This is an automated email from the ASF dual-hosted git repository.
davsclaus pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/camel.git
The following commit(s) were added to refs/heads/master by this push:
new f4ae2c1 Regen
f4ae2c1 is described below
commit f4ae2c13db1632d069dcbe7acddadb0240020323
Author: Claus Ibsen <[email protected]>
AuthorDate: Sat Jun 22 10:00:26 2019 +0200
Regen
---
.../src/main/docs/cm-sms-component.adoc | 6 +-
.../modules/ROOT/pages/cm-sms-component.adoc | 6 +-
.../META-INF/spring-configuration-metadata.json | 268 ++++++++++-----------
.../META-INF/spring-configuration-metadata.json | 268 ++++++++++-----------
4 files changed, 274 insertions(+), 274 deletions(-)
diff --git a/components/camel-cm-sms/src/main/docs/cm-sms-component.adoc
b/components/camel-cm-sms/src/main/docs/cm-sms-component.adoc
index d40ba67..4470bc5 100644
--- a/components/camel-cm-sms/src/main/docs/cm-sms-component.adoc
+++ b/components/camel-cm-sms/src/main/docs/cm-sms-component.adoc
@@ -71,10 +71,10 @@ with the following path and query parameters:
[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
-| *defaultFrom* (producer) | This is the sender name. The maximum length is 11
characters. | | String)
-| *defaultMaxNumberOfParts* (producer) | If it is a multipart message forces
the max number. Message can be truncated. Technically the gateway will first
check if a message is larger than 160 characters, if so, the message will be
cut into multiple 153 characters parts limited by these parameters. | 8 |
Max(8L)::Int)
+| *defaultFrom* (producer) | This is the sender name. The maximum length is 11
characters. | | String
+| *defaultMaxNumberOfParts* (producer) | If it is a multipart message forces
the max number. Message can be truncated. Technically the gateway will first
check if a message is larger than 160 characters, if so, the message will be
cut into multiple 153 characters parts limited by these parameters. | 8 |
Max(8L)Int
| *lazyStartProducer* (producer) | Whether the producer should be started lazy
(on the first message). By starting lazy you can use this to allow CamelContext
and routes to startup in situations where a producer may otherwise fail during
starting and cause the route to fail being started. By deferring this startup
to be lazy then the startup failure can be handled during routing messages via
Camel's routing error handlers. Beware that when the first message is processed
then creating and [...]
-| *productToken* (producer) | *Required* The unique token to use | | String)
+| *productToken* (producer) | *Required* The unique token to use | | String
| *testConnectionOnStartup* (producer) | Whether to test the connection to the
SMS Gateway on startup | false | boolean
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic
property binding (Camel 2.x) or the newer property binding with additional
capabilities | false | boolean
| *synchronous* (advanced) | Sets whether synchronous processing should be
strictly used, or Camel is allowed to use asynchronous processing (if
supported). | false | boolean
diff --git a/docs/components/modules/ROOT/pages/cm-sms-component.adoc
b/docs/components/modules/ROOT/pages/cm-sms-component.adoc
index d40ba67..4470bc5 100644
--- a/docs/components/modules/ROOT/pages/cm-sms-component.adoc
+++ b/docs/components/modules/ROOT/pages/cm-sms-component.adoc
@@ -71,10 +71,10 @@ with the following path and query parameters:
[width="100%",cols="2,5,^1,2",options="header"]
|===
| Name | Description | Default | Type
-| *defaultFrom* (producer) | This is the sender name. The maximum length is 11
characters. | | String)
-| *defaultMaxNumberOfParts* (producer) | If it is a multipart message forces
the max number. Message can be truncated. Technically the gateway will first
check if a message is larger than 160 characters, if so, the message will be
cut into multiple 153 characters parts limited by these parameters. | 8 |
Max(8L)::Int)
+| *defaultFrom* (producer) | This is the sender name. The maximum length is 11
characters. | | String
+| *defaultMaxNumberOfParts* (producer) | If it is a multipart message forces
the max number. Message can be truncated. Technically the gateway will first
check if a message is larger than 160 characters, if so, the message will be
cut into multiple 153 characters parts limited by these parameters. | 8 |
Max(8L)Int
| *lazyStartProducer* (producer) | Whether the producer should be started lazy
(on the first message). By starting lazy you can use this to allow CamelContext
and routes to startup in situations where a producer may otherwise fail during
starting and cause the route to fail being started. By deferring this startup
to be lazy then the startup failure can be handled during routing messages via
Camel's routing error handlers. Beware that when the first message is processed
then creating and [...]
-| *productToken* (producer) | *Required* The unique token to use | | String)
+| *productToken* (producer) | *Required* The unique token to use | | String
| *testConnectionOnStartup* (producer) | Whether to test the connection to the
SMS Gateway on startup | false | boolean
| *basicPropertyBinding* (advanced) | Whether the endpoint should use basic
property binding (Camel 2.x) or the newer property binding with additional
capabilities | false | boolean
| *synchronous* (advanced) | Sets whether synchronous processing should be
strictly used, or Camel is allowed to use asynchronous processing (if
supported). | false | boolean
diff --git
a/examples/camel-example-main-artemis/src/main/resources/META-INF/spring-configuration-metadata.json
b/examples/camel-example-main-artemis/src/main/resources/META-INF/spring-configuration-metadata.json
index c787468..500e343 100644
---
a/examples/camel-example-main-artemis/src/main/resources/META-INF/spring-configuration-metadata.json
+++
b/examples/camel-example-main-artemis/src/main/resources/META-INF/spring-configuration-metadata.json
@@ -1,295 +1,295 @@
{
"properties": [
{
- "name": "camel.main.allow-use-original-message",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether to allow access to the original message
from Camel's error handler, or from
org.apache.camel.spi.UnitOfWork.getOriginalInMessage(). Turning this off can
optimize performance, as defensive copy of the original message is not needed.
Default is false."
- },
- {
- "name": "camel.main.auto-configuration-enabled",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether auto configuration of
components/dataformats/languages is enabled or not. When enabled the
configuration parameters are loaded from the properties component and
optionally from the classpath file
META-INF/services/org/apache/camel/autowire.properties. You can prefix the
parameters in the properties file with: - camel.component.name.option1=value1 -
camel.component.name.option2=value2 - camel.dataformat.name.option1=value1 -
camel.dataformat.name.option2=valu [...]
- "defaultValue": true
- },
- {
- "name": "camel.main.auto-startup",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether the object should automatically start when
Camel starts. Important: Currently only routes can be disabled, as
CamelContext's are always started. Note: When setting auto startup false on
CamelContext then that takes precedence and no routes is started. You would
need to start CamelContext explicit using the
org.apache.camel.CamelContext.start() method, to start the context, and then
you would need to start the routes manually using CamelContext.getRouteC [...]
- "defaultValue": true
- },
- {
- "name": "camel.main.autowire-component-properties",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether autowiring components with properties that are
of same type, which has been added to the Camel registry, as a singleton
instance. This is used for convention over configuration to inject DataSource,
AmazonLogin instances to the components. <p/> This option is default enabled.",
- "defaultValue": true
- },
- {
- "name": "camel.main.autowire-component-properties-allow-private-setter",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether autowiring components allows to use private
setter method when setting the value. This may be needed in some rare
situations when some configuration classes may configure via constructors over
setters. But constructor configuration is more cumbersome to use via
.properties files etc.",
- "defaultValue": true
- },
- {
- "name": "camel.main.autowire-component-properties-deep",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether autowiring components (with deep nesting by
attempting to walk as deep down the object graph by creating new empty objects
on the way if needed) with properties that are of same type, which has been
added to the Camel registry, as a singleton instance. This is used for
convention over configuration to inject DataSource, AmazonLogin instances to
the components. <p/> This option is default disabled."
- },
- {
- "name": "camel.main.consumer-template-cache-size",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Consumer template endpoints cache size.",
- "defaultValue": 1000
- },
- {
- "name": "camel.main.duration",
- "type": "java.lang.Long",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Sets the duration (in seconds) to run the application
until it should be terminated. Defaults to -1. Any value <= 0 will run
forever.",
- "defaultValue": -1
- },
- {
- "name": "camel.main.duration-hit-exit-code",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Sets the exit code for the application if duration was
hit"
- },
- {
- "name": "camel.main.duration-max-idle-seconds",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "To specify for how long time in seconds Camel can be
idle before automatic terminating the JVM. You can use this to run Camel for a
short while."
- },
- {
- "name": "camel.main.duration-max-messages",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "To specify how many messages to process by Camel before
automatic terminating the JVM. You can use this to run Camel for a short while."
- },
- {
- "name": "camel.main.duration-max-seconds",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "To specify for how long time in seconds to keep running
the JVM before automatic terminating the JVM. You can use this to run Camel for
a short while."
- },
- {
- "name": "camel.main.endpoint-runtime-statistics-enabled",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether endpoint runtime statistics is enabled
(gathers runtime usage of each incoming and outgoing endpoints). The default
value is false."
- },
- {
- "name": "camel.main.file-configurations",
- "type": "java.lang.String",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Directory to load additional configuration files that
contains configuration values that takes precedence over any other
configuration. This can be used to refer to files that may have secret
configuration that has been mounted on the file system for containers. You can
specify a pattern to load from sub directories and a name pattern such as
/var/app/secret/*.properties, multiple directories can be separated by comma."
- },
- {
- "name": "camel.main.handle-fault",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether fault handling is enabled or not. Default
is false."
- },
- {
- "name": "camel.main.hangup-interceptor-enabled",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether to use graceful hangup when Camel is stopping or
when the JVM terminates.",
- "defaultValue": true
- },
- {
- "name":
"camel.main.hystrix.allow-maximum-size-to-diverge-from-core-size",
+ "name": "camel.hystrix.allow-maximum-size-to-diverge-from-core-size",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Allows the configuration for maximumSize to take effect.
That value can then be equal to, or higher, than coreSize"
},
{
- "name": "camel.main.hystrix.circuit-breaker-enabled",
+ "name": "camel.hystrix.circuit-breaker-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether to use a HystrixCircuitBreaker or not. If false
no circuit-breaker logic will be used and all requests permitted. <p> This is
similar in effect to circuitBreakerForceClosed() except that continues tracking
metrics and knowing whether it should be open/closed, this property results in
not even instantiating a circuit-breaker."
},
{
- "name": "camel.main.hystrix.circuit-breaker-error-threshold-percentage",
+ "name": "camel.hystrix.circuit-breaker-error-threshold-percentage",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Error percentage threshold (as whole number such as 50)
at which point the circuit breaker will trip open and reject requests. <p> It
will stay tripped for the duration defined in
circuitBreakerSleepWindowInMilliseconds; <p> The error percentage this is
compared against comes from HystrixCommandMetrics.getHealthCounts()."
},
{
- "name": "camel.main.hystrix.circuit-breaker-force-closed",
+ "name": "camel.hystrix.circuit-breaker-force-closed",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "If true the HystrixCircuitBreaker#allowRequest() will
always return true to allow requests regardless of the error percentage from
HystrixCommandMetrics.getHealthCounts(). <p> The circuitBreakerForceOpen()
property takes precedence so if it set to true this property does nothing."
},
{
- "name": "camel.main.hystrix.circuit-breaker-force-open",
+ "name": "camel.hystrix.circuit-breaker-force-open",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "If true the HystrixCircuitBreaker.allowRequest() will
always return false, causing the circuit to be open (tripped) and reject all
requests. <p> This property takes precedence over circuitBreakerForceClosed();"
},
{
- "name": "camel.main.hystrix.circuit-breaker-request-volume-threshold",
+ "name": "camel.hystrix.circuit-breaker-request-volume-threshold",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Minimum number of requests in the
metricsRollingStatisticalWindowInMilliseconds() that must exist before the
HystrixCircuitBreaker will trip. <p> If below this number the circuit will not
trip regardless of error percentage."
},
{
- "name":
"camel.main.hystrix.circuit-breaker-sleep-window-in-milliseconds",
+ "name": "camel.hystrix.circuit-breaker-sleep-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "The time in milliseconds after a HystrixCircuitBreaker
trips open that it should wait before trying requests again."
},
{
- "name": "camel.main.hystrix.core-pool-size",
+ "name": "camel.hystrix.core-pool-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Core thread-pool size that gets passed to {@link
java.util.concurrent.ThreadPoolExecutor#setCorePoolSize(int)}"
},
{
- "name":
"camel.main.hystrix.execution-isolation-semaphore-max-concurrent-requests",
+ "name":
"camel.hystrix.execution-isolation-semaphore-max-concurrent-requests",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of concurrent requests permitted to
HystrixCommand.run(). Requests beyond the concurrent limit will be rejected.
<p> Applicable only when executionIsolationStrategy == SEMAPHORE."
},
{
- "name": "camel.main.hystrix.execution-isolation-strategy",
+ "name": "camel.hystrix.execution-isolation-strategy",
"type": "java.lang.String",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "What isolation strategy HystrixCommand.run() will be
executed with. <p> If THREAD then it will be executed on a separate thread and
concurrent requests limited by the number of threads in the thread-pool. <p> If
SEMAPHORE then it will be executed on the calling thread and concurrent
requests limited by the semaphore count."
},
{
- "name":
"camel.main.hystrix.execution-isolation-thread-interrupt-on-timeout",
+ "name": "camel.hystrix.execution-isolation-thread-interrupt-on-timeout",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether the execution thread should attempt an interrupt
(using {@link Future#cancel} ) when a thread times out. <p> Applicable only
when executionIsolationStrategy() == THREAD."
},
{
- "name": "camel.main.hystrix.execution-timeout-enabled",
+ "name": "camel.hystrix.execution-timeout-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether the timeout mechanism is enabled for this
command"
},
{
- "name": "camel.main.hystrix.execution-timeout-in-milliseconds",
+ "name": "camel.hystrix.execution-timeout-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Time in milliseconds at which point the command will
timeout and halt execution. <p> If {@link
#executionIsolationThreadInterruptOnTimeout} == true and the command is
thread-isolated, the executing thread will be interrupted. If the command is
semaphore-isolated and a HystrixObservableCommand, that command will get
unsubscribed."
},
{
- "name": "camel.main.hystrix.fallback-enabled",
+ "name": "camel.hystrix.fallback-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether HystrixCommand.getFallback() should be attempted
when failure occurs."
},
{
- "name":
"camel.main.hystrix.fallback-isolation-semaphore-max-concurrent-requests",
+ "name":
"camel.hystrix.fallback-isolation-semaphore-max-concurrent-requests",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of concurrent requests permitted to
HystrixCommand.getFallback(). Requests beyond the concurrent limit will
fail-fast and not attempt retrieving a fallback."
},
{
- "name": "camel.main.hystrix.group-key",
+ "name": "camel.hystrix.group-key",
"type": "java.lang.String",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Sets the group key to use. The default value is
CamelHystrix."
},
{
- "name": "camel.main.hystrix.keep-alive-time",
+ "name": "camel.hystrix.keep-alive-time",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Keep-alive time in minutes that gets passed to {@link
ThreadPoolExecutor#setKeepAliveTime(long,TimeUnit)}"
},
{
- "name": "camel.main.hystrix.maximum-size",
+ "name": "camel.hystrix.maximum-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Maximum thread-pool size that gets passed to {@link
ThreadPoolExecutor#setMaximumPoolSize(int)} . This is the maximum amount of
concurrency that can be supported without starting to reject HystrixCommands.
Please note that this setting only takes effect if you also set
allowMaximumSizeToDivergeFromCoreSize"
},
{
- "name": "camel.main.hystrix.max-queue-size",
+ "name": "camel.hystrix.max-queue-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Max queue size that gets passed to {@link
BlockingQueue} in HystrixConcurrencyStrategy.getBlockingQueue(int) This should
only affect the instantiation of a threadpool - it is not eliglible to change a
queue size on the fly. For that, use queueSizeRejectionThreshold()."
},
{
- "name":
"camel.main.hystrix.metrics-health-snapshot-interval-in-milliseconds",
+ "name": "camel.hystrix.metrics-health-snapshot-interval-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Time in milliseconds to wait between allowing health
snapshots to be taken that calculate success and error percentages and affect
HystrixCircuitBreaker.isOpen() status. <p> On high-volume circuits the
continual calculation of error percentage can become CPU intensive thus this
controls how often it is calculated."
},
{
- "name": "camel.main.hystrix.metrics-rolling-percentile-bucket-size",
+ "name": "camel.hystrix.metrics-rolling-percentile-bucket-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Maximum number of values stored in each bucket of the
rolling percentile. This is passed into HystrixRollingPercentile inside
HystrixCommandMetrics."
},
{
- "name": "camel.main.hystrix.metrics-rolling-percentile-enabled",
+ "name": "camel.hystrix.metrics-rolling-percentile-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether percentile metrics should be captured using
HystrixRollingPercentile inside HystrixCommandMetrics."
},
{
- "name": "camel.main.hystrix.metrics-rolling-percentile-window-buckets",
+ "name": "camel.hystrix.metrics-rolling-percentile-window-buckets",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of buckets the rolling percentile window is
broken into. This is passed into HystrixRollingPercentile inside
HystrixCommandMetrics."
},
{
- "name":
"camel.main.hystrix.metrics-rolling-percentile-window-in-milliseconds",
+ "name":
"camel.hystrix.metrics-rolling-percentile-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Duration of percentile rolling window in milliseconds.
This is passed into HystrixRollingPercentile inside HystrixCommandMetrics."
},
{
- "name": "camel.main.hystrix.metrics-rolling-statistical-window-buckets",
+ "name": "camel.hystrix.metrics-rolling-statistical-window-buckets",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of buckets the rolling statistical window is
broken into. This is passed into HystrixRollingNumber inside
HystrixCommandMetrics."
},
{
- "name":
"camel.main.hystrix.metrics-rolling-statistical-window-in-milliseconds",
+ "name":
"camel.hystrix.metrics-rolling-statistical-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "This property sets the duration of the statistical
rolling window, in milliseconds. This is how long metrics are kept for the
thread pool. The window is divided into buckets and “rolls” by those
increments."
},
{
- "name": "camel.main.hystrix.queue-size-rejection-threshold",
+ "name": "camel.hystrix.queue-size-rejection-threshold",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Queue size rejection threshold is an artificial max size
at which rejections will occur even if {@link #maxQueueSize} has not been
reached. This is done because the {@link #maxQueueSize} of a {@link
BlockingQueue} can not be dynamically changed and we want to support
dynamically changing the queue size that affects rejections. <p> This is used
by HystrixCommand when queuing a thread for execution."
},
{
- "name": "camel.main.hystrix.request-log-enabled",
+ "name": "camel.hystrix.request-log-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether HystrixCommand execution and events should be
logged to HystrixRequestLog."
},
{
- "name": "camel.main.hystrix.thread-pool-key",
+ "name": "camel.hystrix.thread-pool-key",
"type": "java.lang.String",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Sets the thread pool key to use. Will by default use the
same value as groupKey has been configured to use."
},
{
- "name":
"camel.main.hystrix.thread-pool-rolling-number-statistical-window-buckets",
+ "name":
"camel.hystrix.thread-pool-rolling-number-statistical-window-buckets",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of buckets the rolling statistical window is
broken into. This is passed into HystrixRollingNumber inside each
HystrixThreadPoolMetrics instance."
},
{
- "name":
"camel.main.hystrix.thread-pool-rolling-number-statistical-window-in-milliseconds",
+ "name":
"camel.hystrix.thread-pool-rolling-number-statistical-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Duration of statistical rolling window in milliseconds.
This is passed into HystrixRollingNumber inside each HystrixThreadPoolMetrics
instance."
},
{
+ "name": "camel.main.allow-use-original-message",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether to allow access to the original message
from Camel's error handler, or from
org.apache.camel.spi.UnitOfWork.getOriginalInMessage(). Turning this off can
optimize performance, as defensive copy of the original message is not needed.
Default is false."
+ },
+ {
+ "name": "camel.main.auto-configuration-enabled",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether auto configuration of
components/dataformats/languages is enabled or not. When enabled the
configuration parameters are loaded from the properties component and
optionally from the classpath file
META-INF/services/org/apache/camel/autowire.properties. You can prefix the
parameters in the properties file with: - camel.component.name.option1=value1 -
camel.component.name.option2=value2 - camel.dataformat.name.option1=value1 -
camel.dataformat.name.option2=valu [...]
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.auto-startup",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether the object should automatically start when
Camel starts. Important: Currently only routes can be disabled, as
CamelContext's are always started. Note: When setting auto startup false on
CamelContext then that takes precedence and no routes is started. You would
need to start CamelContext explicit using the
org.apache.camel.CamelContext.start() method, to start the context, and then
you would need to start the routes manually using CamelContext.getRouteC [...]
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.autowire-component-properties",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether autowiring components with properties that are
of same type, which has been added to the Camel registry, as a singleton
instance. This is used for convention over configuration to inject DataSource,
AmazonLogin instances to the components. <p/> This option is default enabled.",
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.autowire-component-properties-allow-private-setter",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether autowiring components allows to use private
setter method when setting the value. This may be needed in some rare
situations when some configuration classes may configure via constructors over
setters. But constructor configuration is more cumbersome to use via
.properties files etc.",
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.autowire-component-properties-deep",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether autowiring components (with deep nesting by
attempting to walk as deep down the object graph by creating new empty objects
on the way if needed) with properties that are of same type, which has been
added to the Camel registry, as a singleton instance. This is used for
convention over configuration to inject DataSource, AmazonLogin instances to
the components. <p/> This option is default disabled."
+ },
+ {
+ "name": "camel.main.consumer-template-cache-size",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Consumer template endpoints cache size.",
+ "defaultValue": 1000
+ },
+ {
+ "name": "camel.main.duration",
+ "type": "java.lang.Long",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Sets the duration (in seconds) to run the application
until it should be terminated. Defaults to -1. Any value <= 0 will run
forever.",
+ "defaultValue": -1
+ },
+ {
+ "name": "camel.main.duration-hit-exit-code",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Sets the exit code for the application if duration was
hit"
+ },
+ {
+ "name": "camel.main.duration-max-idle-seconds",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "To specify for how long time in seconds Camel can be
idle before automatic terminating the JVM. You can use this to run Camel for a
short while."
+ },
+ {
+ "name": "camel.main.duration-max-messages",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "To specify how many messages to process by Camel before
automatic terminating the JVM. You can use this to run Camel for a short while."
+ },
+ {
+ "name": "camel.main.duration-max-seconds",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "To specify for how long time in seconds to keep running
the JVM before automatic terminating the JVM. You can use this to run Camel for
a short while."
+ },
+ {
+ "name": "camel.main.endpoint-runtime-statistics-enabled",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether endpoint runtime statistics is enabled
(gathers runtime usage of each incoming and outgoing endpoints). The default
value is false."
+ },
+ {
+ "name": "camel.main.file-configurations",
+ "type": "java.lang.String",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Directory to load additional configuration files that
contains configuration values that takes precedence over any other
configuration. This can be used to refer to files that may have secret
configuration that has been mounted on the file system for containers. You can
specify a pattern to load from sub directories and a name pattern such as
/var/app/secret/*.properties, multiple directories can be separated by comma."
+ },
+ {
+ "name": "camel.main.handle-fault",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether fault handling is enabled or not. Default
is false."
+ },
+ {
+ "name": "camel.main.hangup-interceptor-enabled",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether to use graceful hangup when Camel is stopping or
when the JVM terminates.",
+ "defaultValue": true
+ },
+ {
"name": "camel.main.jmx-create-connector",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
diff --git
a/examples/camel-example-main/src/main/resources/META-INF/spring-configuration-metadata.json
b/examples/camel-example-main/src/main/resources/META-INF/spring-configuration-metadata.json
index 60787c4..a94ec70 100644
---
a/examples/camel-example-main/src/main/resources/META-INF/spring-configuration-metadata.json
+++
b/examples/camel-example-main/src/main/resources/META-INF/spring-configuration-metadata.json
@@ -1,295 +1,295 @@
{
"properties": [
{
- "name": "camel.main.allow-use-original-message",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether to allow access to the original message
from Camel's error handler, or from
org.apache.camel.spi.UnitOfWork.getOriginalInMessage(). Turning this off can
optimize performance, as defensive copy of the original message is not needed.
Default is false."
- },
- {
- "name": "camel.main.auto-configuration-enabled",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether auto configuration of
components/dataformats/languages is enabled or not. When enabled the
configuration parameters are loaded from the properties component and
optionally from the classpath file
META-INF/services/org/apache/camel/autowire.properties. You can prefix the
parameters in the properties file with: - camel.component.name.option1=value1 -
camel.component.name.option2=value2 - camel.dataformat.name.option1=value1 -
camel.dataformat.name.option2=valu [...]
- "defaultValue": true
- },
- {
- "name": "camel.main.auto-startup",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether the object should automatically start when
Camel starts. Important: Currently only routes can be disabled, as
CamelContext's are always started. Note: When setting auto startup false on
CamelContext then that takes precedence and no routes is started. You would
need to start CamelContext explicit using the
org.apache.camel.CamelContext.start() method, to start the context, and then
you would need to start the routes manually using CamelContext.getRouteC [...]
- "defaultValue": true
- },
- {
- "name": "camel.main.autowire-component-properties",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether autowiring components with properties that are
of same type, which has been added to the Camel registry, as a singleton
instance. This is used for convention over configuration to inject DataSource,
AmazonLogin instances to the components. <p/> This option is default enabled.",
- "defaultValue": true
- },
- {
- "name": "camel.main.autowire-component-properties-allow-private-setter",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether autowiring components allows to use private
setter method when setting the value. This may be needed in some rare
situations when some configuration classes may configure via constructors over
setters. But constructor configuration is more cumbersome to use via
.properties files etc.",
- "defaultValue": true
- },
- {
- "name": "camel.main.autowire-component-properties-deep",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether autowiring components (with deep nesting by
attempting to walk as deep down the object graph by creating new empty objects
on the way if needed) with properties that are of same type, which has been
added to the Camel registry, as a singleton instance. This is used for
convention over configuration to inject DataSource, AmazonLogin instances to
the components. <p/> This option is default disabled."
- },
- {
- "name": "camel.main.consumer-template-cache-size",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Consumer template endpoints cache size.",
- "defaultValue": 1000
- },
- {
- "name": "camel.main.duration",
- "type": "java.lang.Long",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Sets the duration (in seconds) to run the application
until it should be terminated. Defaults to -1. Any value <= 0 will run
forever.",
- "defaultValue": -1
- },
- {
- "name": "camel.main.duration-hit-exit-code",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Sets the exit code for the application if duration was
hit"
- },
- {
- "name": "camel.main.duration-max-idle-seconds",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "To specify for how long time in seconds Camel can be
idle before automatic terminating the JVM. You can use this to run Camel for a
short while."
- },
- {
- "name": "camel.main.duration-max-messages",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "To specify how many messages to process by Camel before
automatic terminating the JVM. You can use this to run Camel for a short while."
- },
- {
- "name": "camel.main.duration-max-seconds",
- "type": "java.lang.Integer",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "To specify for how long time in seconds to keep running
the JVM before automatic terminating the JVM. You can use this to run Camel for
a short while."
- },
- {
- "name": "camel.main.endpoint-runtime-statistics-enabled",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether endpoint runtime statistics is enabled
(gathers runtime usage of each incoming and outgoing endpoints). The default
value is false."
- },
- {
- "name": "camel.main.file-configurations",
- "type": "java.lang.String",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Directory to load additional configuration files that
contains configuration values that takes precedence over any other
configuration. This can be used to refer to files that may have secret
configuration that has been mounted on the file system for containers. You can
specify a pattern to load from sub directories and a name pattern such as
/var/app/secret/*.properties, multiple directories can be separated by comma."
- },
- {
- "name": "camel.main.handle-fault",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
- "description": "Sets whether fault handling is enabled or not. Default
is false."
- },
- {
- "name": "camel.main.hangup-interceptor-enabled",
- "type": "java.lang.Boolean",
- "sourceType": "org.apache.camel.main.MainConfigurationProperties",
- "description": "Whether to use graceful hangup when Camel is stopping or
when the JVM terminates.",
- "defaultValue": true
- },
- {
- "name":
"camel.main.hystrix.allow-maximum-size-to-diverge-from-core-size",
+ "name": "camel.hystrix.allow-maximum-size-to-diverge-from-core-size",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Allows the configuration for maximumSize to take effect.
That value can then be equal to, or higher, than coreSize"
},
{
- "name": "camel.main.hystrix.circuit-breaker-enabled",
+ "name": "camel.hystrix.circuit-breaker-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether to use a HystrixCircuitBreaker or not. If false
no circuit-breaker logic will be used and all requests permitted. <p> This is
similar in effect to circuitBreakerForceClosed() except that continues tracking
metrics and knowing whether it should be open/closed, this property results in
not even instantiating a circuit-breaker."
},
{
- "name": "camel.main.hystrix.circuit-breaker-error-threshold-percentage",
+ "name": "camel.hystrix.circuit-breaker-error-threshold-percentage",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Error percentage threshold (as whole number such as 50)
at which point the circuit breaker will trip open and reject requests. <p> It
will stay tripped for the duration defined in
circuitBreakerSleepWindowInMilliseconds; <p> The error percentage this is
compared against comes from HystrixCommandMetrics.getHealthCounts()."
},
{
- "name": "camel.main.hystrix.circuit-breaker-force-closed",
+ "name": "camel.hystrix.circuit-breaker-force-closed",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "If true the HystrixCircuitBreaker#allowRequest() will
always return true to allow requests regardless of the error percentage from
HystrixCommandMetrics.getHealthCounts(). <p> The circuitBreakerForceOpen()
property takes precedence so if it set to true this property does nothing."
},
{
- "name": "camel.main.hystrix.circuit-breaker-force-open",
+ "name": "camel.hystrix.circuit-breaker-force-open",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "If true the HystrixCircuitBreaker.allowRequest() will
always return false, causing the circuit to be open (tripped) and reject all
requests. <p> This property takes precedence over circuitBreakerForceClosed();"
},
{
- "name": "camel.main.hystrix.circuit-breaker-request-volume-threshold",
+ "name": "camel.hystrix.circuit-breaker-request-volume-threshold",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Minimum number of requests in the
metricsRollingStatisticalWindowInMilliseconds() that must exist before the
HystrixCircuitBreaker will trip. <p> If below this number the circuit will not
trip regardless of error percentage."
},
{
- "name":
"camel.main.hystrix.circuit-breaker-sleep-window-in-milliseconds",
+ "name": "camel.hystrix.circuit-breaker-sleep-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "The time in milliseconds after a HystrixCircuitBreaker
trips open that it should wait before trying requests again."
},
{
- "name": "camel.main.hystrix.core-pool-size",
+ "name": "camel.hystrix.core-pool-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Core thread-pool size that gets passed to {@link
java.util.concurrent.ThreadPoolExecutor#setCorePoolSize(int)}"
},
{
- "name":
"camel.main.hystrix.execution-isolation-semaphore-max-concurrent-requests",
+ "name":
"camel.hystrix.execution-isolation-semaphore-max-concurrent-requests",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of concurrent requests permitted to
HystrixCommand.run(). Requests beyond the concurrent limit will be rejected.
<p> Applicable only when executionIsolationStrategy == SEMAPHORE."
},
{
- "name": "camel.main.hystrix.execution-isolation-strategy",
+ "name": "camel.hystrix.execution-isolation-strategy",
"type": "java.lang.String",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "What isolation strategy HystrixCommand.run() will be
executed with. <p> If THREAD then it will be executed on a separate thread and
concurrent requests limited by the number of threads in the thread-pool. <p> If
SEMAPHORE then it will be executed on the calling thread and concurrent
requests limited by the semaphore count."
},
{
- "name":
"camel.main.hystrix.execution-isolation-thread-interrupt-on-timeout",
+ "name": "camel.hystrix.execution-isolation-thread-interrupt-on-timeout",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether the execution thread should attempt an interrupt
(using {@link Future#cancel} ) when a thread times out. <p> Applicable only
when executionIsolationStrategy() == THREAD."
},
{
- "name": "camel.main.hystrix.execution-timeout-enabled",
+ "name": "camel.hystrix.execution-timeout-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether the timeout mechanism is enabled for this
command"
},
{
- "name": "camel.main.hystrix.execution-timeout-in-milliseconds",
+ "name": "camel.hystrix.execution-timeout-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Time in milliseconds at which point the command will
timeout and halt execution. <p> If {@link
#executionIsolationThreadInterruptOnTimeout} == true and the command is
thread-isolated, the executing thread will be interrupted. If the command is
semaphore-isolated and a HystrixObservableCommand, that command will get
unsubscribed."
},
{
- "name": "camel.main.hystrix.fallback-enabled",
+ "name": "camel.hystrix.fallback-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether HystrixCommand.getFallback() should be attempted
when failure occurs."
},
{
- "name":
"camel.main.hystrix.fallback-isolation-semaphore-max-concurrent-requests",
+ "name":
"camel.hystrix.fallback-isolation-semaphore-max-concurrent-requests",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of concurrent requests permitted to
HystrixCommand.getFallback(). Requests beyond the concurrent limit will
fail-fast and not attempt retrieving a fallback."
},
{
- "name": "camel.main.hystrix.group-key",
+ "name": "camel.hystrix.group-key",
"type": "java.lang.String",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Sets the group key to use. The default value is
CamelHystrix."
},
{
- "name": "camel.main.hystrix.keep-alive-time",
+ "name": "camel.hystrix.keep-alive-time",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Keep-alive time in minutes that gets passed to {@link
ThreadPoolExecutor#setKeepAliveTime(long,TimeUnit)}"
},
{
- "name": "camel.main.hystrix.maximum-size",
+ "name": "camel.hystrix.maximum-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Maximum thread-pool size that gets passed to {@link
ThreadPoolExecutor#setMaximumPoolSize(int)} . This is the maximum amount of
concurrency that can be supported without starting to reject HystrixCommands.
Please note that this setting only takes effect if you also set
allowMaximumSizeToDivergeFromCoreSize"
},
{
- "name": "camel.main.hystrix.max-queue-size",
+ "name": "camel.hystrix.max-queue-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Max queue size that gets passed to {@link
BlockingQueue} in HystrixConcurrencyStrategy.getBlockingQueue(int) This should
only affect the instantiation of a threadpool - it is not eliglible to change a
queue size on the fly. For that, use queueSizeRejectionThreshold()."
},
{
- "name":
"camel.main.hystrix.metrics-health-snapshot-interval-in-milliseconds",
+ "name": "camel.hystrix.metrics-health-snapshot-interval-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Time in milliseconds to wait between allowing health
snapshots to be taken that calculate success and error percentages and affect
HystrixCircuitBreaker.isOpen() status. <p> On high-volume circuits the
continual calculation of error percentage can become CPU intensive thus this
controls how often it is calculated."
},
{
- "name": "camel.main.hystrix.metrics-rolling-percentile-bucket-size",
+ "name": "camel.hystrix.metrics-rolling-percentile-bucket-size",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Maximum number of values stored in each bucket of the
rolling percentile. This is passed into HystrixRollingPercentile inside
HystrixCommandMetrics."
},
{
- "name": "camel.main.hystrix.metrics-rolling-percentile-enabled",
+ "name": "camel.hystrix.metrics-rolling-percentile-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether percentile metrics should be captured using
HystrixRollingPercentile inside HystrixCommandMetrics."
},
{
- "name": "camel.main.hystrix.metrics-rolling-percentile-window-buckets",
+ "name": "camel.hystrix.metrics-rolling-percentile-window-buckets",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of buckets the rolling percentile window is
broken into. This is passed into HystrixRollingPercentile inside
HystrixCommandMetrics."
},
{
- "name":
"camel.main.hystrix.metrics-rolling-percentile-window-in-milliseconds",
+ "name":
"camel.hystrix.metrics-rolling-percentile-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Duration of percentile rolling window in milliseconds.
This is passed into HystrixRollingPercentile inside HystrixCommandMetrics."
},
{
- "name": "camel.main.hystrix.metrics-rolling-statistical-window-buckets",
+ "name": "camel.hystrix.metrics-rolling-statistical-window-buckets",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of buckets the rolling statistical window is
broken into. This is passed into HystrixRollingNumber inside
HystrixCommandMetrics."
},
{
- "name":
"camel.main.hystrix.metrics-rolling-statistical-window-in-milliseconds",
+ "name":
"camel.hystrix.metrics-rolling-statistical-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "This property sets the duration of the statistical
rolling window, in milliseconds. This is how long metrics are kept for the
thread pool. The window is divided into buckets and “rolls” by those
increments."
},
{
- "name": "camel.main.hystrix.queue-size-rejection-threshold",
+ "name": "camel.hystrix.queue-size-rejection-threshold",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Queue size rejection threshold is an artificial max size
at which rejections will occur even if {@link #maxQueueSize} has not been
reached. This is done because the {@link #maxQueueSize} of a {@link
BlockingQueue} can not be dynamically changed and we want to support
dynamically changing the queue size that affects rejections. <p> This is used
by HystrixCommand when queuing a thread for execution."
},
{
- "name": "camel.main.hystrix.request-log-enabled",
+ "name": "camel.hystrix.request-log-enabled",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Whether HystrixCommand execution and events should be
logged to HystrixRequestLog."
},
{
- "name": "camel.main.hystrix.thread-pool-key",
+ "name": "camel.hystrix.thread-pool-key",
"type": "java.lang.String",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Sets the thread pool key to use. Will by default use the
same value as groupKey has been configured to use."
},
{
- "name":
"camel.main.hystrix.thread-pool-rolling-number-statistical-window-buckets",
+ "name":
"camel.hystrix.thread-pool-rolling-number-statistical-window-buckets",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Number of buckets the rolling statistical window is
broken into. This is passed into HystrixRollingNumber inside each
HystrixThreadPoolMetrics instance."
},
{
- "name":
"camel.main.hystrix.thread-pool-rolling-number-statistical-window-in-milliseconds",
+ "name":
"camel.hystrix.thread-pool-rolling-number-statistical-window-in-milliseconds",
"type": "java.lang.Integer",
"sourceType": "org.apache.camel.main.HystrixConfigurationProperties",
"description": "Duration of statistical rolling window in milliseconds.
This is passed into HystrixRollingNumber inside each HystrixThreadPoolMetrics
instance."
},
{
+ "name": "camel.main.allow-use-original-message",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether to allow access to the original message
from Camel's error handler, or from
org.apache.camel.spi.UnitOfWork.getOriginalInMessage(). Turning this off can
optimize performance, as defensive copy of the original message is not needed.
Default is false."
+ },
+ {
+ "name": "camel.main.auto-configuration-enabled",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether auto configuration of
components/dataformats/languages is enabled or not. When enabled the
configuration parameters are loaded from the properties component and
optionally from the classpath file
META-INF/services/org/apache/camel/autowire.properties. You can prefix the
parameters in the properties file with: - camel.component.name.option1=value1 -
camel.component.name.option2=value2 - camel.dataformat.name.option1=value1 -
camel.dataformat.name.option2=valu [...]
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.auto-startup",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether the object should automatically start when
Camel starts. Important: Currently only routes can be disabled, as
CamelContext's are always started. Note: When setting auto startup false on
CamelContext then that takes precedence and no routes is started. You would
need to start CamelContext explicit using the
org.apache.camel.CamelContext.start() method, to start the context, and then
you would need to start the routes manually using CamelContext.getRouteC [...]
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.autowire-component-properties",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether autowiring components with properties that are
of same type, which has been added to the Camel registry, as a singleton
instance. This is used for convention over configuration to inject DataSource,
AmazonLogin instances to the components. <p/> This option is default enabled.",
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.autowire-component-properties-allow-private-setter",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether autowiring components allows to use private
setter method when setting the value. This may be needed in some rare
situations when some configuration classes may configure via constructors over
setters. But constructor configuration is more cumbersome to use via
.properties files etc.",
+ "defaultValue": true
+ },
+ {
+ "name": "camel.main.autowire-component-properties-deep",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether autowiring components (with deep nesting by
attempting to walk as deep down the object graph by creating new empty objects
on the way if needed) with properties that are of same type, which has been
added to the Camel registry, as a singleton instance. This is used for
convention over configuration to inject DataSource, AmazonLogin instances to
the components. <p/> This option is default disabled."
+ },
+ {
+ "name": "camel.main.consumer-template-cache-size",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Consumer template endpoints cache size.",
+ "defaultValue": 1000
+ },
+ {
+ "name": "camel.main.duration",
+ "type": "java.lang.Long",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Sets the duration (in seconds) to run the application
until it should be terminated. Defaults to -1. Any value <= 0 will run
forever.",
+ "defaultValue": -1
+ },
+ {
+ "name": "camel.main.duration-hit-exit-code",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Sets the exit code for the application if duration was
hit"
+ },
+ {
+ "name": "camel.main.duration-max-idle-seconds",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "To specify for how long time in seconds Camel can be
idle before automatic terminating the JVM. You can use this to run Camel for a
short while."
+ },
+ {
+ "name": "camel.main.duration-max-messages",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "To specify how many messages to process by Camel before
automatic terminating the JVM. You can use this to run Camel for a short while."
+ },
+ {
+ "name": "camel.main.duration-max-seconds",
+ "type": "java.lang.Integer",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "To specify for how long time in seconds to keep running
the JVM before automatic terminating the JVM. You can use this to run Camel for
a short while."
+ },
+ {
+ "name": "camel.main.endpoint-runtime-statistics-enabled",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether endpoint runtime statistics is enabled
(gathers runtime usage of each incoming and outgoing endpoints). The default
value is false."
+ },
+ {
+ "name": "camel.main.file-configurations",
+ "type": "java.lang.String",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Directory to load additional configuration files that
contains configuration values that takes precedence over any other
configuration. This can be used to refer to files that may have secret
configuration that has been mounted on the file system for containers. You can
specify a pattern to load from sub directories and a name pattern such as
/var/app/secret/*.properties, multiple directories can be separated by comma."
+ },
+ {
+ "name": "camel.main.handle-fault",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
+ "description": "Sets whether fault handling is enabled or not. Default
is false."
+ },
+ {
+ "name": "camel.main.hangup-interceptor-enabled",
+ "type": "java.lang.Boolean",
+ "sourceType": "org.apache.camel.main.MainConfigurationProperties",
+ "description": "Whether to use graceful hangup when Camel is stopping or
when the JVM terminates.",
+ "defaultValue": true
+ },
+ {
"name": "camel.main.jmx-create-connector",
"type": "java.lang.Boolean",
"sourceType": "org.apache.camel.main.DefaultConfigurationProperties",
