It is going up just forward of the bulkhead aft of the stove and then will run horizontal aft at the top of that storage area outboard of the icebox and then to the stern.
A quick test with my adapter and a one-pound grill bottle shows all is well, now I need to get the tank mount set up. I REALLY should have foamed in a 1” conduit instead of trapping the old CNG line………..if only I had a time machine back to about 1988 or so…..”Hey DUMMY! You might one day want another hose in there!” Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: Dennis C. via CnC-List <cnc-list@cnc-list.com> Sent: Friday, June 30, 2023 4:14 PM To: Stus-List <cnc-list@cnc-list.com> Cc: Dennis C. <capt...@gmail.com> Subject: Stus-List Re: Force 10 Stove Joe, Can you run under the stove then up the forward side between the stove and the forward half bulkhead? I might not be visualizing accurately. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, Jun 30, 2023 at 1:45 PM Joe Della Barba via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: It FITS!!!!!!!!!!!!!!!!!!!!!!!! Yeah!!!!!! The side mounts are EXACTLY right. The only part that needs changing is the hole where the gimbal lock goes, I need to drill it about ¾” forward of where it is now. I am so relieved 😊 One issue I am not sure about is the sliding board that goes over the stove. I had to run the propane hose straight up, going besides the icebox is not possible because I foamed that all in about 20 years ago. That board will contact the hose when retracted. I have though about cutting a little half circle relief in it or just not using it. The cutting board from the old stove will work if I cut about ½” off the outboard edge and it looks nice. Note to Force 10 owners: The sparker is very fiddly. Some voltmeter sleuthing uncovered the fact the battery holder cap needs to be screwed on just so or the negative side of the battery does not make contact. Speaking of, I bought some AA lithiums so I don’t have to climb under the stove and swap it out anytime soon. Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu -- Dennis C. Touche' 35-1 #83 Mandeville, LA
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
