On a ralated subject, has anyone tinted white Kiwi Grip to better match the off- white gelcoat surrounding it?
Rob On Sun, May 23, 2021, 11:12 AM Dave S via CnC-List, <cnc-list@cnc-list.com> wrote: > Same question for hull chips - small batch for touch up of my 33-2 > For the deck - > I had a gallonof gel coat tinted by Canada composites - I had a core > section of deck where I polished the non skid and matched it to their box > of samples - worked very well. > > Dave 33-2 windstar > > > > Sent from my iPhone > > On May 23, 2021, at 9:24 AM, Adam Hayden via CnC-List < > cnc-list@cnc-list.com> wrote: > > > Hello > > I am sure this has been asked before. Has anyone produced the colour > charts for gelcoat repair? I replaced a number of stanchion bases and now > have some holes to repair. (I have the epoxy etc just looking for the final > topcoat to match the rest of the deck) > Our decks are that slightly off-white light beige colour. > > I am in Nova Scotia so may try Burnside Fibreglass. > > Thanks > > Adam > C&C 36 > State of Bliss > > Sent from my Bell Samsung device over Canada’s largest network. > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
