I am using these numbers: http://cncphotoalbum.com/doityourself/torquebolts/torquebolts.htm
Are they wrong? Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: Wyatt via CnC-List <cnc-list@cnc-list.com> Sent: Tuesday, September 13, 2022 10:52 AM To: Stus-List <cnc-list@cnc-list.com> Cc: j...@dellabarba.com; Wyatt <wyattchamp...@gmail.com> Subject: Stus-List Re: C&C 35 MK I Keel Bolts That’s too much torque? I’ve seen C&C specs based on nut size, and for my 36-1 it was around 150 ft-lb On Tue, Sep 13, 2022 at 10:46 AM Joe Della Barba via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: I should have driven down and got it. 350 pounds is a LOT. My arms are still sore! FYI – what you think is really tight with a normal extension is about 150 pounds, not 350. I have about 4 feet total to get to 350. If anyone needs to borrow the torque meter let me know. Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: Josh via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Sent: Monday, September 5, 2022 4:18 PM To: Stus-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: Josh <muckl...@gmail.com <mailto:muckl...@gmail.com> > Subject: Stus-List Re: C&C 35 MK I Keel Bolts You can come borrow my torque multiplier. https://www.youtube.com/watch?v=n6B0IPKQERc Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD Sep 5, 2022 14:09:28 Joe Della Barba via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> >: Those sizes are correct – thanks! I don’t have a torque wrench that big, so I have them “tight”. I just ordered this thing, so I can set them exactly: https://www.amazon.com/dp/B009GLITFW?psc=1 <https://www.amazon.com/dp/B009GLITFW?psc=1&smid=ATVPDKIKX0DER&ref_=chk_typ_imgToDp> &smid=ATVPDKIKX0DER&ref_=chk_typ_imgToDp Joe Della Barba Coquina C&C 35 MK I Kent Island MD USA From: Thomas Delaney via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Sent: Sunday, August 28, 2022 10:08 AM To: Stus-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Cc: j...@dellabarba.com <mailto:j...@dellabarba.com> ; Thomas Delaney <tomcdela...@gmail.com <mailto:tomcdela...@gmail.com> > Subject: Stus-List Re: C&C 35 MK I Keel Bolts Hi Joe, I believe it is 1 1/8" for the front-most nut and 1 1/2" for the rest. Best, Tom
