Thanks Dwight We do not have radar so everything we have to make them see us helps
Happy 2022 Mike From: dwight veinot via CnC-List <cnc-list@cnc-list.com> Sent: December 31, 2021 4:46 PM To: Stus-List <cnc-list@cnc-list.com> Cc: dwight veinot <dwight...@gmail.com> Subject: Stus-List Re: Seatalk NG / Nema 2000 device connections I see. I have all the Raymarine gear displayed on instruments in a pod above the companion way. Speed, depth, wiind speed and angle true and apparrent and also a graphic display that gives me digital apparent wind angle and windspeed readout or any othe combination of up to 4 parsmeters display. I pay careful attention to apparent wind angle and speed thru the water when trimming for performance short legs and vmg for longer hauls. I hope those big ships are watching for you but happy at least that you can see them. I rely on my old Furuno radar display in the cabin but visible from the wheel when unexpectedly caught in fog. I do very little after dark sailing. Sometimes it’s a nightmare just keeping the simple instruments i have working. More wire more connections more possible failure spots. On Fri, Dec 31, 2021 at 4:26 PM Hoyt, Mike via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hi Dwight Short answer is NO – not always. Better answer is that I want other vessels to see me when doing coastal trips at night and in the fog. We already receive AIS so I see the big tankers that will plow us under doing 14 knots and I want them to see us before that happens. The rest of the gear? I like knowing Speed over Water especially when racing. I like not hitting bottom so depth can also be important. Smart people know the wind speed and direction but for the rest of us having it displayed is nice. For the setup it turns out that Raymarine has a SeatalkNG to Nema 2000 spur connector and you can plug in directly to SeatalkNG backbone. This does give me a reason to climb up the ladder in the winter to run my newly installed diesel heater and tinker with the boat though .. All the best Mike From: dwight veinot via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: December 31, 2021 3:32 PM To: Stus-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: dwight veinot <dwight...@gmail.com<mailto:dwight...@gmail.com>> Subject: Stus-List Re: Seatalk NG / Nema 2000 device connections Mike. Do you really need all that gear to sail your boat well or are you just interested in the challenge of seeing if you can make it all work, at least long enough for proof test. Hahaha Happy New Year On Thu, Dec 30, 2021 at 11:21 AM Hoyt, Mike via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Thanks Dave Sounds like I need a A06045/A06075 SeatalkNG to Nema 2000 cable and plug right into Seatalk NG backbone. That is pretty simple Now I just have to climb back into the cold dark boat to see what backbone currently looks like so I will know which of and how many of the other $49 each Seatalk NG bits and pieces I will need to add From: Dave S via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: December 30, 2021 11:10 AM To: Stus-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Dave S <syerd...@gmail.com<mailto:syerd...@gmail.com>> Subject: Stus-List Re: Seatalk NG / Nema 2000 device connections Yes, you can buy an adaptor or make one with a field attachable connector. Seatalk NG is or rather was Raymarine's attempt to make the NMEA 2000 standard effectively proprietary. I have a Seatalk NG backbone and a range of NMEA2000 devices - it works seamlessly. Dave On Thu, 30 Dec 2021 at 09:17, Hoyt, Mike via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Likely a question for Fred Street Currently Persistence has Raymarine i50/i60 Speed/Depth/Wind and Raymarine a65 multifunction display/chartplotter connected via Seatalk NG network Have just acquired Em-trak B923 AIS transponder with built in antenna splitter. Wish to also connect B923 to a65. B923 has Nema -0183 and Nema2000 connections. A65 has SeatalkNG and Nema2000 ports. A65 currently using SeatalkNG port to communicate with i50/i60 instruments. Nema2000 port unused. Power connector has only three prongs so do not believe this model has the Nema 0183 wiring How do I most easily (and cost effectively) connect the B923 to the a65 so that I can see AIS targets? Can I simply purchase a SeatalkNG to Nema2000 cable and plug B923 into SeatalkNG backbone? https://www.defender.com/product3.jsp?path=-1|344|2028705|2028879&id=1108756#<https://www.defender.com/product3.jsp?path=-1%7C344%7C2028705%7C2028879&id=1108756> That seems too simple a solution and too good to be true. Alternatively do I need to set up a Nema 2000 backbone in addition to (and separately from) the existing SeatalkNG backbone and then connect to the Nema 2000 ports on the a65 and the B923? Will this cause issues since the a65 is also connected using SeatalkNG port to the Seatalk backbone? This seems very complicated compared to the older Nema 0183 connectivity. Thanks Mike Hoyt Persistence Halifax, NS www.hoytsailing.com<http://www.hoytsailing.com> Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Sent from Gmail Mobile Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
