Hi Charlie, Are you aware of or tried Noah’s in Toronto. That might be the
most likely place.
http://www.noahsmarine.com/
Tom S
From: Charlie Nelson via CnC-List
Sent: Sunday, January 24, 2021 10:49 AM
To: cnc-list@cnc-list.com
Cc: cenel...@aol.com
Subject: Stus-List Interior 'walls'
I think the correct nautical term is 'ceiling" but here is my issue.
My 1995 C&C cabin walls (interior) are covered behind the cabinetry or in the
cubbies with what looks like teak or teak looking plywood pieces ~ 1/8-1/4"
thick which have grooves cut in them about 1 7/8" apart running fore and aft..
It looks like these are held in place with bung covered screws onto to
stringers at the top and bottom of the this teak/plywood.
I am trying to find a source of this grooved wood to replace some in my forward
cabin that was destroyed by a water leak.
So far I have had no luck on the internet but I may need to search deeper
before I give up and have some replacement panels made--I only need about a
piece about 1' x 2' with the grooves running with the 2' sides.
Is this stuff likely available somewhere (maybe in Canada?) or did C&C make
these panels in house?
Thanks in advance--
Charlie Nelson
1995 C&C XL/kcb
Water Phantom
--------------------------------------------------------------------------------
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
