Any pictures?? Neil
Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Don Kern via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, November 14, 2019 12:03 PM To: cnc-list@cnc-list.com Cc: Don Kern Subject: Re: Stus-List Trimming Shawn and Dennis On Fireball (C&C 35 Mk2) I have two sets of tracks. The aft set runs from approximately the fwd cockpit main winch, 6" inboard of the toerail at a slight inboard angle to the second set which run parallel to the deck house to the aft lower shroud about 2" outboard from the on-deck aft spinnaker deck fitting. The angle between the two is slight enough that the twin sheet genoa lead block will pass the junction. Boat carries two of these blocks to facilitate double headsail changes. The no.1 & 2 are lead outboard of all shrouds , the no.3 is lead inboard of aft two shrouds, outboard of the fwd shroud. This winter adding a 2' section of track forward from the fwd shroud parallel to the toe rail to handle the #4 (80%) and the #4 being used as a staysail, being tack on the fwd bow-centerline track. Don Kern Fireball 12708 Bristol RI On 11/13/2019 8:28 PM, Shawn Wright via CnC-List wrote: Thanks! Do you sheet inboard of the forward shroud usually, or does it depend how close to the wind you are? It looks like your aft track is further outboard than mine too, so this must be a mk1 vs mk2 difference, as those positions have factory access panels in the liner. -- Shawn Wright shawngwri...@gmail.com<mailto:shawngwri...@gmail.com> S/V Callisto, 1974 C&C 35 https://www.facebook.com/SVCallisto On Wed, Nov 13, 2019 at 4:17 PM Dennis C. via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Shawn, See: https://drive.google.com/file/d/0B_sb5TfIENvsbTVOZUJqUGN6Sjg/view?usp=drivesdk and https://drive.google.com/file/d/0B_sb5TfIENvsaEhUREJ0LXRDUTg/view?usp=drivesdk That's the track to which I trimTouche's 95% jib and the teak cover for the fasteners. Dennis C. Touche' 35-1 #83 Mandeville, LA _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
