We put a Racor 500 on Perception, located under the sink for easy access, 
replaces a spin on which was nothing but issues changing the filters and 
priming. We had a lot of ‘stuff’ in the diesel fuel when we bought Perception, 
and went thru a lot of filters in the early days.

Paul Fountain
Perception II
1985 C&C 33-II k/cb
Port Credit Yacht Club




From: Dave S via CnC-List <cnc-list@cnc-list.com>
Sent: October 17, 2021 7:47 AM
To: Stus-List <cnc-list@cnc-list.com>
Cc: Dave S <syerd...@gmail.com>
Subject: Stus-List Re: Racer diesel filter assemblies

Missing some info in my choice below - I agree with Andy’s comments about the 
shortcomings of the spin-on types which are known to be a PITA, however my 
installation location could not tidily accommodate a larger filter - also it’s 
worth checking not only the height of the filter but the required clearances 
above and below.

Dave - 33-2
Sent from my iPhone


On Oct 16, 2021, at 8:38 PM, Dave S via CnC-List 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
After wading through the various models and -to me at least- someway confusing 
product info, recently purchased a new Racor 215R30 as a primary filter for my 
Yanmar 2GM.  I have not installed it yet.  Check industrial channels for this 
as I purchased mine for about 2/3 the price of an identical unit through marine 
channels.  This unit is oversized for our little engines and though it seemed 
large at first it will install neatly in windstar.  (33-2). The model I chose 
has a glass bowl and integral priming pump.

Dave
Sent from my iPhone


On Oct 16, 2021, at 4:44 PM, David Knecht via CnC-List 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
I am considering replacing my old Racor primary filter assembly (currently 30 
µm filter) with one of the newer ones, but I am unsure what the difference is 
between them and hoping someone can clarify differences I might not recognize.  
I was initially looking at the 500 series turbine units which start around 
$200.  But there are also 120 series spin on units that are less than $100 and 
seem like they should work:
https://www.defender.com/product.jsp?path=-1|311|2349059|2837510&id=133972#<https://www.defender.com/product.jsp?path=-1%7C311%7C2349059%7C2837510&id=133972>

Does anyone know if there is a reason not to use the less expensive models?  I 
plan to also add a remote vacuum gauge at the helm station if that matters.  
Thanks- Dave

S/V Aries
1990 C&C 34+
New London, CT



Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to