This is an automated email from the ASF dual-hosted git repository.
davsclaus pushed a commit to branch main
in repository https://gitbox.apache.org/repos/asf/camel-spring-boot.git
The following commit(s) were added to refs/heads/main by this push:
new e2c7870 Regen
e2c7870 is described below
commit e2c7870372578b205354a4d68446f2934dfb0c3c
Author: Claus Ibsen <[email protected]>
AuthorDate: Wed Jun 9 07:10:40 2021 +0200
Regen
---
.../springboot/catalog/components/activemq.json | 4 +-
.../camel/springboot/catalog/components/amqp.json | 4 +-
.../camel/springboot/catalog/components/jms.json | 4 +-
.../src/main/docs/activemq-starter.adoc | 2 +-
.../springboot/ActiveMQComponentConfiguration.java | 4 +-
.../src/main/docs/amqp-starter.adoc | 2 +-
.../springboot/AMQPComponentConfiguration.java | 4 +-
.../src/main/docs/jms-starter.adoc | 2 +-
.../jms/springboot/JmsComponentConfiguration.java | 4 +-
docs/modules/ROOT/pages/activemq-starter.adoc | 2 +-
docs/modules/ROOT/pages/amqp-starter.adoc | 2 +-
docs/modules/ROOT/pages/jms-starter.adoc | 2 +-
tooling/camel-spring-boot-dependencies/pom.xml | 56 +++++++++++-----------
13 files changed, 46 insertions(+), 46 deletions(-)
diff --git
a/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/activemq.json
b/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/activemq.json
index b6ff4f1..5f65ff0 100644
---
a/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/activemq.json
+++
b/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/activemq.json
@@ -108,7 +108,7 @@
"requestTimeoutCheckerInterval": { "kind": "property", "displayName":
"Request Timeout Checker Interval", "group": "advanced", "label": "advanced",
"required": false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "1000",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Configures how often
Camel should check for timed out Exchanges when do [...]
"synchronous": { "kind": "property", "displayName": "Synchronous",
"group": "advanced", "label": "advanced", "required": false, "type": "boolean",
"javaType": "boolean", "deprecated": false, "autowired": false, "secret":
false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Sets whether synchronous processing should be
strictly used" },
"transferException": { "kind": "property", "displayName": "Transfer
Exception", "group": "advanced", "label": "advanced", "required": false,
"type": "boolean", "javaType": "boolean", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "If enabled and you are using Request Reply
messaging (InOut) and an Exchange failed on the consu [...]
- "transferExchange": { "kind": "property", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following fi [...]
+ "transferExchange": { "kind": "property", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following fi [...]
"trustAllPackages": { "kind": "property", "displayName": "Trust All
Packages", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "deprecationNote": "",
"autowired": false, "secret": false, "defaultValue": false, "description":
"Define if all Java packages are trusted or not (for Java object JMS message
types). Notice its not recommended practice to send Java serialized objects
over network. Setting this to true [...]
"useMessageIDAsCorrelationID": { "kind": "property", "displayName": "Use
Message IDAs Correlation ID", "group": "advanced", "label": "advanced",
"required": false, "type": "boolean", "javaType": "boolean", "deprecated":
false, "autowired": false, "secret": false, "defaultValue": false,
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Specifies whether
JMSMessageID should always be used as JMSCorrelationID [...]
"waitForProvisionCorrelationToBeUpdatedCounter": { "kind": "property",
"displayName": "Wait For Provision Correlation To Be Updated Counter", "group":
"advanced", "label": "advanced", "required": false, "type": "integer",
"javaType": "int", "deprecated": false, "autowired": false, "secret": false,
"defaultValue": 50, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Number of times to wait for provisional c [...]
@@ -210,7 +210,7 @@
"requestTimeoutCheckerInterval": { "kind": "parameter", "displayName":
"Request Timeout Checker Interval", "group": "advanced", "label": "advanced",
"required": false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "1000",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Configures how often
Camel should check for timed out Exchanges when d [...]
"synchronous": { "kind": "parameter", "displayName": "Synchronous",
"group": "advanced", "label": "advanced", "required": false, "type": "boolean",
"javaType": "boolean", "deprecated": false, "autowired": false, "secret":
false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Sets whether synchronous processing should be
strictly used" },
"transferException": { "kind": "parameter", "displayName": "Transfer
Exception", "group": "advanced", "label": "advanced", "required": false,
"type": "boolean", "javaType": "boolean", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "If enabled and you are using Request Reply
messaging (InOut) and an Exchange failed on the cons [...]
- "transferExchange": { "kind": "parameter", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following f [...]
+ "transferExchange": { "kind": "parameter", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following f [...]
"useMessageIDAsCorrelationID": { "kind": "parameter", "displayName": "Use
Message IDAs Correlation ID", "group": "advanced", "label": "advanced",
"required": false, "type": "boolean", "javaType": "boolean", "deprecated":
false, "autowired": false, "secret": false, "defaultValue": false,
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Specifies whether
JMSMessageID should always be used as JMSCorrelationID [...]
"waitForProvisionCorrelationToBeUpdatedCounter": { "kind": "parameter",
"displayName": "Wait For Provision Correlation To Be Updated Counter", "group":
"advanced", "label": "advanced", "required": false, "type": "integer",
"javaType": "int", "deprecated": false, "autowired": false, "secret": false,
"defaultValue": 50, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Number of times to wait for provisional [...]
"waitForProvisionCorrelationToBeUpdatedThreadSleepingTime": { "kind":
"parameter", "displayName": "Wait For Provision Correlation To Be Updated
Thread Sleeping Time", "group": "advanced", "label": "advanced", "required":
false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "100",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Interval in [...]
diff --git
a/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/amqp.json
b/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/amqp.json
index d051502..426983e 100644
---
a/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/amqp.json
+++
b/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/amqp.json
@@ -106,7 +106,7 @@
"requestTimeoutCheckerInterval": { "kind": "property", "displayName":
"Request Timeout Checker Interval", "group": "advanced", "label": "advanced",
"required": false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "1000",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Configures how often
Camel should check for timed out Exchanges when do [...]
"synchronous": { "kind": "property", "displayName": "Synchronous",
"group": "advanced", "label": "advanced", "required": false, "type": "boolean",
"javaType": "boolean", "deprecated": false, "autowired": false, "secret":
false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Sets whether synchronous processing should be
strictly used" },
"transferException": { "kind": "property", "displayName": "Transfer
Exception", "group": "advanced", "label": "advanced", "required": false,
"type": "boolean", "javaType": "boolean", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "If enabled and you are using Request Reply
messaging (InOut) and an Exchange failed on the consu [...]
- "transferExchange": { "kind": "property", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following fi [...]
+ "transferExchange": { "kind": "property", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following fi [...]
"useMessageIDAsCorrelationID": { "kind": "property", "displayName": "Use
Message IDAs Correlation ID", "group": "advanced", "label": "advanced",
"required": false, "type": "boolean", "javaType": "boolean", "deprecated":
false, "autowired": false, "secret": false, "defaultValue": false,
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Specifies whether
JMSMessageID should always be used as JMSCorrelationID [...]
"waitForProvisionCorrelationToBeUpdatedCounter": { "kind": "property",
"displayName": "Wait For Provision Correlation To Be Updated Counter", "group":
"advanced", "label": "advanced", "required": false, "type": "integer",
"javaType": "int", "deprecated": false, "autowired": false, "secret": false,
"defaultValue": 50, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Number of times to wait for provisional c [...]
"waitForProvisionCorrelationToBeUpdatedThreadSleepingTime": { "kind":
"property", "displayName": "Wait For Provision Correlation To Be Updated Thread
Sleeping Time", "group": "advanced", "label": "advanced", "required": false,
"type": "duration", "javaType": "long", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": "100", "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Interval in [...]
@@ -206,7 +206,7 @@
"requestTimeoutCheckerInterval": { "kind": "parameter", "displayName":
"Request Timeout Checker Interval", "group": "advanced", "label": "advanced",
"required": false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "1000",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Configures how often
Camel should check for timed out Exchanges when d [...]
"synchronous": { "kind": "parameter", "displayName": "Synchronous",
"group": "advanced", "label": "advanced", "required": false, "type": "boolean",
"javaType": "boolean", "deprecated": false, "autowired": false, "secret":
false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Sets whether synchronous processing should be
strictly used" },
"transferException": { "kind": "parameter", "displayName": "Transfer
Exception", "group": "advanced", "label": "advanced", "required": false,
"type": "boolean", "javaType": "boolean", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "If enabled and you are using Request Reply
messaging (InOut) and an Exchange failed on the cons [...]
- "transferExchange": { "kind": "parameter", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following f [...]
+ "transferExchange": { "kind": "parameter", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following f [...]
"useMessageIDAsCorrelationID": { "kind": "parameter", "displayName": "Use
Message IDAs Correlation ID", "group": "advanced", "label": "advanced",
"required": false, "type": "boolean", "javaType": "boolean", "deprecated":
false, "autowired": false, "secret": false, "defaultValue": false,
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Specifies whether
JMSMessageID should always be used as JMSCorrelationID [...]
"waitForProvisionCorrelationToBeUpdatedCounter": { "kind": "parameter",
"displayName": "Wait For Provision Correlation To Be Updated Counter", "group":
"advanced", "label": "advanced", "required": false, "type": "integer",
"javaType": "int", "deprecated": false, "autowired": false, "secret": false,
"defaultValue": 50, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Number of times to wait for provisional [...]
"waitForProvisionCorrelationToBeUpdatedThreadSleepingTime": { "kind":
"parameter", "displayName": "Wait For Provision Correlation To Be Updated
Thread Sleeping Time", "group": "advanced", "label": "advanced", "required":
false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "100",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Interval in [...]
diff --git
a/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/jms.json
b/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/jms.json
index bed7ed6..8be05ae 100644
---
a/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/jms.json
+++
b/catalog/camel-catalog-provider-springboot/src/main/resources/org/apache/camel/springboot/catalog/components/jms.json
@@ -106,7 +106,7 @@
"requestTimeoutCheckerInterval": { "kind": "property", "displayName":
"Request Timeout Checker Interval", "group": "advanced", "label": "advanced",
"required": false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "1000",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Configures how often
Camel should check for timed out Exchanges when do [...]
"synchronous": { "kind": "property", "displayName": "Synchronous",
"group": "advanced", "label": "advanced", "required": false, "type": "boolean",
"javaType": "boolean", "deprecated": false, "autowired": false, "secret":
false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Sets whether synchronous processing should be
strictly used" },
"transferException": { "kind": "property", "displayName": "Transfer
Exception", "group": "advanced", "label": "advanced", "required": false,
"type": "boolean", "javaType": "boolean", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "If enabled and you are using Request Reply
messaging (InOut) and an Exchange failed on the consu [...]
- "transferExchange": { "kind": "property", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following fi [...]
+ "transferExchange": { "kind": "property", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following fi [...]
"useMessageIDAsCorrelationID": { "kind": "property", "displayName": "Use
Message IDAs Correlation ID", "group": "advanced", "label": "advanced",
"required": false, "type": "boolean", "javaType": "boolean", "deprecated":
false, "autowired": false, "secret": false, "defaultValue": false,
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Specifies whether
JMSMessageID should always be used as JMSCorrelationID [...]
"waitForProvisionCorrelationToBeUpdatedCounter": { "kind": "property",
"displayName": "Wait For Provision Correlation To Be Updated Counter", "group":
"advanced", "label": "advanced", "required": false, "type": "integer",
"javaType": "int", "deprecated": false, "autowired": false, "secret": false,
"defaultValue": 50, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Number of times to wait for provisional c [...]
"waitForProvisionCorrelationToBeUpdatedThreadSleepingTime": { "kind":
"property", "displayName": "Wait For Provision Correlation To Be Updated Thread
Sleeping Time", "group": "advanced", "label": "advanced", "required": false,
"type": "duration", "javaType": "long", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": "100", "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Interval in [...]
@@ -206,7 +206,7 @@
"requestTimeoutCheckerInterval": { "kind": "parameter", "displayName":
"Request Timeout Checker Interval", "group": "advanced", "label": "advanced",
"required": false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "1000",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Configures how often
Camel should check for timed out Exchanges when d [...]
"synchronous": { "kind": "parameter", "displayName": "Synchronous",
"group": "advanced", "label": "advanced", "required": false, "type": "boolean",
"javaType": "boolean", "deprecated": false, "autowired": false, "secret":
false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Sets whether synchronous processing should be
strictly used" },
"transferException": { "kind": "parameter", "displayName": "Transfer
Exception", "group": "advanced", "label": "advanced", "required": false,
"type": "boolean", "javaType": "boolean", "deprecated": false, "autowired":
false, "secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "If enabled and you are using Request Reply
messaging (InOut) and an Exchange failed on the cons [...]
- "transferExchange": { "kind": "parameter", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following f [...]
+ "transferExchange": { "kind": "parameter", "displayName": "Transfer
Exchange", "group": "advanced", "label": "advanced", "required": false, "type":
"boolean", "javaType": "boolean", "deprecated": false, "autowired": false,
"secret": false, "defaultValue": false, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "You can transfer the exchange over the wire
instead of just the body and headers. The following f [...]
"useMessageIDAsCorrelationID": { "kind": "parameter", "displayName": "Use
Message IDAs Correlation ID", "group": "advanced", "label": "advanced",
"required": false, "type": "boolean", "javaType": "boolean", "deprecated":
false, "autowired": false, "secret": false, "defaultValue": false,
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Specifies whether
JMSMessageID should always be used as JMSCorrelationID [...]
"waitForProvisionCorrelationToBeUpdatedCounter": { "kind": "parameter",
"displayName": "Wait For Provision Correlation To Be Updated Counter", "group":
"advanced", "label": "advanced", "required": false, "type": "integer",
"javaType": "int", "deprecated": false, "autowired": false, "secret": false,
"defaultValue": 50, "configurationClass":
"org.apache.camel.component.jms.JmsConfiguration", "configurationField":
"configuration", "description": "Number of times to wait for provisional [...]
"waitForProvisionCorrelationToBeUpdatedThreadSleepingTime": { "kind":
"parameter", "displayName": "Wait For Provision Correlation To Be Updated
Thread Sleeping Time", "group": "advanced", "label": "advanced", "required":
false, "type": "duration", "javaType": "long", "deprecated": false,
"autowired": false, "secret": false, "defaultValue": "100",
"configurationClass": "org.apache.camel.component.jms.JmsConfiguration",
"configurationField": "configuration", "description": "Interval in [...]
diff --git
a/components-starter/camel-activemq-starter/src/main/docs/activemq-starter.adoc
b/components-starter/camel-activemq-starter/src/main/docs/activemq-starter.adoc
index abde141..5f91fe8 100644
---
a/components-starter/camel-activemq-starter/src/main/docs/activemq-starter.adoc
+++
b/components-starter/camel-activemq-starter/src/main/docs/activemq-starter.adoc
@@ -119,7 +119,7 @@ The component supports 103 options, which are listed below.
| *camel.component.activemq.transaction-name* | The name of the transaction to
use. | | String
| *camel.component.activemq.transaction-timeout* | The timeout value of the
transaction (in seconds), if using transacted mode. | -1 | Integer
| *camel.component.activemq.transfer-exception* | If enabled and you are using
Request Reply messaging (InOut) and an Exchange failed on the consumer side,
then the caused Exception will be send back in response as a
javax.jms.ObjectMessage. If the client is Camel, the returned Exception is
rethrown. This allows you to use Camel JMS as a bridge in your routing - for
example, using persistent queues to enable robust routing. Notice that if you
also have transferExchange enabled, this opti [...]
-| *camel.component.activemq.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the p [...]
+| *camel.component.activemq.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the p [...]
| *camel.component.activemq.trust-all-packages* | Define if all Java packages
are trusted or not (for Java object JMS message types). Notice its not
recommended practice to send Java serialized objects over network. Setting this
to true can expose security risks, so use this with care. | false | Boolean
| *camel.component.activemq.use-message-id-as-correlation-id* | Specifies
whether JMSMessageID should always be used as JMSCorrelationID for InOut
messages. | false | Boolean
| *camel.component.activemq.use-pooled-connection* | Enables or disables
whether a PooledConnectionFactory will be used so that when messages are sent
to ActiveMQ from outside of a message consuming thread, pooling will be used
rather than the default with the Spring JmsTemplate which will create a new
connection, session, producer for each message then close them all down again.
The default value is true. | true | Boolean
diff --git
a/components-starter/camel-activemq-starter/src/main/java/org/apache/camel/component/activemq/springboot/ActiveMQComponentConfiguration.java
b/components-starter/camel-activemq-starter/src/main/java/org/apache/camel/component/activemq/springboot/ActiveMQComponentConfiguration.java
index b447022..129f546 100644
---
a/components-starter/camel-activemq-starter/src/main/java/org/apache/camel/component/activemq/springboot/ActiveMQComponentConfiguration.java
+++
b/components-starter/camel-activemq-starter/src/main/java/org/apache/camel/component/activemq/springboot/ActiveMQComponentConfiguration.java
@@ -717,8 +717,8 @@ public class ActiveMQComponentConfiguration
* You must enable this option on both the producer and consumer side, so
* Camel knows the payloads is an Exchange and not a regular payload. Use
* this with caution as the data is using Java Object serialization and
- * requires the received to be able to deserialize the data at Class level,
- * which forces a strong coupling between the producers and consumer having
+ * requires the receiver to be able to deserialize the data at Class level,
+ * which forces a strong coupling between the producers and consumers
having
* to use compatible Camel versions!
*/
private Boolean transferExchange = false;
diff --git
a/components-starter/camel-amqp-starter/src/main/docs/amqp-starter.adoc
b/components-starter/camel-amqp-starter/src/main/docs/amqp-starter.adoc
index 8dc5866..e30ac4b 100644
--- a/components-starter/camel-amqp-starter/src/main/docs/amqp-starter.adoc
+++ b/components-starter/camel-amqp-starter/src/main/docs/amqp-starter.adoc
@@ -119,7 +119,7 @@ The component supports 100 options, which are listed below.
| *camel.component.amqp.transaction-name* | The name of the transaction to
use. | | String
| *camel.component.amqp.transaction-timeout* | The timeout value of the
transaction (in seconds), if using transacted mode. | -1 | Integer
| *camel.component.amqp.transfer-exception* | If enabled and you are using
Request Reply messaging (InOut) and an Exchange failed on the consumer side,
then the caused Exception will be send back in response as a
javax.jms.ObjectMessage. If the client is Camel, the returned Exception is
rethrown. This allows you to use Camel JMS as a bridge in your routing - for
example, using persistent queues to enable robust routing. Notice that if you
also have transferExchange enabled, this option t [...]
-| *camel.component.amqp.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the paylo [...]
+| *camel.component.amqp.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the paylo [...]
| *camel.component.amqp.use-message-id-as-correlation-id* | Specifies whether
JMSMessageID should always be used as JMSCorrelationID for InOut messages. |
false | Boolean
| *camel.component.amqp.username* | Username to use with the
ConnectionFactory. You can also configure username/password directly on the
ConnectionFactory. | | String
| *camel.component.amqp.wait-for-provision-correlation-to-be-updated-counter*
| Number of times to wait for provisional correlation id to be updated to the
actual correlation id when doing request/reply over JMS and when the option
useMessageIDAsCorrelationID is enabled. | 50 | Integer
diff --git
a/components-starter/camel-amqp-starter/src/main/java/org/apache/camel/component/amqp/springboot/AMQPComponentConfiguration.java
b/components-starter/camel-amqp-starter/src/main/java/org/apache/camel/component/amqp/springboot/AMQPComponentConfiguration.java
index ba005a2..5bd6fdd 100644
---
a/components-starter/camel-amqp-starter/src/main/java/org/apache/camel/component/amqp/springboot/AMQPComponentConfiguration.java
+++
b/components-starter/camel-amqp-starter/src/main/java/org/apache/camel/component/amqp/springboot/AMQPComponentConfiguration.java
@@ -699,8 +699,8 @@ public class AMQPComponentConfiguration
* You must enable this option on both the producer and consumer side, so
* Camel knows the payloads is an Exchange and not a regular payload. Use
* this with caution as the data is using Java Object serialization and
- * requires the received to be able to deserialize the data at Class level,
- * which forces a strong coupling between the producers and consumer having
+ * requires the receiver to be able to deserialize the data at Class level,
+ * which forces a strong coupling between the producers and consumers
having
* to use compatible Camel versions!
*/
private Boolean transferExchange = false;
diff --git
a/components-starter/camel-jms-starter/src/main/docs/jms-starter.adoc
b/components-starter/camel-jms-starter/src/main/docs/jms-starter.adoc
index 2988df6..f46c00a 100644
--- a/components-starter/camel-jms-starter/src/main/docs/jms-starter.adoc
+++ b/components-starter/camel-jms-starter/src/main/docs/jms-starter.adoc
@@ -118,7 +118,7 @@ The component supports 99 options, which are listed below.
| *camel.component.jms.transaction-name* | The name of the transaction to use.
| | String
| *camel.component.jms.transaction-timeout* | The timeout value of the
transaction (in seconds), if using transacted mode. | -1 | Integer
| *camel.component.jms.transfer-exception* | If enabled and you are using
Request Reply messaging (InOut) and an Exchange failed on the consumer side,
then the caused Exception will be send back in response as a
javax.jms.ObjectMessage. If the client is Camel, the returned Exception is
rethrown. This allows you to use Camel JMS as a bridge in your routing - for
example, using persistent queues to enable robust routing. Notice that if you
also have transferExchange enabled, this option ta [...]
-| *camel.component.jms.transfer-exchange* | You can transfer the exchange over
the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the payloa [...]
+| *camel.component.jms.transfer-exchange* | You can transfer the exchange over
the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the payloa [...]
| *camel.component.jms.use-message-i-d-as-correlation-i-d* | Specifies whether
JMSMessageID should always be used as JMSCorrelationID for InOut messages. |
false | Boolean
| *camel.component.jms.username* | Username to use with the ConnectionFactory.
You can also configure username/password directly on the ConnectionFactory. |
| String
| *camel.component.jms.wait-for-provision-correlation-to-be-updated-counter* |
Number of times to wait for provisional correlation id to be updated to the
actual correlation id when doing request/reply over JMS and when the option
useMessageIDAsCorrelationID is enabled. | 50 | Integer
diff --git
a/components-starter/camel-jms-starter/src/main/java/org/apache/camel/component/jms/springboot/JmsComponentConfiguration.java
b/components-starter/camel-jms-starter/src/main/java/org/apache/camel/component/jms/springboot/JmsComponentConfiguration.java
index 7dab1d3..6628103 100644
---
a/components-starter/camel-jms-starter/src/main/java/org/apache/camel/component/jms/springboot/JmsComponentConfiguration.java
+++
b/components-starter/camel-jms-starter/src/main/java/org/apache/camel/component/jms/springboot/JmsComponentConfiguration.java
@@ -683,8 +683,8 @@ public class JmsComponentConfiguration
* You must enable this option on both the producer and consumer side, so
* Camel knows the payloads is an Exchange and not a regular payload. Use
* this with caution as the data is using Java Object serialization and
- * requires the received to be able to deserialize the data at Class level,
- * which forces a strong coupling between the producers and consumer having
+ * requires the receiver to be able to deserialize the data at Class level,
+ * which forces a strong coupling between the producers and consumers
having
* to use compatible Camel versions!
*/
private Boolean transferExchange = false;
diff --git a/docs/modules/ROOT/pages/activemq-starter.adoc
b/docs/modules/ROOT/pages/activemq-starter.adoc
index abde141..5f91fe8 100644
--- a/docs/modules/ROOT/pages/activemq-starter.adoc
+++ b/docs/modules/ROOT/pages/activemq-starter.adoc
@@ -119,7 +119,7 @@ The component supports 103 options, which are listed below.
| *camel.component.activemq.transaction-name* | The name of the transaction to
use. | | String
| *camel.component.activemq.transaction-timeout* | The timeout value of the
transaction (in seconds), if using transacted mode. | -1 | Integer
| *camel.component.activemq.transfer-exception* | If enabled and you are using
Request Reply messaging (InOut) and an Exchange failed on the consumer side,
then the caused Exception will be send back in response as a
javax.jms.ObjectMessage. If the client is Camel, the returned Exception is
rethrown. This allows you to use Camel JMS as a bridge in your routing - for
example, using persistent queues to enable robust routing. Notice that if you
also have transferExchange enabled, this opti [...]
-| *camel.component.activemq.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the p [...]
+| *camel.component.activemq.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the p [...]
| *camel.component.activemq.trust-all-packages* | Define if all Java packages
are trusted or not (for Java object JMS message types). Notice its not
recommended practice to send Java serialized objects over network. Setting this
to true can expose security risks, so use this with care. | false | Boolean
| *camel.component.activemq.use-message-id-as-correlation-id* | Specifies
whether JMSMessageID should always be used as JMSCorrelationID for InOut
messages. | false | Boolean
| *camel.component.activemq.use-pooled-connection* | Enables or disables
whether a PooledConnectionFactory will be used so that when messages are sent
to ActiveMQ from outside of a message consuming thread, pooling will be used
rather than the default with the Spring JmsTemplate which will create a new
connection, session, producer for each message then close them all down again.
The default value is true. | true | Boolean
diff --git a/docs/modules/ROOT/pages/amqp-starter.adoc
b/docs/modules/ROOT/pages/amqp-starter.adoc
index 8dc5866..e30ac4b 100644
--- a/docs/modules/ROOT/pages/amqp-starter.adoc
+++ b/docs/modules/ROOT/pages/amqp-starter.adoc
@@ -119,7 +119,7 @@ The component supports 100 options, which are listed below.
| *camel.component.amqp.transaction-name* | The name of the transaction to
use. | | String
| *camel.component.amqp.transaction-timeout* | The timeout value of the
transaction (in seconds), if using transacted mode. | -1 | Integer
| *camel.component.amqp.transfer-exception* | If enabled and you are using
Request Reply messaging (InOut) and an Exchange failed on the consumer side,
then the caused Exception will be send back in response as a
javax.jms.ObjectMessage. If the client is Camel, the returned Exception is
rethrown. This allows you to use Camel JMS as a bridge in your routing - for
example, using persistent queues to enable robust routing. Notice that if you
also have transferExchange enabled, this option t [...]
-| *camel.component.amqp.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the paylo [...]
+| *camel.component.amqp.transfer-exchange* | You can transfer the exchange
over the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the paylo [...]
| *camel.component.amqp.use-message-id-as-correlation-id* | Specifies whether
JMSMessageID should always be used as JMSCorrelationID for InOut messages. |
false | Boolean
| *camel.component.amqp.username* | Username to use with the
ConnectionFactory. You can also configure username/password directly on the
ConnectionFactory. | | String
| *camel.component.amqp.wait-for-provision-correlation-to-be-updated-counter*
| Number of times to wait for provisional correlation id to be updated to the
actual correlation id when doing request/reply over JMS and when the option
useMessageIDAsCorrelationID is enabled. | 50 | Integer
diff --git a/docs/modules/ROOT/pages/jms-starter.adoc
b/docs/modules/ROOT/pages/jms-starter.adoc
index 2988df6..f46c00a 100644
--- a/docs/modules/ROOT/pages/jms-starter.adoc
+++ b/docs/modules/ROOT/pages/jms-starter.adoc
@@ -118,7 +118,7 @@ The component supports 99 options, which are listed below.
| *camel.component.jms.transaction-name* | The name of the transaction to use.
| | String
| *camel.component.jms.transaction-timeout* | The timeout value of the
transaction (in seconds), if using transacted mode. | -1 | Integer
| *camel.component.jms.transfer-exception* | If enabled and you are using
Request Reply messaging (InOut) and an Exchange failed on the consumer side,
then the caused Exception will be send back in response as a
javax.jms.ObjectMessage. If the client is Camel, the returned Exception is
rethrown. This allows you to use Camel JMS as a bridge in your routing - for
example, using persistent queues to enable robust routing. Notice that if you
also have transferExchange enabled, this option ta [...]
-| *camel.component.jms.transfer-exchange* | You can transfer the exchange over
the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the payloa [...]
+| *camel.component.jms.transfer-exchange* | You can transfer the exchange over
the wire instead of just the body and headers. The following fields are
transferred: In body, Out body, Fault body, In headers, Out headers, Fault
headers, exchange properties, exchange exception. This requires that the
objects are serializable. Camel will exclude any non-serializable objects and
log it at WARN level. You must enable this option on both the producer and
consumer side, so Camel knows the payloa [...]
| *camel.component.jms.use-message-i-d-as-correlation-i-d* | Specifies whether
JMSMessageID should always be used as JMSCorrelationID for InOut messages. |
false | Boolean
| *camel.component.jms.username* | Username to use with the ConnectionFactory.
You can also configure username/password directly on the ConnectionFactory. |
| String
| *camel.component.jms.wait-for-provision-correlation-to-be-updated-counter* |
Number of times to wait for provisional correlation id to be updated to the
actual correlation id when doing request/reply over JMS and when the option
useMessageIDAsCorrelationID is enabled. | 50 | Integer
diff --git a/tooling/camel-spring-boot-dependencies/pom.xml
b/tooling/camel-spring-boot-dependencies/pom.xml
index 455d860..e31ac34 100644
--- a/tooling/camel-spring-boot-dependencies/pom.xml
+++ b/tooling/camel-spring-boot-dependencies/pom.xml
@@ -4320,142 +4320,142 @@
<dependency>
<groupId>org.apache.cxf.services.sts</groupId>
<artifactId>cxf-services-sts-core</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf.services.ws-discovery</groupId>
<artifactId>cxf-services-ws-discovery-api</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-core</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-bindings-soap</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-bindings-xml</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-databinding-jaxb</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-features-clustering</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-features-logging</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-frontend-jaxrs</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-frontend-jaxws</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-frontend-simple</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-management</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-rs-client</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-rs-extension-providers</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-rs-security-oauth2</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-rs-service-description-swagger</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-transports-http</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-transports-http-jetty</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-transports-jms</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-transports-local</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-ws-addr</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-ws-mex</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-ws-policy</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-ws-rm</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-ws-security</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-ws-security-oauth2</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-rt-wsdl</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.cxf</groupId>
<artifactId>cxf-testutils</artifactId>
- <version>3.4.3</version>
+ <version>3.4.4</version>
</dependency>
<dependency>
<groupId>org.apache.ftpserver</groupId>
