David, I had similar problem. As it was not structural I cut out the bad wood 
and glued in a piece of ordinary plywood. I then re-veneered with teak. You can 
buy very thin paper backed teak veneer at specialty hardwood suppliers. 

Fred Hazzard 
C&C 44
S/V Fury
Portland Or 

Sent from my iPhone

> On Jan 10, 2021, at 11:53 AM, David Knecht via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> Thanks for all the ideas. I am not so concerned about the leak (if there 
> still is one).  I should be able to see if water is coming in there using a 
> hose in the spring.  My concern is more how and whether to fix the damage.  
> It is certainly cosmetic, not structural, so not a big worry, and it took me 
> quite a while to even notice it.  I don’t see any obvious was of getting to 
> the back of that panel and I don’t know how to repair it from the front.  I 
> do have an oscillating tool that I could use to cut out the damaged area.  
> Then what?  My woodworking skills are not great.  Better to cover it with a 
> piece of wood (is that plywood or teak?) or try to fill the hole in some way 
> even though I can’t get to the back?  What would make you not cringe if you 
> saw that on someone’s boat?  Dave
> 
> S/V Aries
> 1990 C&C 34+
> New London, CT
> 
> <pastedGraphic.tiff>
> 
>> ayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
> 
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Reply via email to