Our 35-2 has a 3 blade Campbell Sailor, 14x8.5, and it seems to work well in both forward and reverse. I would prefer a bit more pitch to get the engine revs lower, but that could be achieved with a different trans ratio also; mine is 2.5:1, and probably should be 2:1 with the large motor I have (4 cyl VW diesel, 48hp) -- Shawn Wright shawngwri...@gmail.com S/V Callisto, 1974 C&C 35 https://www.facebook.com/SVCallisto
On Sun, Oct 20, 2019 at 10:27 AM Brian Davis via CnC-List < cnc-list@cnc-list.com> wrote: > Thank you! Appreciate the info and link. > > On Sun, Oct 20, 2019, 12:56 PM Mike Taylor via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Brian >> >> I have a three blade Campbell Sailor and am very pleased. >> >> http://www.westbynorth.com/campbell-sailer/ >> >> Mike >> C&C 37 >> Begin forwarded message: >> >> *From:* Brian Davis via CnC-List <cnc-list@cnc-list.com> >> *Date:* October 20, 2019 at 10:36:23 AM EDT >> *To:* cnc-list@cnc-list.com >> *Cc:* Brian Davis <brianwdavis...@gmail.com> >> *Subject:* *Stus-List 3 blade prop question* >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
