David, I have some stanchions that did not break or bend in our incident last winter. You are welcome to whatever is still good. I replaced all the stanchions and bases. One thing, though, is that they are pretty “salt-fused” in the sockets. I can check when I get home for exactly what I have intact. Best, Chuck B C&C41 Tenacious Somerset, MA
Sent from my iPhone > On May 21, 2019, at 9:47 AM, CHARLES SCHEAFFER via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hi David, > I straightened two of my stanchions using gentle persuasion. > I think I used a piece of pipe over the outside and clamped the pipe into a > bench vise. > Then I slipped the stanchion into the pipe and using another longer section > of pipe, hand bent the thing straight. > > Chuck S > >> On May 21, 2019 at 8:00 AM David Risch via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> Hello, >> >> A few of my stanchions on my 1981 are not as straight as I would like due >> to years of use and the yard shrink-wrapping around them to the deck. >> Anyone try to straighten theirs? I understanding cold bending S/S is not >> too fatiguing within reason…although they are stanchions and any fatigue >> might be detrimental. >> >> Thanks in advance. >> >> >> David F. Risch >> Gulf Stream Associates >> (401) 419-4650 >> >> >> >> > > >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
