Test #2
-----Original Message----- From: Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> Sent: February 14, 2022 10:50 AM To: 'Stus-List' <cnc-list@cnc-list.com> Cc: Hoyt, Mike <mike.h...@impgroup.com> Subject: Stus-List email test Sorry about the extra traffic. Trying subscribing using my gmail account to see if the html problem persists there. Mike -----Original Message----- From: Rick Brass via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: February 13, 2022 11:54 AM To: Stus-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Rick Brass <rickbr...@earthlink.net<mailto:rickbr...@earthlink.net>> Subject: Stus-List Re: Forward hatch gasket needed When I rebuilt my A&H foredeck hatches (two of them now) I bought the seal material from a local glass shop that installs commercial plate glass windows like you see in stores and office buildings. I forget what the tubular rubber seal is actually called. But if you take a couple of inches of what you have into the glass shop, they can cut you a length of the great big roll they probably have . I can't recall if I used 3/8" diameter or 1/2". The adhesive I used was 3M trim adhesive that would be used to install a rubrail on a car. The idea of going to McMaster Carr is also a good idea, and a lot less expensive that buying from A&H or another boat supplier. The only downside is what you do with the 90+ feet of rubber you will have left over after you rebuild the hatch. Rick Brass Imzadi C&C 38 mk1 la Belle Aurore C&C 25 Washington, NC -----Original Message----- From: Stus-List Sent: Feb 12, 2022 1:51 PM To: Stus-List Cc: Bob Mann Subject: Stus-List Forward hatch gasket needed The foam gasket on my C&C35 mk I's forward hatch is coming apart. Can anyone suggest where I can find a replacement? Nothing I've seen at hardware stores even comes close to what is already there. regards, Bob Mann Mystic Detroit
