Funny I was just on the phone with a guy in Keswick ON yesterday who installs both the Plasteak and the EVA. I want to jazz up my cabin sole and discussed options with him. He's got a 6 week waiting period on the plasteak delivery and told me I should hang tough until the spring. He orders the foam stuff from Florida not sure where the plastic comes from. Anyhoo The plasteak is more expensive and harder on the feet plus it heats up more quickly with the warmer temps while the EVA is cheaper, softer and less reactive to the temperature changes- so he says...
On Mon, 20 Sept 2021 at 11:51, George Cone via CnC-List < cnc-list@cnc-list.com> wrote: > I think that is the same product I used, I choose the gray color, the only > caution I can provide, is use a very sharp knife and it will come out > great. the is does seem to wear well. > > > > george cone > > C&C 40 > > > > *From:* CHARLES SCHEAFFER via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, September 20, 2021 10:19 AM > *To:* Stus-List <cnc-list@cnc-list.com> > *Cc:* strig...@eastlink.ca; CHARLES SCHEAFFER <cscheaf...@comcast.net> > *Subject:* Stus-List Re: Eva faux decking > > > > I plan to use EVA foam on my cockpit floor. I bought two rolls of EVA > that look like teak for $73/roll. I probably could get away with a single > roll, but wanted extra material in case. I have no idea how well it will > hold up. > > > > > https://www.amazon.com/CHURERSHINING-Decking-Marine-Flooring-Adhesive/dp/B07P6ZMW3G/ref=sr_1_2?dchild=1&keywords=boat%2Bdeck%2Bcovering&qid=1611610224&sr=8-2&th=1 > > > > Chuck S > > On 09/20/2021 9:53 AM Richard Bush via CnC-List <cnc-list@cnc-list.com> > wrote: > > > > > > > > George, can you define what is considered "inexpensive"? Also, any photos? > Thanks! > > > > Richard > > s/v Bushmark4: 1985 C&C 37 CB: Ohio River, Mile 584; > > > > Richard N. Bush Law Offices > > 2950 Breckenridge Lane, Suite Nine > > Louisville, Kentucky 40220-1462 > > 502-584-7255 > > > > > > -----Original Message----- > From: George Cone via CnC-List <cnc-list@cnc-list.com> > To: Stus-List <cnc-list@cnc-list.com> > Cc: Rod Stright <strig...@eastlink.ca>; George Cone <gc...@alpinesy.com> > Sent: Mon, Sep 20, 2021 9:10 am > Subject: Stus-List Re: Eva faux decking > > I put some very inexpensive eva on my cockpit for a test, planning to > replace it with expensive material if it worked. I had two goals, one the > admiral wanted something softer to sit on, and two my lab was always > sliding around and uncomfortable when to boatwould lean. I was concerned > the dog would tear up the foam with his claws, and also the material would > stain and look dirty. This cheap material passed all tests with flying > colors. I can only imagine how the expensive stuff performs. > > Highly recommend the use of it. > > Thanks > > George > > C&C40 > > Burlington, VT > > > > Get Outlook for Android <https://aka.ms/AAb9ysg> > ------------------------------ > > *From:* Rod Stright via CnC-List <cnc-list@cnc-list.com> > *Sent:* Monday, September 20, 2021 7:55:15 AM > *To:* 'Stus-List' <cnc-list@cnc-list.com> > *Cc:* Rod Stright <strig...@eastlink.ca> > *Subject:* Stus-List Eva faux decking > > > > Has anyone use the EVA teak marine decking? If so do you recommend it and > are you aware of a supplier here in Canada and/or Nova Scotia? > > > > *Rod* > > *Halifax* > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - > Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - > Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
