And condenser ... Almost forgot Paul ________________________________ From: dwight veinot via CnC-List <cnc-list@cnc-list.com> Sent: Sunday, April 11, 2021 7:05:41 PM To: Stus-List <cnc-list@cnc-list.com> Cc: dwight veinot <dwight...@gmail.com> Subject: Stus-List Re: Atomic 4 trouble shootings
Check the points and make sure the gap is set right On Sun, Apr 11, 2021 at 3:36 PM Joel Delamirande via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Good afternoon gentlemen Does anyone have done a overhaul on the atomic 4 I’m trying to start this engine and getting frustrated of getting no results I’ve been following the Moyer marine video and still no luck Here what I did New spark plug and rotor New dc wiring New starter There spark at the coil I tried many times to do the dead center alignment assuming the engine was rebuilt according to universal specs New dip stick I’m I missing something I’ve tried gaz in the spark plug hole Results oil and gaz shoots out at the flame aresstor Give me a call or text 905 818-1336 -- Joel Delamirande [https://drive.google.com/uc?id=0Bzdvlj_zFQR9UUZyRjFCM0FGejZXeGd5WFVnVTZRb0Y0Q1lZ&export=download] www.jdroofing.ca<http://www.jdroofing.ca> Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
