Now you’ve got me wondering... Since the mast step shoe is at cabin sole level on the transverse grid structure, it’s well above the keel sump and associated bolts. That said, it may still be below the waterline, but not much. I think I’ll take some actual measurements once she is out of the water this fall.
Chuck Sent from my iPhone > On Sep 27, 2019, at 5:49 PM, Neil Andersen <neil.eric.ander...@gmail.com> > wrote: > > Keel stepped is by definition below the waterline, but it certainly gives you > a safe height (a couple of feet to spare). > > Neil > 1982 C&C 32, FoxFire > Rock Hall, MD > > Neil Andersen > 20691 Jamieson Rd > Rock Hall, MD 21661 > > > From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Chuck Borge via > CnC-List <cnc-list@cnc-list.com> > Sent: Friday, September 27, 2019 5:44 PM > To: cnc-list@cnc-list.com > Cc: Chuck Borge > Subject: Re: Stus-List Air draft for C&C 41 (regular production model, 1986) > > When my mast was removed this past Spring, they charged me by the foot, and > measured 62’. Assuming the step is at the waterline and your instruments are > under 2’ above the stick, 64’ is safe. That’s the number I go with. The > Sakonnet River Bridge in Tiverton, RI claims 64’ at high tide, and we haven’t > nicked it yet. > Although I will say that first time made me a bit nervous. > Hope that helps. > > Chuck B > C&C41 Tenacious > Somerset, MA > > Sent from my iPhone > > On Sep 27, 2019, at 4:16 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > >> I taped a 100 foot tape to the top of a long stick then taped the bottom of >> the stick to a halyard, hoisted it so the top of the stick (and tape) was >> raised over the masthead and was even with the tallest thing on the mast >> (VHF antenna), then put the tape on the water. This method should yield a >> result which is a couple inches longer than the actual draft. >> >> Dennis C. >> Touche' 35-1 #83 >> Mandeville, LA >> >>> On Fri, Sep 27, 2019 at 2:31 PM joyce mango via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> Hi- >>> >>> Really struggling to get exact measurement of our mast above waterline on >>> C&C 41 1986 (just the normal design model) to see if we could do the >>> "Hatteras bypass" stretch of the ditch. I'm thinking our air draft is 63 >>> feet, approx, but don't want to hit our newly purchased boat's mast! >>> Anyone know how I can get a more exact measure - did the halyard thing, but >>> measuring from mast to waterline seems impossibly imprecise???? >>> >>> Thanks, >>> Joyce >>> >>> L. Eleanor Joyce Mango >>> joycemang...@gmail.com >>> 978.270.2991 >>> >>> >>> _______________________________________________ >>> >>> Thanks everyone for supporting this list with your contributions. Each and >>> every one is greatly appreciated. If you want to support the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray >>> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >>
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
