Good morning, i am going to try this again and hopefully the body comes through along with the headers.
Recently purchased a C&C 121. 2000 vintage. This is our third C&C and oh so wish they would create a new line....
Anyhow question i have is simple. The line has an odd location for the throttle. Same for the 115?s, not sure of the 110?s but the throttle/shifter is situated on the starboard side of the cockpit, low down by the engine shut off and tach. I have seen some that have an Edson throttle shifter mounted to the right stansion of the pedestal guard.
Has anyone done the conversion? I am looking at this for my winter project, so just getting ideas and such for my plans....
Thanks,
Bob
Blue Star C&C 121
On Sun, Jun 28, 2020 at 11:06 PM <cnc-list-requ...@cnc-list.com> wrote:
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com
To subscribe or unsubscribe via the World Wide Web, visit
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
cnc-list-requ...@cnc-list.com
You can reach the person managing the list at
cnc-list-ow...@cnc-list.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CnC-List digest..."
Today's Topics:
1. Re: Broken pin in electronic connector (John Conklin)
2. Broken pin in connector. (mike amirault)
3. New boat in town (John Conklin)
4. Sanitation Issues (Peter Cowenhoven)
5. CnC-List Digest - C&C 121 (RLT)
6. Re: Sanitation Issues (David Risch)
---------------------------------------------------------------- ------
Message: 1
Date: Mon, 29 Jun 2020 00:05:50 +0000
From: John Conklin <jconk...@hotmail.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Subject: Re: Stus-List Broken pin in electronic connector
Message-ID:
<BN6PR1301MB1939F106350C17B4C853D0549B6E0@BN6PR1301MB1939.namprd13.prod.outlook. com>
Content-Type: text/plain; charset="utf-8"
I could use the ICOM tech info
Need to replace the whole line from what I am reading? And not just male pin piece Correct
Thanks
John Conklin
S/V Halcyon
S/V Heartbeat
www.flirtingwithfire.com
On Jun 28, 2020, at 7:51 PM, John Conklin <jconk...@hotmail.com> wrote:
? I have similar issue Ram mic works perfect but somehow probably a kick or push several Male pins are bend (all present) and the connection cannot be made
Trip to my local West marine yielded no info or part for this Icom radio :(
Any help is appreciated. Small Tweezers maybe ?
John Conklin
S/V Halcyon
S/V Heartbeat
www.flirtingwithfire.com
On Jun 25, 2020, at 8:51 AM, Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> wrote:
?
I will send Stu $20 right now Joe
From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Joe Della Barba via CnC-List
Sent: June 25, 2020 9:46 AM
To: cnc-list@cnc-list.com
Cc: Joe Della Barba <j...@dellabarba.com>
Subject: Re: Stus-List Broken pin in electronic connector
I have an extra RAM mic setup, the VH-310. If that would work for you.
It looks like this: https://www.locuradigital.com/images_upload/915244de24ba75cec9235406b.jpg
The socket is the same as the other modern RAM microphones.
It as the long cable, the cockpit female socket, and the handset. $20 for Stu and it's yours :)
Joe
Coquina
On 6/25/2020 8:20 AM, Hoyt, Mike via CnC-List wrote:
Hoping to draw from the practical knowledge of this list.
Last evening when plugging in RAM mic for first time this season we found that one of the pins on the male receptacle had broken off and is now stuck in side the female end that is on the RAM mic itself. The RAM mic works perfectly (or did before this) and all that needs to be replaced is the male socket that is attached to the hull.
The question is ?How do I get the broken pin out of the female socket??
I feel the male socket will be quite affordable and the RAM mic would be quite expensive. I would rather not have to replace the RAM mic itself
Thanks
Mike Hoyt
Persistence
Halifax, NS
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200629/ 30ddfc7f/attachment-0001.html>
------------------------------
Message: 2
Date: Sun, 28 Jun 2020 21:46:20 -0300
From: mike amirault <michaelfamira...@gmail.com>
To: cnc-list@cnc-list.com
Subject: Stus-List Broken pin in connector.
Message-ID:
<CA+WMQovCWC48=rfXpre3GLiuJyUm=5zguiFCj0PeePw8WWwmLQ@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
If you or someone you know is really good with a fine tip soldering iron,
you could solder a small wire to the broken pin and pull it out.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200628/ b71ac309/attachment-0001.html>
------------------------------
Message: 3
Date: Mon, 29 Jun 2020 00:54:11 +0000
From: John Conklin <jconk...@hotmail.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Subject: Stus-List New boat in town
Message-ID:
<BN6PR1301MB19399B653ACCECF9B4BCB86C9B6E0@BN6PR1301MB1939.namprd13.prod.outlook. com>
Content-Type: text/plain; charset="utf-8"
Winds Aloft a mid 90?s 34/36+ just landed here in Oriental NC, boat looks great and great condition has a wing keel ?
From Plymouth MI. Anyone know anything of this baby? Met new owner Looks nice, and he got a killer deal! Hoping to get him out there Wed. Nights and also Join the PHRF fleet. New owner was a big time Star sailor and did alot of racing
So Nice to see another C&C here !
John Conklin
S/V Halcyon
www.flirtingwithfire.net
------------------------------
Message: 4
Date: Mon, 29 Jun 2020 02:19:59 +0000 (UTC)
From: Peter Cowenhoven <pscowenho...@yahoo.com>
To: C&C List <cnc-list@cnc-list.com>
Subject: Stus-List Sanitation Issues
Message-ID: <236366706.3573099.1593397199810@mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"
This is a wierd one.? My marine head set up is direct to tank or direct overboard controlled by a Y valve.? I've had issues with pressure in the system so I have been leaving the cap slighty open.??
I'm having an issue with somehow nothing going to the tank even though you hear it but the pumpout hose from the tank fills up while the tank doesn't??? ?
I know there isn't a clog from toilet to tank as I just replaced all the hoses to the tank, the y valve and the head??
Any thoughts?? How the hell is the pumpout hose getting filled but not the tank?
Thanks so much on advance.
Peter84 Landfall 35Westbrook, CT
Sent from Yahoo Mail on Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200629/ 3ffe571a/attachment-0001.html>
------------------------------
Message: 5
Date: Sun, 28 Jun 2020 22:50:12 -0400
From: RLT <rltall...@verizon.net>
To: cnc-list@cnc-list.com
Subject: Stus-List CnC-List Digest - C&C 121
Message-ID: <Mime4j.3.1fc080369442b1dc.172fdfb79f7@imap.gmail.com>
Content-Type: text/plain; charset="us-ascii"
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200628/ 8667d6cc/attachment-0001.html>
------------------------------
Message: 6
Date: Mon, 29 Jun 2020 03:05:33 +0000
From: David Risch <davidrisc...@msn.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Subject: Re: Stus-List Sanitation Issues
Message-ID:
<MN2PR16MB2926581C961CDDF01ACB5358DA6E0@MN2PR16MB2926.namprd16.prod.outlook. com>
Content-Type: text/plain; charset="us-ascii"
Check your vent. Sounds clogged.
Sent from my Android. Please forgive typos. Thank you.
________________________________
From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Peter Cowenhoven via CnC-List <cnc-list@cnc-list.com>
Sent: Sunday, June 28, 2020 10:19:59 PM
To: C&C List <cnc-list@cnc-list.com>
Cc: Peter Cowenhoven <pscowenho...@yahoo.com>
Subject: Stus-List Sanitation Issues
This is a wierd one. My marine head set up is direct to tank or direct overboard controlled by a Y valve. I've had issues with pressure in the system so I have been leaving the cap slighty open.
I'm having an issue with somehow nothing going to the tank even though you hear it but the pumpout hose from the tank fills up while the tank doesn't??
I know there isn't a clog from toilet to tank as I just replaced all the hoses to the tank, the y valve and the head??
Any thoughts? How the hell is the pumpout hose getting filled but not the tank?
Thanks so much on advance.
Peter
84 Landfall 35
Westbrook, CT
Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_ YGrowth_AndroidEmailSig__AndroidUsers& af_wl=ym&af_sub1=Internal&af_sub2= Global_YGrowth&af_sub3=EmailSignature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200629/ 3f31db16/attachment.html>
------------------------------
Subject: Digest Footer
_______________________________________________
CnC-List mailing list
CnC-List@cnc-list.com
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
------------------------------
End of CnC-List Digest, Vol 173, Issue 168
******************************************
Regards,
Bob Tallman
C: 631.387.6748
Bob Tallman
C: 631.387.6748
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
