First off, as Dwight mentioned, you need to find out why it is rotting. No
sense in doing anything until you resolve that problem. Then, some pictures
from the other side would be helpful to you. Also, take an ice pick and find
out how rotten the wood is. If this is one of those deals, where they put it
in as the boat was being built, it may be difficult to fit a new piece in
there once you remove what is there. It might not be a bad idea to just
leave it, and sand out all of the rotten stuff, if it is rotten, and just
glass the hell out of it to where it is already tabbed. You're going to have
to do that anyway, so if you just did that, you could just paint a border
around the edge where the glass is and just have white there. Save a little
bit of the mahogany look for the middle if you want to. Or paint the whole
thing white.  

 

 

Bill Coleman

Entrada, Erie, PA

 

 

From: Andrew Walther via CnC-List [mailto:cnc-list@cnc-list.com] 
Sent: Wednesday, May 26, 2021 11:34 PM
To: cnc-list@cnc-list.com
Cc: Andrew Walther
Subject: Stus-List C&C33-2 Forward "Bulkhead"

 

Hi there,

 

Forward most bulkhead is rotting and I can't figure out how to remove it.

 

Here's a video.

 

https://photos.app.goo.gl/e77DRbCFEQnFiBJ99

 

Any help / suggestions would be most appreciated!

 

Thanks!

 

Andy

C&C33-2 (Tryfan)

Comox, BC

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to