When I tried to order from Kracor in 2007, they told me to go through Lewis Marine Supply in Fort Lauderdale, FL.(800) 327-3792 or (954) 523-4371. I spoke with Jennifer. Her direct line is (was) (954) 767-1245. Shipping cost will be lower if you have the tank drop shipped to you.
Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Tue, Jan 28, 2020 at 4:20 AM John and Maryann Read via CnC-List < cnc-list@cnc-list.com> wrote: > Hi John > > Perhaps a dumb question, but Kracor must be selling tanks to stay in > business and if they only work through distributors or OEM's there must be > some who will deal with the public???? Will Kracor provide a list of > distributors?? Maybe try some boat OEM's?? > > Best of luck > > John and Maryann > Legacy III > 1982 C&C 34 > Noank, CT > > > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John > McCrea via CnC-List > Sent: Monday, January 27, 2020 9:50 AM > To: 'SEAN CONNER'; cnc-list@cnc-list.com > Cc: John McCrea > Subject: Re: Stus-List CnC-List Digest, Vol 168, Issue 55 > > Thanks Sean. My research had brought me to Ronco for the same 18 gallon > tank. So I must be on the right path. Will get the book! > > -----Original Message----- > From: SEAN CONNER <conner.s...@comcast.net> > Sent: Saturday, January 25, 2020 5:07 AM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List CnC-List Digest, Vol 168, Issue 55 > > I just completed a total head plumbing refit on our new boat, and wanted to > concur with Adrian's comments. I ended up adding a new holding tank as well > (long story) and fortunately I was able to figure out the model of the OEM > Kracor tank. Ronco then used that info and came up with a nearly exact > match. So if you can draft a good dimensional drawing, they will likely > find a stock mold that will fit. For us it ended up being an 18 gallon > tank. I ordered a blank tank and the total cost including shipping to NH > was about $340. BTW, I also used Peggy's book as a guide, and used > Uniseals for the fittings installed on top of tank. easy peasy. Good > luck! > > > > > Message: 2 > > Date: Fri, 24 Jan 2020 16:54:03 -0500 > > From: Adrian Humphreys <adri...@telamontech.com> > > To: cnc-list@cnc-list.com > > Subject: Re: Stus-List Head Tank Replacement. > > Message-ID: <f5a8e2f7-00a1-46bb-80d9-38b8a9412...@telamontech.com> > > Content-Type: text/plain; charset=us-ascii > > > > Ronco-Plastics.com > > > > They have ready-made tooling for a lot of different tanks, and will work > with you to find one that fits your need. Make a dimensioned drawing for > them. The tank is roto-molded when you order, so you can specify the > fittings you want. The original tank under the v-berth on our C&C-33 had > the outlet at the bottom of the vee where it had cracked and leaked. We > specified a "dip-tube" outlet, so all the fittings (inlet, vent, inspection > port, and outlet) are on or near the top. The tank we chose is a very close > match to the original and fits the space well. They will also create custom > tooling, but IIRC, the price estimate started at $2,000+ > > > > Cost was a little over $300 for our 18 gallon tank and fittings; UPS > shipping from California was almost half that. Rich Gray at Ronco was a > great help. > > > > We added all new plumbing, larger vent, hand bilge pump to empty it, an > external sensor kit from ferriellosales.com/monitoring-systems.html > ($150.00), and a lot of labor. The Peggy Hall book was essential to the > planning (amazon.com/New-Get-Rid-Boat-Odors/). > > > > Adrian Humphreys > > Epilogue, Rockport ME > > C&C 33-2 > > adri...@telamontech.com > > > > > > > > > > > On Jan 24, 2020, at 9:30 AM, John McCrea via CnC-List > <cnc-list@cnc-list.com> wrote: > > > > > > Hello. I am in the process of replacing the holding tank on our 1979 > C&C > 36. We bought the boat in 2018 and it had a bladder for a tank under the v. > I want to go back to the original configuration of the 24-gallon plastic > tank. I visited a sister ship last weekend and after taking all the > dimensions, I found the tank on the Kracor website. Kracor no longer sells > to the public. Through some marine industry connections, I did find out > that > Tartan does have the toolings for that tank but said that be prepared to > pay > a lot for it. As in over $500. Does anyone else know of a source for either > a custom tank or something similar to the original? Thanks! > > > > > > John McCrea > > > Talisman > > > Mystic, CT > > > _______________________________________________ > > > > > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use > PayPal to send contribution -- > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=pKXI3D5LcjbKfRIyQAy6h7A69iZjsgQhJKZyy_iGcNE&s=r_9lV__U_5G7TFSserAB1Wkz13Z0MmV2bzGIguIL6-c&e= > > > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=pKXI3D5LcjbKfRIyQAy6h7A69iZjsgQhJKZyy_iGcNE&s=r_9lV__U_5G7TFSserAB1Wkz13Z0MmV2bzGIguIL6-c&e= > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=pKXI3D5LcjbKfRIyQAy6h7A69iZjsgQhJKZyy_iGcNE&s=r_9lV__U_5G7TFSserAB1Wkz13Z0MmV2bzGIguIL6-c&e= > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
