Adam:
I replaced my mast last year, and I have the spreaders which might fit your
boat. They are in decent condition, and if they fit your mast, you won't
have to remove the bases. If you think you might be interested, I can send
you pictures.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR



On Thu, Jan 14, 2021 at 5:34 AM WILLIAM WALKER via CnC-List <
cnc-list@cnc-list.com> wrote:

> Get an impact drill driver with the right size bit and likely will not
> have problem.
> Bill Walker
> C&C 36
> Pentwater, Mi.
>
>
> -----Original Message-----
> From: Adam Hayden via CnC-List <cnc-list@cnc-list.com>
> To: cnc-list@cnc-list.com <cnc-list@cnc-list.com>
> Cc: Adam Hayden <hayden.a...@hotmail.com>
> Sent: Thu, Jan 14, 2021 06:29 AM
> Subject: Stus-List Screw removal
>
>
>
> Hello
>
> I am in the process of ordering new spreaders and the supplier asked to
> send the old bases so the holes can be properly aligned.
>
> The spreader bases are attached by screws.  I have soaked with penetrating
> oil this evening and will soak over night.  I will bring a torch over
> tomorrow.   Any other suggestions would be appreciated.  I would prefer not
> to have to drill them out.
>
> See the attached link
>
> https://photos.app.goo.gl/RuDjmDNgWMELrcoR6
> <https://urldefense.com/v3/__https://photos.app.goo.gl/RuDjmDNgWMELrcoR6__;!!LIr3w8kk_Xxm!9garCHElsQvIeM0s2pzZk_txx79EbFIzSgQATIpbtQdnFIQ32c_SxhMhkVm3Q5TeJE4$>
>
>
> Thanks
> Adam
> C&C 36
> Pictou NS
>
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --  https://www.paypal.me/stumurray
> <https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!9garCHElsQvIeM0s2pzZk_txx79EbFIzSgQATIpbtQdnFIQ32c_SxhMhkVm3CcaJBEU$>
> Thanks - Stu
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!9garCHElsQvIeM0s2pzZk_txx79EbFIzSgQATIpbtQdnFIQ32c_SxhMhkVm3CcaJBEU$
>  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to