fails to connect to a replication slot. | 10s
| long
| *slotStreamParams* (postgres) | Any optional parameters used by logical
decoding plugin. Semi-colon separated. E.g.
'add-tables=public.table,public.table2;include-lsn=true' | | String
| *snapshotCustomClass* (postgres) | When 'snapshot.mode' is set as custom,
this setting must be set to specify a fully qualified class name to load (via
the default class loader).This class must implement the 'Snapshotter' interface
and is called on each app boot to determine whether to do a snapshot and how to
build queries. | | String
-| *snapshotDelayMs* (postgres) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *snapshotDelayMs* (postgres) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (postgres) | The maximum number of records that should
be loaded into memory while performing a snapshot | | int
| *snapshotLockTimeoutMs* (postgres) | The maximum number of millis to wait
for table locks at the beginning of a snapshot. If locks cannot be acquired in
this time frame, the snapshot will be aborted. Defaults to 10 seconds | 10s |
long
| *snapshotMode* (postgres) | The criteria for running a snapshot upon startup
of the connector. Options include: 'always' to specify that the connector run a
snapshot each time it starts up; 'initial' (the default) to specify the
connector can run a snapshot only when no offsets are available for the logical
server name; 'initial_only' same as 'initial' except the connector should stop
after completing the snapshot and before it would normally start emitting
changes;'never' to specify t [...]
@@ -119,7 +119,7 @@ The Debezium PostgresSQL Connector component supports 67
options, which are list
| *timePrecisionMode* (postgres) | Time, date, and timestamps can be
represented with different kinds of precisions, including:'adaptive' (the
default) bases the precision of time, date, and timestamp values on the
database column's precision; 'adaptive_time_microseconds' like 'adaptive' mode,
but TIME fields always use microseconds precision;'connect' always represents
time, date, and timestamp values using Kafka Connect's built-in representations
for Time, Date, and Timestamp, which us [...]
| *toastedValuePlaceholder* (postgres) | Specify the constant that will be
provided by Debezium to indicate that the original value is a toasted value not
provided by the database.If starts with 'hex:' prefix it is expected that the
rest of the string repesents hexadecimally encoded octets. |
__debezium_unavailable_value | String
| *tombstonesOnDelete* (postgres) | Whether delete operations should be
represented by a delete event and a subsquenttombstone event (true) or only by
a delete event (false). Emitting the tombstone event (the default behavior)
allows Kafka to completely delete all events pertaining to the given key once
the source record got deleted. | false | boolean
-| *xminFetchIntervalMs* (postgres) | Specify how often (in ms) the xmin will
be fetched from the replication slot. This xmin value is exposed by the slot
which gives a lower bound of where a new replication slot could start from. The
lower the value, the more likely this value is to be the current 'true' value,
but the bigger the performance cost. The bigger the value, the less likely this
value is to be the current 'true' value, but the lower the performance penalty.
The default is set [...]
+| *xminFetchIntervalMs* (postgres) | Specify how often (in ms) the xmin will
be fetched from the replication slot. This xmin value is exposed by the slot
which gives a lower bound of where a new replication slot could start from. The
lower the value, the more likely this value is to be the current 'true' value,
but the bigger the performance cost. The bigger the value, the less likely this
value is to be the current 'true' value, but the lower the performance penalty.
The default is set [...]
|===
// component options: END
@@ -184,7 +184,7 @@ with the following path and query parameters:
| *decimalHandlingMode* (postgres) | Specify how DECIMAL and NUMERIC columns
should be represented in change events, including:'precise' (the default) uses
java.math.BigDecimal to represent values, which are encoded in the change
events using a binary representation and Kafka Connect's
'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent
values; 'double' represents values using Java's 'double', which may not offer
the precision but will be far easier to use in [...]
| *eventProcessingFailureHandling Mode* (postgres) | Specify how failures
during processing of events (i.e. when encountering a corrupted event) should
be handled, including:'fail' (the default) an exception indicating the
problematic event and its position is raised, causing the connector to be
stopped; 'warn' the problematic event and its position will be logged and the
event will be skipped;'ignore' the problematic event will be skipped. | fail |
String
| *heartbeatActionQuery* (postgres) | The query executed with every heartbeat.
Defaults to an empty string. | | String
-| *heartbeatIntervalMs* (postgres) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (postgres) | Length of an interval in milli-seconds in
in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (postgres) | The prefix that is used to name
heartbeat topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat |
String
| *hstoreHandlingMode* (postgres) | Specify how HSTORE columns should be
represented in change events, including:'json' represents values as
string-ified JSON (default)'map' represents values as a key/value map | json |
String
| *includeUnknownDatatypes* (postgres) | Specify whether the fields of data
type not supported by Debezium should be processed:'false' (the default) omits
the fields; 'true' converts the field into an implementation dependent binary
representation. | false | boolean
@@ -193,7 +193,7 @@ with the following path and query parameters:
| *maxQueueSize* (postgres) | Maximum size of the queue for change events read
from the database log but not yet recorded or forwarded. Defaults to 8192, and
should always be larger than the maximum batch size. | 8192 | int
| *messageKeyColumns* (postgres) | A semicolon-separated list of expressions
that match fully-qualified tables and column(s) to be used as message key. Each
expression must match the pattern ':',where the table names could be defined as
(DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific
connector,and the key columns are a comma-separated list of columns
representing the custom key. For any table without an explicit key
configuration the table's primary key column [...]
| *pluginName* (postgres) | The name of the Postgres logical decoding plugin
installed on the server. Supported values are 'decoderbufs' and 'wal2json'.
Defaults to 'decoderbufs'. | decoderbufs | String
-| *pollIntervalMs* (postgres) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 0.5s |
long
+| *pollIntervalMs* (postgres) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 500ms |
long
| *provideTransactionMetadata* (postgres) | Enables transaction metadata
extraction together with event counting | false | boolean
| *publicationName* (postgres) | The name of the Postgres 10 publication used
for streaming changes from a plugin.Defaults to 'dbz_publication' |
dbz_publication | String
| *schemaBlacklist* (postgres) | The schemas for which events must not be
captured | | String
@@ -205,7 +205,7 @@ with the following path and query parameters:
| *slotRetryDelayMs* (postgres) | The number of milli-seconds to wait between
retry attempts when the connector fails to connect to a replication slot. | 10s
| long
| *slotStreamParams* (postgres) | Any optional parameters used by logical
decoding plugin. Semi-colon separated. E.g.
'add-tables=public.table,public.table2;include-lsn=true' | | String
| *snapshotCustomClass* (postgres) | When 'snapshot.mode' is set as custom,
this setting must be set to specify a fully qualified class name to load (via
the default class loader).This class must implement the 'Snapshotter' interface
and is called on each app boot to determine whether to do a snapshot and how to
build queries. | | String
-| *snapshotDelayMs* (postgres) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *snapshotDelayMs* (postgres) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (postgres) | The maximum number of records that should
be loaded into memory while performing a snapshot | | int
| *snapshotLockTimeoutMs* (postgres) | The maximum number of millis to wait
for table locks at the beginning of a snapshot. If locks cannot be acquired in
this time frame, the snapshot will be aborted. Defaults to 10 seconds | 10s |
long
| *snapshotMode* (postgres) | The criteria for running a snapshot upon startup
of the connector. Options include: 'always' to specify that the connector run a
snapshot each time it starts up; 'initial' (the default) to specify the
connector can run a snapshot only when no offsets are available for the logical
server name; 'initial_only' same as 'initial' except the connector should stop
after completing the snapshot and before it would normally start emitting
changes;'never' to specify t [...]
@@ -217,7 +217,7 @@ with the following path and query parameters:
| *timePrecisionMode* (postgres) | Time, date, and timestamps can be
represented with different kinds of precisions, including:'adaptive' (the
default) bases the precision of time, date, and timestamp values on the
database column's precision; 'adaptive_time_microseconds' like 'adaptive' mode,
but TIME fields always use microseconds precision;'connect' always represents
time, date, and timestamp values using Kafka Connect's built-in representations
for Time, Date, and Timestamp, which us [...]
| *toastedValuePlaceholder* (postgres) | Specify the constant that will be
provided by Debezium to indicate that the original value is a toasted value not
provided by the database.If starts with 'hex:' prefix it is expected that the
rest of the string repesents hexadecimally encoded octets. |
__debezium_unavailable_value | String
| *tombstonesOnDelete* (postgres) | Whether delete operations should be
represented by a delete event and a subsquenttombstone event (true) or only by
a delete event (false). Emitting the tombstone event (the default behavior)
allows Kafka to completely delete all events pertaining to the given key once
the source record got deleted. | false | boolean
-| *xminFetchIntervalMs* (postgres) | Specify how often (in ms) the xmin will
be fetched from the replication slot. This xmin value is exposed by the slot
which gives a lower bound of where a new replication slot could start from. The
lower the value, the more likely this value is to be the current 'true' value,
but the bigger the performance cost. The bigger the value, the less likely this
value is to be the current 'true' value, but the lower the performance penalty.
The default is set [...]
+| *xminFetchIntervalMs* (postgres) | Specify how often (in ms) the xmin will
be fetched from the replication slot. This xmin value is exposed by the slot
which gives a lower bound of where a new replication slot could start from. The
lower the value, the more likely this value is to be the current 'true' value,
but the bigger the performance cost. The bigger the value, the less likely this
value is to be the current 'true' value, but the lower the performance penalty.
The default is set [...]
|===
// endpoint options: END
diff --git
a/docs/components/modules/ROOT/pages/debezium-sqlserver-component.adoc
b/docs/components/modules/ROOT/pages/debezium-sqlserver-component.adoc
index 4ac6250..5c0fc2b 100644
--- a/docs/components/modules/ROOT/pages/debezium-sqlserver-component.adoc
+++ b/docs/components/modules/ROOT/pages/debezium-sqlserver-component.adoc
@@ -72,7 +72,7 @@ The Debezium SQL Server Connector component supports 48
options, which are liste
| *databaseHistoryFileFilename* (sqlserver) | The path to the file that will
be used to record the database history | | String
| *databaseHistoryKafkaBootstrap Servers* (sqlserver) | A list of host/port
pairs that the connector will use for establishing the initial connection to
the Kafka cluster for retrieving database schema history previously stored by
the connector. This should point to the same Kafka cluster used by the Kafka
Connect process. | | String
| *databaseHistoryKafkaRecovery Attempts* (sqlserver) | The number of attempts
in a row that no data are returned from Kafka before recover completes. The
maximum amount of time to wait after receiving no data is (recovery.attempts) x
(recovery.poll.interval.ms). | 100 | int
-| *databaseHistoryKafkaRecovery PollIntervalMs* (sqlserver) | The number of
milliseconds to wait while polling for persisted data during recovery. | 0.1s |
int
+| *databaseHistoryKafkaRecovery PollIntervalMs* (sqlserver) | The number of
milliseconds to wait while polling for persisted data during recovery. | 100ms
| int
| *databaseHistoryKafkaTopic* (sqlserver) | The name of the topic for the
database schema history | | String
| *databaseHostname* (sqlserver) | Resolvable hostname or IP address of the
SQL Server database server. | | String
| *databasePassword* (sqlserver) | *Required* Password of the SQL Server
database user to be used when connecting to the database. | | String
@@ -82,14 +82,14 @@ The Debezium SQL Server Connector component supports 48
options, which are liste
| *databaseUser* (sqlserver) | Name of the SQL Server database user to be used
when connecting to the database. | | String
| *decimalHandlingMode* (sqlserver) | Specify how DECIMAL and NUMERIC columns
should be represented in change events, including:'precise' (the default) uses
java.math.BigDecimal to represent values, which are encoded in the change
events using a binary representation and Kafka Connect's
'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent
values; 'double' represents values using Java's 'double', which may not offer
the precision but will be far easier to use in [...]
| *eventProcessingFailureHandling Mode* (sqlserver) | Specify how failures
during processing of events (i.e. when encountering a corrupted event) should
be handled, including:'fail' (the default) an exception indicating the
problematic event and its position is raised, causing the connector to be
stopped; 'warn' the problematic event and its position will be logged and the
event will be skipped;'ignore' the problematic event will be skipped. | fail |
String
-| *heartbeatIntervalMs* (sqlserver) | Length of an interval in milli-seconds
in in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (sqlserver) | Length of an interval in milli-seconds
in in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (sqlserver) | The prefix that is used to name
heartbeat topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat |
String
| *maxBatchSize* (sqlserver) | Maximum size of each batch of source records.
Defaults to 2048. | 2048 | int
| *maxQueueSize* (sqlserver) | Maximum size of the queue for change events
read from the database log but not yet recorded or forwarded. Defaults to 8192,
and should always be larger than the maximum batch size. | 8192 | int
| *messageKeyColumns* (sqlserver) | A semicolon-separated list of expressions
that match fully-qualified tables and column(s) to be used as message key. Each
expression must match the pattern ':',where the table names could be defined as
(DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific
connector,and the key columns are a comma-separated list of columns
representing the custom key. For any table without an explicit key
configuration the table's primary key colum [...]
-| *pollIntervalMs* (sqlserver) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 0.5s |
long
+| *pollIntervalMs* (sqlserver) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 500ms |
long
| *provideTransactionMetadata* (sqlserver) | Enables transaction metadata
extraction together with event counting | false | boolean
-| *snapshotDelayMs* (sqlserver) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *snapshotDelayMs* (sqlserver) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (sqlserver) | The maximum number of records that should
be loaded into memory while performing a snapshot | | int
| *snapshotLockTimeoutMs* (sqlserver) | The maximum number of millis to wait
for table locks at the beginning of a snapshot. If locks cannot be acquired in
this time frame, the snapshot will be aborted. Defaults to 10 seconds | 10s |
long
| *snapshotMode* (sqlserver) | The criteria for running a snapshot upon
startup of the connector. Options include: 'initial' (the default) to specify
the connector should run a snapshot only when no offsets are available for the
logical server name; 'schema_only' to specify the connector should run a
snapshot of the schema when no offsets are available for the logical server
name. | initial | String
@@ -151,7 +151,7 @@ with the following path and query parameters:
| *databaseHistoryFileFilename* (sqlserver) | The path to the file that will
be used to record the database history | | String
| *databaseHistoryKafkaBootstrap Servers* (sqlserver) | A list of host/port
pairs that the connector will use for establishing the initial connection to
the Kafka cluster for retrieving database schema history previously stored by
the connector. This should point to the same Kafka cluster used by the Kafka
Connect process. | | String
| *databaseHistoryKafkaRecovery Attempts* (sqlserver) | The number of attempts
in a row that no data are returned from Kafka before recover completes. The
maximum amount of time to wait after receiving no data is (recovery.attempts) x
(recovery.poll.interval.ms). | 100 | int
-| *databaseHistoryKafkaRecovery PollIntervalMs* (sqlserver) | The number of
milliseconds to wait while polling for persisted data during recovery. | 0.1s |
int
+| *databaseHistoryKafkaRecovery PollIntervalMs* (sqlserver) | The number of
milliseconds to wait while polling for persisted data during recovery. | 100ms
| int
| *databaseHistoryKafkaTopic* (sqlserver) | The name of the topic for the
database schema history | | String
| *databaseHostname* (sqlserver) | Resolvable hostname or IP address of the
SQL Server database server. | | String
| *databasePassword* (sqlserver) | *Required* Password of the SQL Server
database user to be used when connecting to the database. | | String
@@ -161,14 +161,14 @@ with the following path and query parameters:
| *databaseUser* (sqlserver) | Name of the SQL Server database user to be used
when connecting to the database. | | String
| *decimalHandlingMode* (sqlserver) | Specify how DECIMAL and NUMERIC columns
should be represented in change events, including:'precise' (the default) uses
java.math.BigDecimal to represent values, which are encoded in the change
events using a binary representation and Kafka Connect's
'org.apache.kafka.connect.data.Decimal' type; 'string' uses string to represent
values; 'double' represents values using Java's 'double', which may not offer
the precision but will be far easier to use in [...]
| *eventProcessingFailureHandling Mode* (sqlserver) | Specify how failures
during processing of events (i.e. when encountering a corrupted event) should
be handled, including:'fail' (the default) an exception indicating the
problematic event and its position is raised, causing the connector to be
stopped; 'warn' the problematic event and its position will be logged and the
event will be skipped;'ignore' the problematic event will be skipped. | fail |
String
-| *heartbeatIntervalMs* (sqlserver) | Length of an interval in milli-seconds
in in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0s | int
+| *heartbeatIntervalMs* (sqlserver) | Length of an interval in milli-seconds
in in which the connector periodically sends heartbeat messages to a heartbeat
topic. Use 0 to disable heartbeat messages. Disabled by default. | 0ms | int
| *heartbeatTopicsPrefix* (sqlserver) | The prefix that is used to name
heartbeat topics.Defaults to __debezium-heartbeat. | __debezium-heartbeat |
String
| *maxBatchSize* (sqlserver) | Maximum size of each batch of source records.
Defaults to 2048. | 2048 | int
| *maxQueueSize* (sqlserver) | Maximum size of the queue for change events
read from the database log but not yet recorded or forwarded. Defaults to 8192,
and should always be larger than the maximum batch size. | 8192 | int
| *messageKeyColumns* (sqlserver) | A semicolon-separated list of expressions
that match fully-qualified tables and column(s) to be used as message key. Each
expression must match the pattern ':',where the table names could be defined as
(DB_NAME.TABLE_NAME) or (SCHEMA_NAME.TABLE_NAME), depending on the specific
connector,and the key columns are a comma-separated list of columns
representing the custom key. For any table without an explicit key
configuration the table's primary key colum [...]
-| *pollIntervalMs* (sqlserver) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 0.5s |
long
+| *pollIntervalMs* (sqlserver) | Frequency in milliseconds to wait for new
change events to appear after receiving no events. Defaults to 500ms. | 500ms |
long
| *provideTransactionMetadata* (sqlserver) | Enables transaction metadata
extraction together with event counting | false | boolean
-| *snapshotDelayMs* (sqlserver) | The number of milliseconds to delay before a
snapshot will begin. | 0s | long
+| *snapshotDelayMs* (sqlserver) | The number of milliseconds to delay before a
snapshot will begin. | 0ms | long
| *snapshotFetchSize* (sqlserver) | The maximum number of records that should
be loaded into memory while performing a snapshot | | int
| *snapshotLockTimeoutMs* (sqlserver) | The maximum number of millis to wait
for table locks at the beginning of a snapshot. If locks cannot be acquired in
this time frame, the snapshot will be aborted. Defaults to 10 seconds | 10s |
long
| *snapshotMode* (sqlserver) | The criteria for running a snapshot upon
startup of the connector. Options include: 'initial' (the default) to specify
the connector should run a snapshot only when no offsets are available for the
logical server name; 'schema_only' to specify the connector should run a
snapshot of the schema when no offsets are available for the logical server
name. | initial | String
