I got the exact same engine and i use a drill pump attached to that flexible bottom drain to extract the used oil after it has got to operating temp.
On Fri, Oct 16, 2020 at 3:46 PM CHARLES SCHEAFFER <cscheaf...@comcast.net> wrote: > FYI, My Universal M4-30 diesel has an oil drain hose attached to the pan > bottom with a brass end fitting with a threaded plug in the free end. The > brass plug has a hole drilled through the square part that can be tie > wrapped to secure it safely. I typically run the engine till warm and then > connect a hand pump to this hose and suck the oil from the sump. It works > very well and I thought it was OEM. > > At home, I've added a short length of fuel rated hose to my rider mower > for the same convenience when draining the oil clear of the frame. I plug > the end and tie wrap it to the frame. > > Chuck Scheaffer Resolute 1989 C&C 34R, Pasadena Md > October is the time to show your appreciation with a small contribution to > this list to help offset the costs. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Sent from Gmail Mobile
October is the time to show your appreciation with a small contribution to this list to help offset the costs. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
