I had the same issue I replaced it with a Grocco flush mount. Glassed the area then drilled a new hole then used a small router with a bearing guide and a 45 degree bit to route the chamfer. I also replaced the seacock with a Grocco and their backing plate. I epoxied the backing plate in place then used the backing plate as the guide for the router bit. Hope this helps.
Frank H Foxfire 38-2 > On Jan 19, 2023, at 5:40 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > > None of the Perko, Groco or Buck Algonquin flush mount thruhull fittings were > close? > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Thu, Jan 19, 2023, 11:13 AM Tom A via CnC-List <cnc-list@cnc-list.com > <mailto:cnc-list@cnc-list.com>> wrote: > Hello all, > > I had to replace my stbd cockpit drain Seacock and unfortunately could not > save the thru-hull fitting. It is a flush mount style that fits into a > recessed space on the hull. I’ve looked at a few manufacturers, but nothing > matches up great. Before I start a salvage search, or try to adapt a new one, > I was wondering if anybody had any advice. > > https://drive.google.com/file/d/16YqXM8JLY596Io3Ay_VKXnsXBCECw2_8/view?usp=share_link > > <https://drive.google.com/file/d/16YqXM8JLY596Io3Ay_VKXnsXBCECw2_8/view?usp=share_link> > Thanks > > Tom > > C&C 36 > > Please show your appreciation for this list and the Photo Album site and help > me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray <https://www.paypal.me/stumurray> > Thanks for your help. > Stu > Please show your appreciation for this list and the Photo Album site and help > me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray > Thanks for your help. > Stu
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
