We had a C&C 34 that we bought new in 1981, and had the boat until 2018.
The first thing that we did was to replace the primaries with Barient 28 self-tailing winches. I'm not sure what size that equates to with other brands now that Barient is no longer around. We flew a 153% jib, raced a lot, and it was an adequate size. I know that cost is always a consideration, but as someone else said, it never hurts to oversize, especially as we get older. FYI, there's a couple Barient 28 self-tailing winches on eBay right now, and parts are still available to rebuild if needed. Richard Arper C&C 34+ Xanax rtar...@wavecable.com Bremerton, WA From: Jeffrey A. Laman via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Tuesday, September 12, 2023 7:46 AM To: Stus-List Cc: Jeffrey A. Laman Subject: Stus-List Re: Winch Size for C&C34 Hello all, I have attempted to search the archives for information and opinions on new primary winches for C&C34, but was not able to locate a discussion. If there has been, my apologies. It has become apparent that the old, Lewmar, self-tailing, 2-spd winches that came on my boat are not adequate -- in a moderate wind with a 155 genoa it takes two crew cranking with all their strength to bring the sheet in far enough. I and the crew are not getting younger, either -- average age about 65 to 70. I don't know the details of gear ratios and power ratio for these old Lewmars, but am investigating so I have that as a reference. If any of you C&C34, or similar sized boat, owners have recommendations for replacement, 2-spd, self-tailing winches, I would be grateful. I frequently sail solo and hope to be able to continue for another 10 to 15 years (if I live to be 80!), so I need to factor that in the decision. Also, any experiences or recommendations for the actual removal and installation would be great too! Thanks. Jeff Laman 1981 C&C34 Harmony Ludington, MI
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
