OK so, Steve Mallet was the first to respond and he's looking for the lower
stuff. I'm in Rehoboth Massachusetts. I'm sure the foils can be shipped. Just
need a longer box and its all about cost from there. The thing is still
completely assembled at the boatyard, in a rack, currently in Barrington RI.
I'll have to try and get over there and start pulling it apart. Although, time
is always the issue, My boat is now in Mattapoisett Ma in the completely
opposite direction. I'll see what I can do about getting it apart. No one
seems to be in a big hurry, would these just be spares to have on hand? I think
the first thing to do is get the thing broken down and out of the boatyard.
I'll keep you all posted on how that goes. Danny
---------- Original Message ----------
From: dukatolla--- via CnC-List <cnc-list@cnc-list.com>
To: Danny Haughey via CnC-List <cnc-list@cnc-list.com>
Cc: "dukato...@hotmail.com" <dukato...@hotmail.com>
Subject: Stus-List Re: Old Harken Roller II
Date: Fri, 9 Jul 2021 16:51:45 +0000 (UTC)
Hi Danny, I have a Harken II Unit 1 Same as Bruno.... Spare Connectors and a
Foil......would be a great thing to have in the parts department. Cheers Johnny
Wright1970 C&C36RSault Ste Marie, Ontario, Canada On Friday, July 9, 2021,
11:19:32 a.m. EDT, Danny Haughey via CnC-List <cnc-list@cnc-list.com> wrote:
HI Guys, I replaced my old harken roller furler with a new Sheafer. Before I
toss it, I thought I'd see if anyone needed any parts. Maybe I should send it
to one of the used boat parts places. At least maybe it could go to use rather
than being trashed... I replaced the old harken traveler too. So, I still have
that laying around. DannyThanks to all of the subscribers that contributed to
the list to help with the costs involved. If you want to show your support to
the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
