Many boat yards that paint with Awlgrip will have a few remnant cans kicking around, and can usually custom blend a small bottle for you to come fairly close, at least enough that you have to go looking for the repair.
Glen Dickson S/V Nomad I 1990 C&C 34+ Pickering, ON Well hello Al, You didn't do it entirely incorrectly! Haha. You changed the subject - check. You didn't reply to a digest post - check. Good so far! The only thing to improve on is the trimming of the message tails... Especially when they are of an entirely different subject matter. But that's OK, we're glad to have you on the list! As for Awlgrip touch ups you're probably going to have just as much luck with finger nail polish or auto paint touch-up kits from the auto parts store. A professional paint shop could probably match it pretty close...but they would also likely want to sell you a quart. Maybe someone else has some ideas. Good luck, Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Wed, Apr 22, 2020, 08:28 Al Goodman via CnC-List <cnc-list@cnc-list.com> wrote: I hope I didn't do this incorrectly. I am looking for a touchup kit for awlgrip, but have not been able to locate any from any of the standard boat supply houses(west marine, defender, etc) I am looking for marlin blue g5011. I don't need a quart of this stuff only like a small amount. Any help would be greatly appreciated. Once again apologies if this was done incorrectly. Al Goodman 35 ft C&C Mkii Skylark _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
