I had similar problem that I fixed by having a small brass plate made with vin number stamped on it. I epoxied it to the upper port corner of the transom. No problems in the US or Mexico. Fred Hazzard Fury C&C 44 Portland Or
On Fri, Nov 8, 2024 at 3:55 AM Motion Designs Limited via CnC-List < cnc-list@cnc-list.com> wrote: > So Ken Heaton confirmed the information I had heard that they stamped a > second place. > > On his 1990 37/40 XL it’s stamped port side in front of the water tank > into the bulkhead > > What I now wonder is when did they start this. > > JKC > > > www.ghcarchives.com > Motion Designs Limited > 647 990 7752 > > On Nov 7, 2024, at 8:46 PM, Don Harben <sailadventu...@rogers.com> wrote: > > What year is it ? 1977 > > > Don > > On Thursday, November 7, 2024, 8:38 PM, Motion Designs Limited via > CnC-List <cnc-list@cnc-list.com> wrote: > > What year is it ? It wasn’t till much later that they added a number > inside ( which I haven’t seen photographic evidence of yet ) but I’ve been > told …. > > Could he sand the area and hope to find it ? > > JohnKelly Cuthbertson > > > www.ghcarchives.com > Motion Designs Limited > 647 990 7752 > > On Nov 7, 2024, at 7:49 PM, Dave S via CnC-List <cnc-list@cnc-list.com> > wrote: > > > > Or could be. > > Dave > Ex 33-2 windstar > > > Sent from my iPhone > > On Nov 7, 2024, at 6:55 PM, Don Harben via CnC-List <cnc-list@cnc-list.com> > wrote: > > > > Hi Don, > > A friend from OYS Dave Moro with the green C &C 29 mark 1Is having issues > with his insurance company …they are refusing to pay because the boats > serial number was obliterated when the topsides were refinished! He has the > number on his ships paperwork…but they are being silly…. Perhaps the number > was also hidden below somewhere. > > > Don Harben > Now a Chaser Cat 18 > > Viking 34 > CC 29 mk 1 > CC 24 > >