Mine was 1/4 inch fittings if I remember correctly. Also when I had that problem I found that my solenoid was fine - the pressure regulator was shot and no longer let gas through so I suggest checking that first. Disconnect hose before the solenoid and see if gas will flow through it.
Also check if you have voltage at the solenoid - it could be a wiring or breaker fault. The solenoid should get warm to the touch when on. - - Nathan Post S/V Wisper C&C 34 Lynn MA USA > On May 28, 2019, at 9:15 AM, David Risch via CnC-List <cnc-list@cnc-list.com> > wrote: > > No response from stove so assume it’s the ancient solenoid. Anybody know if > we are ¼ or 3/8 hose size for the three burner oven to replace same? > > Thanks in advance. > > David F. Risch > Gulf Stream Associates > (401) 419-4650 > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
