How can I tell the maker of the hatch’s used on my 1986 C&C 44? Fred Hazzard S/V Fury Portland Or.
Sent from my iPhone > On Feb 17, 2022, at 4:17 PM, Dreuge via CnC-List <cnc-list@cnc-list.com> > wrote: > > > The gaskets that A&H used are EPDM foam cord. This can be purchased in 3ft, > 10ft, or 100ft lengths from McMaster-Carr at “non-marine” prices. The > Landfall 38 hatches use 3/8” diameter foam cord for the small head/galley > and 1/2” diameter cord for the larger A&H hatches. For the small hatches > which were repaired first, I used the A&H recommended Silaprene Adhesive to > glue in the gaskets. When I later replaced the gaskets for the larger A&H > hatches, I used Dow 795 as the gasket adhesive. Since I was using the Dow > 795 for reseating a new hatch lens, I saved on gasket adhesive costs. The > Dow 795 worked just as good if not better than the Silaprene Adhesive. I > highly recommend Dow 795 as the gasket adhesive over the Silaprene. One pay > a premium for Silaprene as it is not common and very limited in availability > whereas a 10oz cartridge of Dow 795 cost $12 at McMaster-Carr. > > Below are links to McMaster-Carr for the EPDM foam cord and Dow 795 and 2 > links to my blog write-up for the hatch work. > > https://www.mcmaster.com/gaskets/foam/ultra-weather-resistant-epdm-foam-cords/ > > https://www.mcmaster.com/dow-795/manufacturer~dow-corning/manufacturer-model-number~795/ > > > Write-up for replacing larger A&H hatch lens and gasket > > https://svjohannarose.blogspot.com/2019/01/replace-atkins-hoye-hatch-lens.html > > > Write-up for replacing the smaller A&H hatch lens and gasket > https://svjohannarose.blogspot.com/search/label/HatchWork > > > > > - > Paul E. > 1981 C&C Landfall 38 > S/V Johanna Rose > Fort Walton Beach, FL > > http://svjohannarose.blogspot.com/ > >> On Feb 16, 2022, at 6:52 PM, Robert Abbott via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> >> >> I got replacement gaskets from Hammerhead Nautical Systems...the owner used >> to work for A&H....he even sent me a tube a adhesive to install them at no >> cost. >> >> About | Hammerhead Nautical Systems (hhns.ca) >> >> Rob Abbott >> AZURA >> C&C 32 - #277 >> Halifax, N.S. >> >> On 2022-02-13 9:35 p.m., RON CASCIATO via CnC-List wrote: >>> >>> >>> Andrew, give Hatchmasters in Norwalk, CT. a call. >>> It's been a few years but they have the parts and rebuilt my A&H hatch >>> nicely. >>> Ron C. >>> Impromptu >>> 38MKII, '77 >>> >> >> cnc-list@cnc-list.com ---- cnc-list > > cnc-list@cnc-list.com ---- cnc-list
cnc-list@cnc-list.com ---- cnc-list
