There is no way those props will work on a direct drive A4. Joe Coquina
-----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rodney Randow via CnC-List Sent: Tuesday, April 02, 2019 4:06 PM To: cnc-list@cnc-list.com Cc: Rodney Randow <rod22gstul...@gmail.com> Subject: [EXTERNAL] Re: Stus-List Prop pitch. And handing cc 33 mk1 1976 From my C&C owner manual: C&C supplied the C&C 33-1 Atomic Four with 16 x 10 x 1" R.H. 2-blade with a 16 x 10 x 1" R.H. Folding Propeller optional. -- Rod C&C 33-1 On 4/2/19 1:19 PM, doug coup via CnC-List wrote: > I have recently purchased mk1, with missing prop. I have seen several other > models but they have different pitches and sizes. I am looking at Martec > folding props used which I believe were standard. > > What is the original spec for this Atomic 4 engine or if you have a newer > better option. > Why. > > > Doug Coup > Renewal by Andersen > 847-452-8087 > > Sent from my iPad > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
