Krylon makes a zinc galvanizing paint that you can find on most hardware store spray paint shelves.
Andrew Burton 26 Beacon Hill Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Oct 26, 2021, at 06:06, dwight veinot via CnC-List <cnc-list@cnc-list.com> > wrote: > > > Where do you get “zinc paint”? > >> On Mon, Oct 25, 2021 at 11:40 PM Alan Liles via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Here in Vancouver, my boat guru suggested zinc paint for the prop and shaft. >> I wasn’t too sure but now I’ve seen several yards using it. My prop and >> shaft come out of the water (yearly) without hard growth on them. I’m sold. >> >> Al Liles >> SV Elendil, C&C 37/40+ >> Vancouver BC >> >> >>>> On Oct 25, 2021, at 2:37 PM, John and Maryann Read via CnC-List >>>> <cnc-list@cnc-list.com> wrote: >>>> >>> >> >>> Second Petit Prop Paint. One must be careful with copper based paint on >>> stainless and bronze running gear; >>> >>> >>> >>> >>> >>> John and Maryann (dec’d 7/18/2021) >>> >>> Legacy III >>> >>> 1982 C&C 34 >>> >>> Noank, CT >>> >>> >>> >>> >>> >>> >>> >>> From: Neil Andersen via CnC-List [mailto:cnc-list@cnc-list.com] >>> Sent: Monday, October 25, 2021 3:52 PM >>> To: Stus-List >>> Cc: Neil Andersen >>> Subject: Stus-List Re: Bottom Paints Again >>> >>> >>> >>> I use Petit prop paint with good results >>> >>> >>> >>> Neil Andersen >>> >>> 1982 Ca& C 32, FoxFire >>> >>> Rock Hall, MD 21661 >>> >>> From: Dean McNeill via CnC-List <cnc-list@cnc-list.com> >>> Sent: Monday, October 25, 2021 3:36 PM >>> To: Stus-List >>> Cc: Dean McNeill >>> Subject: Stus-List Re: Bottom Paints Again >>> >>> >>> >>> First full season for me with my C&C 34 and I used Interlux Micron CSC, as >>> that’s what the previous owner ’thought’ was on it when I bought it. A good >>> friend has also used it on his Tartan 3700 for years with good results. >>> >>> >>> >>> I used 2 to 3 coats after a light sanding of the previous coat(s) and it >>> has worked very well. Five months moored in the Northwest Arm in Halifax NS >>> and it was surprisingly super clean when it came out at end of season… a >>> little green scum in places but that’s it! Stainless prop shaft was caked >>> with barnacles and growth, so I’m guessing bottom paint worked great where >>> it was applied! >>> >>> >>> >>> Does anyone coat their stainless prop shaft (or brass folding prop) with >>> bottom paint? >>> >>> >>> >>> Dean >>> >>> >>> >>> Thanks to all of the subscribers that contributed to the list to help with >>> the costs involved. If you want to show your support to the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >>> Stu >> Thanks to all of the subscribers that contributed to the list to help with >> the costs involved. If you want to show your support to the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - >> Stu > -- > Sent from Gmail Mobile > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
