Hi Gerry I believe a lot of the boats have the strut mounted with shims, etc… Can the mount be changed to work with your existing strut to reset the allignmnt? Might involve a bit of glass work but overall not a huge job
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gerald Fennessey via CnC-List Sent: Tuesday, May 28, 2019 11:43 AM To: cnc-list@cnc-list.com Cc: Gerald Fennessey Subject: Re: Stus-List Prop strut No, you would have to use heat, which would make the metal brittle. Its the base of the strut that is bent, which makes bending it back into shape very difficult and not very accurate. -----Original Message----- From: Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com <cnc-list@cnc-list.com> Cc: Hoyt, Mike <mike.h...@impgroup.com> Sent: Tue, May 28, 2019 10:24 am Subject: Re: Stus-List Prop strut Hi Gerry Is it possible to straighten the strut? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gerald Fennessey via CnC-List Sent: Tuesday, May 28, 2019 10:27 AM To: cnc-list@cnc-list.com Cc: Gerald Fennessey Subject: Stus-List Prop strut Hi I have a 1985 C&C 35 MK 3 with a very bent prop strut. Talked to Accutech this am, the company that made the strut is out of business and it could take as long as ten weeks to get a new one cast. If anyone out there knows of a new or used strut for this boat please let me know. Sailing on the hard will not be a fun summer. Thanks Gerry Fennessey Fianna 1985 C&C MK3 9788521424 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
