So, after the recent discussion on anchors I too grabbed 15kg genuine Bruce
on Kijiji for use on my 33-2, which currently has 50' HT chain (3/8| I
believe) and a 10kg bruce, a setup that has never failed me.  This anchor
and chain weighs around 100lb.     I bought the second Bruce as a backup
for cruising as \i have none, and I have no windlass.
The 15kg bruce is of course 50% larger than the 10kg but it feels around 3X
as awkward on the foredeck, though it does fil and just as well.  My sense
though is that it, along with the 50' of chain, will be extremely secure
once set but at or a bit beyond my comfort level for hand retrieval.
If I reduced the chain to 40' from 50, the anchor and chain would again
weigh around 100lb.   Retrieval becomes progressively easier with
progressively less chain.   So, with the weight constraint of hand
retrieval, Anchor size vs chain quantity becomes  a tradeoff..  (clearly
this makes a powerful case for super high holding power anchors)
For optimal holding power, how much or how little chain is optimal?   There
are likely diminishing returns in this formula but where?
Thanks for any input or musings!

Dave Windstar, 33-2
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to