Bill,
Harbor Freight is your friend. Stop by the Muskegon HF and pick up a $5
set of picks. You should be able to get one of the angled picks into
the pin hole. I have a set on the boat if you want to come down to
Whitehall this weekend.
Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC
On 8/15/2019 8:40 AM, WILLIAM WALKER via CnC-List wrote:
Same problem here...
Bill Walker
CnC 36
------------------------------------------------------------------------
On Wednesday, August 14, 2019 Jim Reinardy via CnC-List
<cnc-list@cnc-list.com> wrote:
Hello all,
One of my crew decided to help out by changing out a bent ring on the
pin holding the jib car in place on the track. Unfortunately, he
forgot to move the car away from the hole and the spring retracted the
pin down into the hole once the ring was off. The top of the pin is
now flush with the top of the car. Fortunately, the car is in a
commonly used place, but at some point I would like to be able to move
it again. Anybody dealt with this situation before? This is our
30-2 with Merriman jib cars that I believe were standard on these
boats. Thanks for any suggestions!
Jim Reinardy
C&C 30-2 “Firewater”
Milwaukee, WI
Get Outlook for iOS <https://aka.ms/o0ukef>
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each
and every one is greatly appreciated. If you want to support the list
- use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
