You are the best!! “Vulcan Waste”. Now that’s all I’m going to try to envision in my head (npi), today. Jon Sent from my iPhone
> On Jul 18, 2020, at 10:32 AM, Edd Schillay via CnC-List > <cnc-list@cnc-list.com> wrote: > > Listers, > > For those of you that are considering updating your head, last month, I > installed a Jabsco Lite Flush Electric head and it’s working beautifully. > Unlike earlier versions of this model which had mixed reviews, this has a > better pump, macerator and belt, along with a simple two-button control panel > (also available in a foot-switch model). The best part is that it mounts on > the same bolts that hold your Jabsco manual flush head so installation is > both clean and easy. > > Here’s a picture of the install: > https://www.dropbox.com/s/uf142xu3l2dwb1f/HeadInstall.jpg?dl=0 > > The control panel mounted easily on the trim (right side of photo with blue > tape) and the cable was easy to run and hide behind it. > > Highly recommend it. > > Of course, for any newbies that come on board, I decided to print up a sign > that will cling to the mirror with detailed instructions on how to use the > head on board the Enterprise. Here’s the sign I made: > https://www.dropbox.com/s/j1d3szqybmc2tuo/HeadInstructions2.jpg?dl=0 > > All the best, > > Edd > > > Edd M. Schillay > Captain of the Starship Enterprise > C&C 37+ | Sail No: NCC-1701-B > Venice Yacht Club | Venice Island, FL > > Starship Enterprise's Captain's Log > > > > > > > > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
