Listers:
I have an old Merriman snatch block in need of repair. It was under load
last season and not properly closed, which caused it to open and bend the
stainless straps (on the sides) and the pin holding it together. I believe I
can bend the stainless straps back more or less into alignment. However, the
pin is bent and in need of replacement. The pin used by Merriman for this
block is stainless, 2 1/2 inches long (I’m guessing 5/16 diameter) with a head
on one end and internal threads on the other. It is held together by a machine
screw that screws into the threaded end. I suppose I could use a stainless
bolt, but that would not be very elegant. Any ideas?
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
