After a thorough scrubbing and cleaning of old residue try Penetrol coating. It was originally designed tor coating the inside of gas pipelines to stop them from corroding. The gelcoat has to be clean or it will film over any residue or oxidation. They make a Marine version but the lumber store product is pretty much or the same product. Safe on fibreglass just due prep work. Good luck.james C&C 33 Mark II
> On Mar 28, 2022, at 8:21 PM, Korbey Hunt via CnC-List <cnc-list@cnc-list.com> > wrote: > > Vlean with Oxalic acid and apply wax. > > Get Outlook for Android <https://aka.ms/AAb9ysg> > From: Andy Frame via CnC-List <cnc-list@cnc-list.com> > Sent: Monday, March 28, 2022 10:25:59 AM > To: cnc-list@cnc-list.com <cnc-list@cnc-list.com> > Cc: Andy Frame <svmar...@pm.me> > Subject: Stus-List Engine Oil Staining Transom > > > I obtained an old two-stroke Suzuki Sail-8 for my first outboard for my > 24. It has a few issues, one being is flings small amounts of oil at the > transom, so now I have some minor staining. It's less of a spot, and > more of a discolored patch where the oil has absorbed. > > I am looking for any kind of coating that I can temporarily use for the > season to minimize the damage until I have the opportunity to haul-out > this coming winter. Or if there is something that I can wipe the area > down with after each outing that won't damage the gelcoat (such as it > is). Maybe something as simple as Dawn & a scrub brush? > > I'd rather do a little preventive now, than have a major cleanup issue > in nine months. > > Thanks in advance. > > -- > s/v MaryMe > 1975 C&C 24 > Labelle, FL USA > Amateur Radio WD4RCC
