Another trick is to use some valve grinding compound on the driver bit. This 
will help in not stripping out the screw head. Doug Mountjoysv Rebecca Leah C&C 
Landfall 39Port Orchard yacht club
-------- Original message --------From: Adam Hayden via CnC-List 
<cnc-list@cnc-list.com> Date: 1/14/21  06:29  (GMT-05:00) To: 
cnc-list@cnc-list.com Cc: Adam Hayden <hayden.a...@hotmail.com> Subject: 
Stus-List Screw removal 



Hello


I am in the process of ordering new spreaders and the supplier asked to send 
the old bases so the holes can be properly aligned.


The spreader bases are attached by screws.  I have soaked with penetrating oil 
this evening and will soak over night.  I will bring a torch over tomorrow.   
Any other suggestions would be appreciated.  I would prefer
 not to have to drill them out.  


See the attached link 


https://photos.app.goo.gl/RuDjmDNgWMELrcoR6



Thanks
Adam
C&C 36
Pictou NS





Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to