My friend Bill Coleman on this list cautioned me against using Clorox in the bilge for fear of damaging the stainless keel bolts.
From: dwight veinot via CnC-List <cnc-list@cnc-list.com> Sent: Wednesday, February 15, 2023 7:29 PM To: Stus-List <cnc-list@cnc-list.com> Cc: dwight veinot <dwight...@gmail.com> Subject: Stus-List Re: Shower Add some anti bacterial detergent to the bilge and maybe a cup of chlorox/javex once in a while On Wed, Feb 15, 2023 at 7:01 PM Korbey Hunt via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Ive found it useful in removing oils. Get Outlook for Android <https://aka.ms/AAb9ysg> _____ From: Matt Wolford via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Sent: Wednesday, February 15, 2023 12:51:33 PM To: 'Stus-List' <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: wolf...@erie.net <mailto:wolf...@erie.net> <wolf...@erie.net <mailto:wolf...@erie.net> > Subject: Stus-List Re: Shower Probably the reason for a separate pump and discharge that by-passes the bilge. From: David Risch via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Sent: Wednesday, February 15, 2023 2:46 PM To: Stus-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: David Risch <davidrisc...@msn.com <mailto:davidrisc...@msn.com> > Subject: Stus-List Re: Shower I have heard discharging shower grey water into bilge created a soapy/scummy mess in the bilge? From: Robert Abbott via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Sent: Wednesday, February 15, 2023 2:11 PM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Robert Abbott <robertabb...@eastlink.ca <mailto:robertabb...@eastlink.ca> > Subject: Stus-List Shower My 32 has the same set up...shower hose from the sink facet...sump with a teak grate....sump pump under the sink for a separate discharge just below the toe rail opposite the head starboard side. All woks fine but never use it. Rob Abbott AZURA C&C 32 - #277 Halifax, N.S. On 2023-02-15 1:59 p.m., Matt Wolford via CnC-List wrote: That was the set-up on the 42 Custom. A shower hose was integral to the sink faucet. On my boat, the shower head was attached to a wall rack for adjusting the height. The floor is a teak grate with a very thin plastic catch pan underneath. The pan drained to a “sump” pump with a separate discharge. I removed everything but the drain pan, which now has a hose to drain to the bilge. I’m in the process of installing a shower on deck for use after swimming. From: Bill Coleman via CnC-List <mailto:cnc-list@cnc-list.com> <cnc-list@cnc-list.com> Sent: Wednesday, February 15, 2023 12:38 PM To: Stus-List <mailto:cnc-list@cnc-list.com> <cnc-list@cnc-list.com> Cc: Bill Coleman <mailto:colt...@gmail.com> <colt...@gmail.com> Subject: Stus-List Re: Shower drain Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu -- Sent from Gmail Mobile
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
