I’d love to use something more like a socket. I’m not familiar with 12 point sockets. I’ll go look at google now. Thanks!
> On Sep 23, 2021, at 12:41 pm, Bill Coleman via CnC-List > <cnc-list@cnc-list.com> wrote: > > Or would a 12 point socket work? > > Bill Coleman > > On Thu, Sep 23, 2021, 3:35 AM Bob Tallman via CnC-List <cnc-list@cnc-list.com > <mailto:cnc-list@cnc-list.com>> wrote: > Great toy store indeed. Make sure to keep the length to a minimum to avoid > too much rocking. > For grins regarding the size, is it 7/16, or is it 1/2? > Just thinking if the measurements are in line with a ratchet drive, the > square stock could be just a double ended female and use a ratchet drive. > A socket will fit over the square shaft, and then you can use a standard > setup to crank the boom. > > Who is the manufacturer of the furling boom? > Picture or two of the interface in question? > > > On Wed, Sep 22, 2021 at 9:57 PM Dennis C. via CnC-List <cnc-list@cnc-list.com > <mailto:cnc-list@cnc-list.com>> wrote: > Go to mcmaster.com <http://mcmaster.com/> and order a piece of square tubing > the correct size. When you get it, drill holes through one end and put a > screwdriver or long bolt through it. Use it to square up the boom. > > https://www.mcmaster.com/square-tubing/ > <https://www.mcmaster.com/square-tubing/> > > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Wed, Sep 22, 2021 at 6:29 PM andrew_m--- via CnC-List > <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: > We recently purchased a 1974 C&C 30 mk1. Our boat has a roller furling boom, > but didn?t come with the crank handle. Does anyone know where I can a get a > crank handle for the roller furling boom on a 1974 C&C 30 mk1? have one I can > borrow (we're near Victoria BC)? or know of another tool that'll work in > place of the original crank handle? Our boom's stuck at about 30 degrees from > where it should be and I'd love to turn it back. > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > <https://www.paypal.me/stumurray> Thanks - Stu > > > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use PayPal > to send contribution -- https://www.paypal.me/stumurray > <https://www.paypal.me/stumurray> Thanks - Stu > -- > Regards, > > Bob Tallman > 631.387.6748 > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > <https://www.paypal.me/stumurray> Thanks - Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
