David, I had a similar situation and found the drive axle for the impeller had slid away from the slot on the water pump drive. Mine has a gap on the impeller housing to see the shaft turning. I had to remove the water pump and bang the axle in a bit further.
Mike On Fri, May 30, 2025 at 3:34 PM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I noticed today when i turned the engine on that i could not hear water > coming out the transom port. Just air bubbles. Also the temp gauge read > zero which i am guessing would happen with no water near sensor. Opened > intake strainer cap and water comes in when seacock is opened. Took cover > off sherwood water pump and looks normal inside. No missing vanes. Opened > seacock and water came out of hose from the intake. I’m stuck. Any ideas? > C&c 34+ > Universal m4-30 > Thanks. Dave > > Sent from my iPhone > Your contributions help pay the fees associated with this list and help to > keep it active. Please help by making a small contribution using PayPal > at: https://www.paypal.com/paypalme/stumurray All contributions are > greatly appreciated.
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
