The power boat that was docked next to me at a marina in Florida 
experienced such a failure. I was there when it happened. The owner 
knocked on my boat and wanted a portable water pump if I had one. Long 
story short, water came in faster than the bilge pumps could get it out 
and he got an emergency tow $$$ to the travel lift for a haul out. There 
was another failure that I did not personally witness within a year or 
so of that event. This was at a 600 slip marina, not a scientific sample 
or experiment I concede, but enough to scare me off. I make no claim 
that the devices were properly maintained, just that bronze packing 
glands don't shatter. It may be that newer "dripless" designs exist that 
won't fail in this way, I don't know, but I know for a fact that some 
designs can and do under some circumstances.
Steve Thomas
C&C27 MKIII - Ontario
C&C36 MKI - Florida


   ------ Original Message ------
   From: cnc-list@cnc-list.com
   To: cnc-list@cnc-list.com
Cc: jlam...@outlook.com
   Sent: Tuesday, July 13, 2021 7:47 AM
   Subject: Stus-List Re: Stuffing Box


 Hello all,



From time to time this discussion of stuffing box vs PSS dripless comes up and catastrophic failure is typically mentioned.


Has anyone on this list experienced a PSS catastrophic failure (that is the fault of PSS) or have direct knowledge of someone who did?


 Installed PSS 4 years ago. Maintenance free = more time sailing.



 Jeff Laman


 1981 C&C34


 Harmony


 Ludington, Mi




 Get Outlook for Android <https://aka.ms/AAb9ysg>



From: Robert Boyer via CnC-List <cnc-list@cnc-list.com>
 Sent: Tuesday, July 13, 2021 7:34:29 AM
 To: Stus-List <cnc-list@cnc-list.com>
 Cc: Robert Boyer <dainyr...@icloud.com>
 Subject: Stus-List Re: Stuffing Box



I’ve had a PSS shaft seal for our long time on our LF38 with no problems except when a shaft key broke and allowed the shaft to slip. However, the same thing could have happened with packing. I would never consider going back to packing.

Bob


Bob Boyer
s/v Rainy Days

C&C Landfall 38 (Hull # 230)

(Spending winters in warm places, and summers on the Chesapeake Bay)

blog: dainyrays.blogspot.com

email: dainyr...@icloud.com


On Jul 13, 2021, at 7:26 AM, Marek Dziedzic via CnC-List <cnc-list@cnc-list.com> wrote:




+1 on that; though I have mine for only 9 years.

Marek

1994 #122 ”Legato”
Ottawa, ON





From: ssjohnson via CnC-List
 Sent: Monday, July 12, 2021 11:10 PM
 To: Stus-List <cnc-list@cnc-list.com>
 Cc: ssjohnson <ssjohn...@aol.com>
 Subject: Stus-List Re: Stuffing Box




I've had a PSS shafted, and a DRY bilge for 10 years...think it is great.

Spencer Johnson


84 LF38


Racine, WI




Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu

Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray <https://www.paypal.me/stumurray> Thanks - Stu



Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to