Are you talking about moving the traveler from the bridge deck to the cabin top? If so, Garhauer makes several traveler risers which might work.
https://www.garhauermarine.com/travelers/traveler-risers/heavy-duty-universal-traveler-riser-ur-2.html Re handrails - most C&C handrails have non-standard spacing. You can easily make your own if you have access to a hole saw, jigsaw and router. Otherwise, there are a couple custom teak sites on the internet which can clone them for you. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Jun 23, 2020 at 11:09 AM Eric Templeton via CnC-List < cnc-list@cnc-list.com> wrote: > Looking for recommendations on a Mainsheet Bridge Traveler to open up the > cockpit / companionway area. > > > > Also looking for replacement Hand Rails (Teak, 6 loop, about 75” length > with 12 in centers for mounting. > > > > C&C 29 Mk1 1979 > > > Eric > > > > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > > *Eric Templeton* > > (C) *+1.630.261.5873* > > etchic...@yahoo.com > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Dennis C. Touche' 35-1 #83 Mandeville, LA
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
