Interesting question Dennis. We steer with a tiller and I don’t think we ever go past 45 degrees. That a lot of rudder but maybe it is nice to know you still have more if you need it. I’m interested to hear what other wheel steerers think. Dave. Kaseler SLY 1975 C&C 33 Sent from my iPad
> On Apr 22, 2019, at 6:08 PM, Dennis C. via CnC-List <cnc-list@cnc-list.com> > wrote: > > I am putting Touche's steering system back together with the upgraded rudder > travel limiting bulkhead installed in the later model 35-1's. Some may > recall my post some time back that rudder travel was limited by two small > bolts installed in the last links on each side of the chain. > > I used a sketch that Neil Gallagher sent me of his rudder limit plate to make > wooden templates to tweak for finalizing the shape before cutting aluminum > ones. These plates strike the newly installed bulkhead. > > As a note, I have taken lots of pictures and am well documenting this entire > project. > > When I tried moving the rudder side to side with the limit plate templates > installed, the rudder travel wasn't even close to what I saw when the travel > was limited by the nuts installed in the chain. There were 4-5 links of > chain left before getting to the link that the stop bolts were installed in. > > So I looked at the top of the rudder to see how much travel it was getting. > It's getting a bit over 45 degrees each side of midships. Sheesh, it must > have been getting to 60 or 70 degrees with the old limit system. > > At 45 degrees, the pulling cable is competely off the curved part of the > quadrant. > > So, my question is "how much rudder travel is enough?" Seems to me anything > past 45 degrees or so might act more like a brake. I can't see using extreme > rudder travel anywhere except in tight quarters in a marina. > > Can I live with 45 degrees? Rob? Chuck? > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
