So true! My transmission used to take a full hand push to move, I was
sure the transmission was screwed. New cable, I can move it with a pinky.
Graham Collins
Secret Plans
C&C 35-III #11
On 2020-07-07 12:18 p.m., Steve Thomas via CnC-List wrote:
Thanks Stu and Chuck.
Chuck speaks the truth about the Morse cables. If they are getting tight, you
do need to replace them. Nothing else works and in all probability, you will be
surprised at the improvement. I had owned my 1978 27 for more than 15 years
when I finally replaced the shifter cable and what a difference! It had always
been stiff and I thought that it was the transmission. It was not. Just do it.
Steve Thomas
C&C27 MKIII, Ontario
C&C36 MKI, Florida
---- Stu via CnC-List <cnc-list@cnc-list.com> wrote:
Here is the link to the Edson Engineering Bulletin:
http://cncphotoalbum.com/technical/EB%20236%20ENGINE%20CONTROL%20727%20and%20728.pdf
Enjoy
Stu
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
.
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
